- sudo-discuss - sudoroom.org

by Jake

tonight at Hardware Hacking Tuesday, a friend of mine showed up and set his bag down on the floor before greeting others who were here. His bag touched some of the property of someone who had quite a lot of stuff, and that person berated my friend for touching his property without permission and made what I thought was quite a big deal out of it. my friend was very apologetic (I would not have been) but this did little to calm the person down, who seemed deeply offended and continued to try to make my friend feel bad for touching another person's property without permission. i stepped in and told the person that I thought they had quite a lot of stuff, which was spilling into walkways and very uncontained, and I asked them to please move some of it out of the way. They responded that they were just going to leave because I had made them feel "unwelcome". They then packed up their stuff and left. the item in question, that was "touched" by my friends' bag, was a sleeping bag. -jake

8 years, 5 months

1
0
0 0

Crow Funding for Students (Q'eqchi', Kiche, and Mam) in Guatemala

by danarauz＠gmail.com

Hello Sudoroom folks, I hope you don't mind me sending this email to the list, but I hope some of you could help these students. Please, when you get a chance, see the details+images on this page I put together. https://www.youcaring.com/help-escuela-chajsaquil-recover-from-flood The short version is that, on October 5th, a tropical storm flooded the Escuela Mixta Official Barrio Chajsaquil and their already old furniture got ruined even more. How I learned about this is because I joined their Facebook group after meeting its principal and knowing the building itself when I was traveling in Guatemala in Dec. 2016. This time I was wondering if you know of someone/organization/company that could help the school economically to bring these students new desks, and other needed school furniture. The list its in the fundraising page linked above. If so, please share the link and this email if you want. In regards of donors wanting a tax exempt form, I am in the process of getting approved by OmniCommons. So they can be the financial sponsor; so Omni be the one sending the money to the school. We are open to the person/organization/company also being the direct donors to the school itself. The school location: Escuela Official Barrio Chajsaquil San Pedro Carcha, Alta Verapaz Guatemala Thank you, and thank you for all you do to make this world a better place. Sincerely, Daniel Arauz Cell: 415.336.9143 <(415)%20336-9143> Signal: 415.336.9143 <https://whispersystems.org/>

8 years, 5 months

1
0
0 0

Do your own damn dishes!

by Jenny Ryan

Image: plexiglass box containing 6+ dirty bowls and cutlery from tonight's sudo party. Whiteboard marker text reads: "THERE IS NO MAID HERE - ONLY HAPPY RATS. CLEAN YOUR SHIT AND A LITTLE EXTRA!" Signed: "Jenny does not do sudo dishes"

8 years, 5 months

3
2
0 0

Anyone need an old 20, 000 RPM centrifuge? (needs service)

by Marc Juul

I put it on Craigslist here: https://sfbay.craigslist.org/eby/tls/d/sorvall-superspeed-ss-3/6336958262.h… but if anyone in the community has a use for it I'll let it go for $20 (what it cost me) or if BioCurious has a need for it you can have it for free. -- marc/juul

8 years, 6 months

1
0
0 0

PO Box

by Kyle Mitchell

USPS sent me the renewal notice for our PO box at the Shattuck post office, across the street. Can we safely let the box --- and the $200 bill --- go? Or might Omni have some use for it? I have a key. I believe Matt still has the other.

8 years, 6 months

1
0
0 0

Looking for a job?

by danarauz＠gmail.com

Hello Folks, A copy paste from an email that arrived in my work inbox. I don't know anyone there, and I have no connection with them, but once having a webinar with their sales rep.: IX Systems is looking for the following: "- Sales Engineer - Federal Strategic Account Representative - Customer Hardware Support Technician - Storage Performance Analyst - Technical Marketing Engineer - Senior Systems Engineer/Architect - Sales Development Representative - Customer Support Engineer (Tier 1, Tier 2, Tier 3) - Account Manager - Servers/Storage - Open-Source Internship Opportunities" More info at: https://www.ixsystems.com/careers/ -- Daniel Signal: 415.336.9143 <https://whispersystems.org/> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8 years, 6 months

1
0
0 0

Sudo Finance Report (check yr payments!!)

by Jenny Ryan

Sudo's current balance is now* $3,567.91, *which includes the $4000+ of Bitcoins we cashed out last month. Income over the past 30 days was *$1,367.59* - which includes a one-time $150 gift to cover the costs of the U-Haul trip to pick up the new cabinets. This means we are effectively *losing around $80**0/month, and will be back to broke by February*. Please check that your payments via sudoroom.org/humans are processing! It may be prudent to begin planning an early 2018 crowdfunding campaign, but in the interim, please set up payments / check on your payments asap. Cash payments can be given directly to either myself or Charley. <3 jnny

