17 Oct
2015
17 Oct
'15
3:05 p.m.
i regret to inform you that the front door electronic locking mechanism
(omnidoor) is not working. all connections appear to be intact and seem to
have continuity.
however, the beaglebone is powering itself off. the 13v dc power supply
feeding the 6v battery that feeds the 5.2v beaglebone has me concerned. i'm
gonna try 5.2v to power the beaglebone.
any other ideas?
thx
17 Oct
17 Oct
5:53 p.m.
the battery should be 13.8VDC
the AC adaptor that powers the battery from the wall power should be
making 13.8VDC. Is it getting AC power? Check both ends of the cord.
Replace the cord. Unplug the adaptor from the battery and try again, see
if it puts anything out.
If you connect a 12V power supply to it, it will work for now but it takes
13.8V to charge a battery. If the adaptor is dead tell me and i will
bring another one.
In the meantime, please connect a 12v power supply across the battery and
then everything will be fine. If you were on IRC you would see that the
voltage has been steadily dropping since the charger died.
-jake
On Sat, 17 Oct 2015, robb wrote:
i regret to inform you that the front door electronic
locking mechanism (omnidoor) is not working. all connections appear to be intact and seem
to have continuity.
however, the beaglebone is powering itself off. the 13v dc power supply feeding the 6v
battery that feeds the 5.2v beaglebone has me concerned. i'm gonna try 5.2v to power
the beaglebone.
any other ideas?
thx
3353
days inactive
3354
days old
1 comments
2 participants
participants (2)
-
Jake -
robb