SUPER-THANKS to 'Kare Raisu' for bringing the punch down tool and
helping with the first patch panel!
We got the first patch panel completed, and Kare agreed to continue
working on the second one on Wednesday.
The first part took way longer than I expected. Well, it was our first
one ever. We learned lots of little tricks on how to proceed best.
At first it seems like just plug it in and punch it.
There were little unknowns that we didn't know that we now know. :)
>
>
>
> On Sun, Aug 10, 2014 at 6:32 PM, Somebody <somebody(a)riseup.net
> <mailto:somebody@riseup.net>> wrote:
>
> Well, it seems that we don't have a Punch Down tool
> (https://en.wikipedia.org/wiki/Punch_down_tool) to finish the job.
> I even went home and spent about 20 minutes looking for it, no
> luck. Definitely MIA.
>
> Anyway, I have cut the 24 pieces and I am in the process to
> prepare the ends. After that is when the Punch Down tool is
> needed.
> We need that tool.
>
> Please let us know if we may use yours.
>
> Thx!
>
>
>
> On 8/10/14, 5:06 PM, Somebody wrote:
> > The network cable saga continues. Yes, it does. Its tiresome at times. :)
> >
> > Hello All,
> >
> > The two boxes of donated cable are a bit quite confusing,
> at least for me. :)
> > I am not sure if they are really CAT6 or simply CAT5e;
> regardless than it claims to be a "GigaSPEED" cable.
> > I attached an image of their label so you can see what I am
> mean.
> >
> > Anyhow... I am taking the task of setting up the two donated
> CAT5e patch panels between the Switch Rack to Server Rack.
> Hopefully it will be done this evening.
> >
> > And just you know, it won't hurt my feelings if it is
> decided that this cable sucks. We can always remove it, and
> install something that we really know what it is.
> >
> > Thx!
> >
> >
> >
> >
> > On 8/8/14, 2:29 PM, max b wrote:
> > > I totally read up to "should I take them?" and almost
> yelled at my computer YES!!!
> > >
> > >
> > > On Fri, Aug 8, 2014 at 1:45 PM, Somebody
> <somebody(a)riseup.net <mailto:somebody@riseup.net>
> <mailto:somebody@riseup.net> <mailto:somebody@riseup.net>> wrote:
> > >
> > > Hello all,
> > >
> > > Good news! I got an email offering 2 almost full boxes
> of CAT6 cable.
> > >
> > > Should I take them?
> > >
> > > Kidding! I replied yes and went to get them. I will
> bring them in tonight.
> > >
> > > More deets later, I am in my lunch time w the food in
> front of me and I am really hungry. :)
> > >
> > > Thx!
> > > _______________________________________________
> > > sudo-discuss mailing list
> > > sudo-discuss(a)lists.sudoroom.org
> <mailto:sudo-discuss@lists.sudoroom.org>
> <mailto:sudo-discuss@lists.sudoroom.org>
> <mailto:sudo-discuss@lists.sudoroom.org>
> > > https://lists.sudoroom.org/listinfo/sudo-discuss
> > >
> > >
> >
> > --
> >
> > “Our prime purpose in this life is to help others. And if
> you can't help them, at least don't hurt them.” ~Tibetan Quote
> >
> >
> >
> > _______________________________________________
> > sudo-discuss mailing list
> > sudo-discuss(a)lists.sudoroom.org
> <mailto:sudo-discuss@lists.sudoroom.org>
> > https://lists.sudoroom.org/listinfo/sudo-discuss
>
> --
>
> “Our prime purpose in this life is to help others. And if you
> can't help them, at least don't hurt them.” ~Tibetan Quote
>
>
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss(a)lists.sudoroom.org
> <mailto:sudo-discuss@lists.sudoroom.org>
> https://lists.sudoroom.org/listinfo/sudo-discuss
>
>
--
“Our prime purpose in this life is to help others. And if you can't help them, at least don't hurt them.” ~Tibetan Quote
Hey everyone at sudo discuss!