8 years, 6 months

1
0
0 0

Re: [sudo-discuss] sudoroom needs bandsaw blade plate

by Jake

i have installed the bandsaw tires and the saw is ready to be used, but it needs the plate. it should be 1.5" square, 0.125" thick, made of aluminum or steel. it needs a slot cut into it for the blade, but this can be done (carefully) using the running blade to create its own clearance in the piece. do NOT use the bandsaw to cut anything until this square throat plate is made. -jake On Tue, 29 Aug 2017, hol(a)gaskill.com wrote: > 10-4 I just found a 1/8 piece of aluminum here at home, will try to remember > to bring and cut to fit next time I'm heading over. > > On 2017-08-29 16:06, Jake wrote: >> it just rests in there, but it has to be pretty precise. >> >> On Tue, 29 Aug 2017, hol(a)gaskill.com wrote: >> >>> Should be easy to make on the chop saw - how does it secure to the table? >>> >>> On 2017-08-26 17:12, Jake wrote: >>>> i am ordering repair parts for the sudoroom bandsaw, including "bandsaw >>>> tires" >>>> (rubber rings that ride on the rollers inside the saw so the blade >>>> doesn't fall >>>> off anymore) >>>> >>>> but it's still missing the "throat plate" or "table insert" which is a >>>> square >>>> plate with a slot cut into it, and it's what holds up the material being >>>> cut. >>>> >>>> it needs to be 1/8" thick and 1.5" square, and then we can use the >>>> bandsaw to >>>> cut the slot into it (that's the easy part) >>>> >>>> it looks a lot like this, except it should be made of metal ideally: >>>> https://cdn.instructables.com/FJG/0GY9/H82U8CS5/FJG0GY9H82U8CS5.LARGE.jpg >>>> >>>> however if it's made of plastic or acrylic or something not as strong as >>>> metal, >>>> it will have to be thicker than 1/8" (except at the edges where it has to >>>> sit >>>> on the shelf) >>>> >>>> here's a video of someone making one from scratch: >>>> https://www.youtube.com/watch?v=hsWLQDdWlG0 >>>> >>>> can someone make this plate? ideally out of aluminum, i think. >>>> >>>> -jake >>>> _______________________________________________ >>>> sudo-discuss mailing list >>>> sudo-discuss(a)lists.sudoroom.org >>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>> >

8 years, 6 months

1
0
0 0

Invoice 1187 from Omni Commons

by Omni Commons

Dear Sudo Room, Here's your invoice! We appreciate your prompt payment. Thank you for stewarding the commons. Love and solidarity, Omni Commons ------------------------ Pledge Summary -------------------------- Invoice # : 1187 Invoice Date: 09/01/2017 Due Date: 09/25/2017 Terms: Net 25 Amount Due: $2,000.00 The complete version has been provided as an attachment to this email. ---------------------------------------------------------------------

8 years, 6 months

2
1
0 0

Puerto Rico Mesh?

by Romy Ilano

OK, hope you are all doing fine! Saw the mesh workshop this weekend. Question : I know someone living on Puerto Rico and nobody has heard from her since September 18th! I know the whole island is cut off--in which scenarios could you Puerto Rico mesh your way back to civilization? I'm totally floored, are they going to be cut off for long? Will they be able to fly balloons or wacky ships out there? Drop an emergency underwater cable to the nearest internet island? How does this work? ============================= Romy Ilano romy(a)snowyla.com

8 years, 6 months

1
0
0 0

Invoice 1202 from Omni Commons

by Omni Commons

Dear Sudo Room, Here's your invoice! We appreciate your prompt payment. Thank you for stewarding the commons. Love and solidarity, Omni Commons ------------------------ Pledge Summary -------------------------- Invoice # : 1202 Invoice Date: 10/01/2017 Due Date: 10/25/2017 Terms: Net 25 Amount Due: $2,000.00 The complete version has been provided as an attachment to this email. ---------------------------------------------------------------------

8 years, 6 months

1
0
0 0

bandsaw fixed

by Jake

I got new "bandsaw tires" and installed them in the sudoroom bandsaw, and installed them, but i haven't tested it. someone who feels confident should go ahead and test it. i set the blade tension as a guess so i don't know if it's right. also we still need a 1.5" square plate (0.125" thick) for the hole in the deck where the blade goes through. -jake

