17 Jul
2013
17 Jul
'13
6:31 p.m.
I re-attached the wires and it's working again.
Also: Hol donated a multimeter (!)
Also also: We need a nice little box that can contain the raspberry pi and
a power supply and maybe a few other small things and which looks nice and
can mount on the wall. The craziness with the imac and cardboard box and
wires everywhere is no good. Someone bring a suitable wall-mountable box
(urban ore?) and someone else (maybe me) will make it all pretty.
On Tue, Jul 16, 2013 at 1:08 PM, Max Klein <isalix(a)gmail.com> wrote:
read on if you have a multimeter to lend, or want to
understand the door
more:
==so-far==
a wire came off the rpi gpio pinout.
i looked in the code and realized that it is supposed to go to GPIO11,
reattached it but still wasn't working, even though confrimed opendoor.py
was being called
then i shorted past the relay that gpio11 goes to and the door buzzed.
we dont have a multimeter so i can confirm if gpio11 is going high, or the
relay is burned out.
can you help please?
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-discuss