My name is Matt and I am looking for a person who is good with 3D printer
mechanics to work on my Ultimaker v1.
There are only a few minor problems with it such as the axis are
misaligned, and I want to add a heated bed (requires a relay and some
soldering and wiring)
this stuff is super easy for someone who knows what they are doing. i do
not haha.
would anyone be willing to fix this problem for me? I can give you many
frankinscents and muur
Hello all,
Good news! I got an email offering 2 almost full boxes of CAT6 cable.
Should I take them?
Kidding! I replied yes and went to get them. I will bring them in tonight.
More deets later, I am in my lunch time w the food in front of me and I am really hungry. :)
Thx!
Hi sudoers.
I added some donation guidelines so people will know what to bring and what
not to bring to sudo room:
https://sudoroom.org/wiki/Donations
Now we can just point people here if they ask about dropping off donations.
I also added a link to this page from the left menu of the sudo wiki.
Of course feel free to edit/append if you don't agree with the list.
--
marc/juul
Just another note - if Sudoers that are at Omni today could possibly:
- start moving Sudo basmeent things into Sudo any time (copier, etc)
- make a place for those things in Sudo
That'd be great. Thanks!
David
Hi all,
MaptimeSF <http://www.meetup.com/Maptime-SF/> is having an OpenStreetMap
10th Anniversary Party and OSM mapathon this Saturday from 2-5PM at the
Stamen Design office in SF.
I've been meaning to check out MaptimeSF and meet some of the folks in the
geo community in the area and this seems like a perfect occasion.
(Especially since mapping is such a core part of LocalWiki
<http://localwiki.org>) Hope to see you there!
Details:
http://www.meetup.com/Maptime-SF/events/199399492/?fromJoin=199399492
- Marina
Greetings comrades, cronies, & contemporaries,
As I may have intimated, I'm spending the moeity of the month of August
canoe camping on our favorite lake in the Sierras, Utica Reservoir.
<http://www.ebiow.yasashi.net/images/UTICA/> It is really lovely here,
about 3.5 hours from Oakland at about 7,000 feet, great swimming and
hiking, and since this is dispersed camping, you don't have to pay fees,
listen to generators or suck SUV fumes. Anywho, I schlepped along a
metric buttload of extra gear, so if you feel so inclined, please come
on up. I have 3 extra tents, 5 sleeping bags, pads, plates, utensils,
stoves, tables, chairs, cooking gear, the whole magila, so you only need
to bring your clothes and any food you might want to consume (I'll have
plenty of rice and beans, but few other goodies). I'll be here until
August 30th because I have a funeral in Watsonville on the 31st.
August 2014
Su Mo Tu We Th Fr Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
The problem is where I'm camping is not immediately obvious if you
haven't been here before (which many of you have). I'm at Point Edmund,
to those who have been here, our favorite spot. And even many of you
who have been here do not remember the specific directions well. So
best is if you can hook up with my first wife Kathy, who is coming up
Friday the 15th at about 1 PM and Thursday the 21st at roughly 5:30 PM.
She'll be returning Sundays. She has room for 1 or 2 extra folks on the
15th & maybe 1 on the 21st, but you can caravan with her and she can
lead folks to the spot. You can call her on her cell phone at
510-326-9328 or try our home phone at 510-763-0591. Or you can try to
hook up with one of the people who has been here before and of course,
if you know the way, feel free to come by whenever you want.
If there is enough interest I might also go back to the hills in
mid-September for a stretch, about the same time as the infamous Occupy
Utica <http://www.ebiow.yasashi.net/videos/OccupyUticaLake_2013.avi>
escapade last year.
The hopes of the free (or at least the very cheap) world go with you,
Ed
PS: I don't have internet up here and will only be scanning my email
periodically from a nearby internet cafe. Those of you with deep
pockets and ATT phone service can get reception here. Kathleen is not
an internet afficiando. Her schedule is fairly rigid, so if you wish to
join her you should be at Slothaven on time.