8 years, 6 months

1
0
0 0

208V transformer?

by Patrik D'haeseleer

Does anyone happen to have a 208V transformer sitting around, or know where to best get one? We have a new (old) centrifuge that requires 14A @ 208V. We currently have it plugged in to our spare 230-240V outlet. Most equipment can handle +/- 10% of rated voltage, but that is likely decrease its lifespan over the long term. For the unenlightened, 208V is two phases of a 3-phase system. We have the more usual 2x120V circuit instead. See https://ctlsys.com/support/electrical_service_types_and_voltages/ Thanks! Patrik

8 years, 6 months

4
5
0 0

Last Call for makers for East Bay Mini Maker Faire

by Patrik D'haeseleer

Walking distance from the Omni; very community and family oriented event; much more intimate and less commercial than the giant San Mateo Maker Faire. Counter Culture Labs will be there. Anyone else? Patrik ---------- Forwarded message ---------- From: East Bay Mini Maker Faire <info(a)ebmakerfaire.com> Date: Sun, Sep 17, 2017 at 7:45 PM Subject: Early Bird ticket prices end Monday // Last Call also for Makers To: info(a)biocurious.org Prices go up Monday at midnight for the East Bay Mini Maker Faire 2017 Show and tell in Oakland on Sunday, October 22nd! <http://parkdayschool.us2.list-manage2.com/track/click?u=41b5f7bd2242e26ef4d…> Is this email not displaying correctly? View it in your browser <http://mailchi.mp/1d23029fc97b/early-bird-ticket-prices-end-monday-last-cal…>. Get your Early Bird tix now—prices go up Monday @midnight Just a reminder for East Bay Mini Maker Faire fans that now is the best time to grab your tickets <http://parkdayschool.us2.list-manage2.com/track/click?u=41b5f7bd2242e26ef4d…> for our massive and wonderful Show&Tell&Make coming up in Oakland on Sunday, October 22nd. Prices go up at 11:59 PM on Monday the 18th. Amazing things will be waiting for you on October 22nd: - *autonomous vehicle racing *with the DIYRobocars community—plus a talk on this by Chris Anderson <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…> - Crazy great *20' LaserMaze* by Benicia Makerspace - *"ChickenVR"*—a virtual reality experience of a chicken coop by Black Pine Circle maker club - A chance to try *welding* with Young Sparks Foundation - Full-tilt *dance battle* hosted by TURFinc <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…> . So much more taking shape. STAY TUNED for regular content updates by following us on Facebook <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…> or Instagram <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…> or Twitter <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…>. See you October 22nd! —the East Bay Mini Maker Faire team ------------------------------ ------------------------------ Like us on Facebook <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…> Follow on Twitter <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…> Forward to a Friend <http://us2.forward-to-friend.com/forward?u=41b5f7bd2242e26ef4d81f9a8&id=33d…> *Also.. Last Call for Exhibitors and Presenters!!* We still have room for a few more cool exhibits, as well as Dark Room pieces. Also looking for talks for our *Maker Skillz* room—any kind of "getting started" or "how-to" Maker tech talks. All you need to do to indicate your interest is complete the form here on our Call for Makers <http://parkdayschool.us2.list-manage.com/track/click?u=41b5f7bd2242e26ef4d8…> page. If you have questions or ideas that you'd like to talk through, please get in touch by writing makers(a)ebmakerfaire.com <+makers(a)ebmakerfaire.com>. We are here to flesh out your ideas and answer your questions! But don't delay—the window is closing for us to consider and place new makers, so fill out the form ASAP. *East Bay Mini Maker Faire is independently organized and operated by Park Day School under license from Maker Media, Inc. <http://parkdayschool.us2.list-manage2.com/track/click?u=41b5f7bd2242e26ef4d…>* unsubscribe from this list <http://parkdayschool.us2.list-manage.com/unsubscribe?u=41b5f7bd2242e26ef4d8…> | update subscription preferences <http://parkdayschool.us2.list-manage.com/profile?u=41b5f7bd2242e26ef4d81f9a…>

