---------- Forwarded message ---------- From: Jonathon Duerig &lt;duerig(a)tenrec.builders&gt; Date: Wed, Jan 24, 2018 at 9:01 AM Subject: Re: Oakland SUDO room purchase quoted lighting parts To: jacques revera &lt;jacquesrevera(a)gmail.com&gt; Sorry for not responding sooner, I'll get you the files in DXF format today. I've attached them in DWG format to this email (since that is what I had available without conversion). ... Some notes about the design of the light box: You will need two of each item I sent design files for. The scale of these files is 1 unit = 1 mm. If you want to modify the design to better suit your scanner, you will need to reduce the distance between the lighting module front and lighting module back. This affects the lighting module sides, the large baffles, and the LED base plate. The lighting module sides should be exactly the same, but reduced in width by whatever is necessary to make it sit on the top of your scanner. Similarly, the size of the large baffle needs to be reduced by the same amount along its longest dimension. The LED base plate is made from FR4. I included it in the shipment to you. The reason it is FR4 is that it is meant to hold the lights which means that any heat generated from the lights needs to be accounted for. Something that is flammable or something that might distort and change shape when it gets warm are bad choices. FR4 is great because it is both flame and heat resistant. The plate I sent will be too long. You could deal with this in two ways. One way would be to remove the slots on top of the front/back plates and have it just rest with a bit of overhang. Another way would be to modify the plate so that it fits. You can cut FR4 with a saw (be careful because it is brittle). You can also drill FR4. So you could cut it in half, then drill a couple of holes to bolt it back together as a shorter length. If you do this, be very careful of the dust generated. FR4 is fiberglass-reinforced. And fiberglass dust is dangerous. Or if you have access to a waterjet, you could buy a piece of FR4 pretty cheaply and use the waterjet to cut out a modified piece. If you want to do this, let me know and I can send you the design file for it. You can't cut FR4 with a laser AFAIK (heat resistant, flame resistant). And it would be a bad idea to use a CNC router to cut it out (fiberglass dust is very bad for you). This is why we pay a shop to cut out the LED base plates in batches with a waterjet. But it is much more expensive to cut a one-off piece of a different design. Or if you don't want to modify the design of the lighting module, the alternative is to add on to the scanner some pieces that would allow you to rest the unmodified lighting module on top. I'm not sure how much bigger the lighting module is. But it could be a 2x4 on each side would provide enough extra width for example. I haven't had much experience with the older hackerspace scanners, so I don't know for sure. --- Jonathon Duerig Tenrec Builders LLC On Mon, Jan 22, 2018, at 1:05 PM, jacques revera wrote: DXF is probably what we need. Please send a DXF file. But if you can include the SVG also... This is not my ken and I have not heard back yet. thanks! On Thu, Jan 18, 2018 at 12:01 PM, Jonathon Duerig &lt;duerig(a)tenrec.builders&gt; wrote: I've received your payment. I'll ship to: Don Spark 4130 mera street <https://maps.google.com/?q=4130+mera+street+%0D+Oakland,+CA+94601&entry=gmail&source=g> Oakland, CA 94601 <https://maps.google.com/?q=4130+mera+street+%0D+Oakland,+CA+94601&entry=gmail&source=g> When it is on its way, I'll send along tracking information. And I'm happy to send you design files for the plates as soon as I hear back what format you want them in. --- Jonathon Duerig Tenrec Builders LLC On Wed, Jan 17, 2018, at 2:36 PM, Jonathon Duerig wrote: Hi. You can send a Paypal payment to our orders(a)tenrec.builders email address. Or I can make a custom item in the store for you to purchase. It is up to you which way you want to go. I'll send along the design files for the main panels as well and you can then modify them to suit your size or use them as-is and add your own cross beams or framework to rest it on. Do you have a preferred format (DXF, SVG, something else)? --- Jonathon Duerig Tenrec Builders LLC On Wed, Jan 17, 2018, at 1:23 PM, jacques revera wrote: Hi Jonathan, I really appreciate your help and your work on diybookscanner.org where I am trying to learn all the fundamentals to defeat my reading disability. How do we do this with a credit card? Below is a link is to your quote. I want to purchase the option (2) for $150 for use at Oakland's SUDO room on the 'hackerspace' scanner which came from Noisebridge in San Fran. Email, text or call me at 415-724-1479 <(415)%20724-1479>, Jacques https://forum.diybookscanner.org/ucp.php?i=pm&mode=view&f=0&p=3… Jonathon wrote: (2) You could get the lighting module hardware from me and cut out your own plates for the module itself. I'll provide you with DXF or SVG files. The plates could be cut out of hardboard on a laser cutter (I am pretty sure they had a laser cutter at Noisebridge when I visited there) and then you spray paint them black. And you could cut them out as-is, or tweak the design to better fit your scanner before cutting them out. I'd be happy to give you advice as far as that is concerned. What I would send you includes all the electrical stuff, fixtures, LED lights, hardware, AC adapter, the LED base plate made from FR-4, lenses, etc. So you would get everything but the plates themselves. The price would be $150 and shipping cost to California is included in that price.