Hey guys. My name is Matt.
I don't know if this message went through last time, so I am sending it
again, and sorry if you are seeing this twice
I have a Ultimaker v1 that needs a heated bed added to it ( have the
parts except relay) and the axis' realigned. Simple stuff but I am not
mechanically inclined enough to know what strength relay I need, or know
how to solder and wire things.
If you know how to build a 3D printer, and are confident that you can
handle this task, get in touch through this email deal-e-o and lets talk.
I can get you some money in exchange for your services of course. Or
maybe some prints!
Apologies for the delay. Meeting notes from this week!
tl;dr:
ANNOUNCEMENTS:
- Sudo sponsoring event with Critical Resistance on September 20th w/
Cece McDonald
- Startup weekend Sept 12-14 - 50% discount codes - talk to Brendan...
or just use 'sudoroom'. Free food! $25!
- Next Newbie Night: Wednesday, August 13th, 5-8pm hosted by Juul & Jake!
NEW MEMBERS!
...up for 'extended pondering' this week. Please reply if you have any
objection to these new members!
- Timothy
- Why do you want to be a member? Likes working with other people,
would be nice to work here
- What are you excited to do at sudo room? Hacking on his own stuff,
open source, perhaps collaborators?
- What do you hope to share with Sudo Room? Pair programming, sudo
web infrastructure, doesn't do php really (mostly ruby)
- Hasn't been banned from a hackerspace!
- Boyd
- Why do you want to be a member? I like this new movement for
hacktivism around the world and making things that already exist work
better.
- What are you excited to do at sudo room? I'm not very good with
code, but I think it'd be cool if I was. Found out about sudo from
Andrew/backspace, used to come to the leather workshop. Moved close by,
interested in the mesh. Scarred by previous Comcast employment.
Democratizing internet access. Likes climbing and being handy
- What do you hope to share with Sudo Room? Sharing excitement and
enthusiasm.
- Has not been kicked out of a hackerspace, that they know of.
- Grew up in the midwest. Cops were nice there and gave you ice cream
for wearing your bike helmet.
- Really wants to see the robot do cool things.
CONFLICT RESOLUTION:
(via Hol):
1. No conclusive evidence found to support accusation based on review of
available info over 2 weeks. Whatever we do now sets the precedent for
future cases - person who brought the matter up (daniel) is OK to allow
Phil back in. Felt it was his duty to speak up since the concern had not
been proactively addressed by Phil.
2. Further research continues as to nature of threat to privacy and risk of
disruption from outside groups with ill intentions. Sudoers interested in
the topic of entities related to this accusation, particularly the DAC,
should feel free to get in touch and assist with research.
3. Consensus is a process susceptible to disruption. We should think about
cases when it is better to fork into parallel paths to avoid gridlock, and
consider ways to amend our policies to become structurally hardened against
this type of attack. In some cases, it may seem that consensus on an item
has been reached when discussion is still warranted, and dissenting views
may trigger accusations of intentional disruption. People may have
conflicting views or different approaches socially, legally, etc. Emphasize
respect for different points of view while keeping an eye out for
intentional disruption. Need to be able to handle and attenuate disruption
whether intentional or unintentional.
Meeting minutes recorded for posterity at:
https://sudoroom.org/wiki/Meeting_Notes_2014-08-06
Jenny
http://jennyryan.nethttp://thepyre.orghttp://thevirtualcampfire.orghttp://technomadic.tumblr.com
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
can someone help me understand the unit W/m.K
it's a measurement of thermal conductivity of a material. I don't really
understand. I get W/K or K/W but i don't understand where the meter comes
in.
For a flat material of a specified thickness, i would understand watts per
degree per square meter, but i don't get the single meter thing.
here is an example:
http://www.sciencedirect.com/science/article/pii/S001122759700146X
how does that measurement work?