8 years, 6 months

1
0
0 0

Counter culture idea

by Jake

---------- Forwarded message ---------- Date: Fri, 15 Sep 2017 02:47:30 +0000 (UTC) From: Eric Reiter <unquant(a)yahoo.com> Hello Counter Culture and Sudo-room people. My current research effort is toward electromagnetic medicine. In past years I automated an enzyme reaction and applied tuned electromagnetic fields, from radio-frequency to ultraviolet in search for a non-thermal reaction rate effect. Now I am concentrating on millimeter wave tuning to promote a gene expression or enzyme reaction. I seek collaboration with a biologist to perform experiments in-vitro and later in-vivo. I plan to visit Counter Culture Lab this Tuesday evening and will elaborate on my resources and strategy. Attached is the microwave enzyme stimulator under construction in my lab. I have additional projects that are developed but beg for collaboration: Resolution of wave-particle duality (this worked, see link), ultimate connectors, slanted spine bookbinding, and musical instrument inventions. Thank You, Eric Reiter Pacifica CA 650 738 9255 website: Resolution of Wave-particle Duality - Threshold Model Physics - Unquantum Effect Experiments and theory toward resolving the wave-particle-duality problem in quantum mechanics. http://unquantum.net/

8 years, 6 months

2
2
0 0

help needed tonight for bookfair prep!

by Jenny Ryan

We need to demo the wooden bookcase in the far corner of sudo bordering ccl and move two of the cabinets in there. They've already been cleared off and sorted. There's a lot of junk to move to trash or my car for an ewaste run tmrw. Right now just me n robb hustlin. If anyone's got a cycle in them to demo, move the cabinets and/or clean, would be hella rad!

8 years, 6 months

1
0
0 0

Re: [sudo-discuss] [Noisebridge-discuss] T-962A Reflow Oven Firmware Upgrade!

by Morgan Allen

Do you have any reference links for the upgrades? We have the same over at Sudo and I've noticed it's pretty inconsistent. Wondering if we should pursue upgrading as well. On Thu, Sep 14, 2017 at 6:50 PM, Travis Briggs <audiodude(a)gmail.com> wrote: > I think the list for discussion of lists themselves is: > > rack(a)lists.noisebridge.net > > Cheers, > -Travis > > On Thu, Sep 14, 2017 at 5:40 PM, Revolt <revoltrightnow(a)gmail.com> wrote: > >> A while back I bought some parts and did some research on how to >> upgrade NB's reflow ovens. >> >> Now that I can enter the space again, I met up with Nick last night >> and we hacked on one for hours. This is the result: >> >> mediafire.com/file/h8thuawah97gldg/Firmware%20upgrade%20for% >> 20T-962A%20Reflow%20NB%20with%20Nick.mp4 >> >> -Zach >> >> P.S. is there any way to upload videos to the NB wiki? >> >> P.P.S. sorry to keep double posting to the list, but my emails keep >> bouncing from my hotmail addy (and my yahoo before that). Anyone know >> who the admins are for NB Discuss? >> _______________________________________________ >> Noisebridge-discuss mailing list >> Noisebridge-discuss(a)lists.noisebridge.net >> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss >> > > > _______________________________________________ > Noisebridge-discuss mailing list > Noisebridge-discuss(a)lists.noisebridge.net > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss > >

8 years, 6 months

2
2
0 0

Anarchist Bookfair and BASTARD Conference this weekend

by Laura Turiano

Hi everyone, A final update/reminder for this weekend's activities. The Bookfair and Bastard conference will be using the entrance hall and ballroom this weekend and those spaces need to be completely clear to fit the bookfair tables. I'll be working on moving stuff today and tomorrow if anyone has some time to help out. Message or email me to find out when I will be at the Omni. The set up crew from the Bookfair will be here Friday night. These events are a great opportunity for collectives to share info with activists. Omni doesn't have an official table, but Julian has volunteered to coordinate one that will be located somewhere else in the building. Thanks Julian! He sent an email about this a day or so ago. Please be in touch with him to take a tabling shift or give him materials from your collective that you would like to have at the table. I would love to see some kind of activities going on in Sudo and CCL to showcase what you all are doing. Collectives and related groups that DO have Bookfair tables are Phat Beets, TIL, GWS, Stinney Distro. FNB will be serving. If you are interested inn helping any of them with their tables, please contact them directly. If you would like to help out with Omni tasks during the Bookfair, let me know. If you want to help during BASTARD Conference, Katrina is the point person. - Laura

8 years, 6 months

1
0
0 0

Re: [sudo-discuss] Cabinets for donation

by robb

Me thinks they'd be best between sudo/ccl. Maybe put combo lock on one for active projects On Sep 14, 2017 12:26 PM, "Adam" <me(a)adammunich.com> wrote: I may be able to make it buy sunday, definitely tuesday. It's probably easier to put them in the basement until we figure out where they should go in sudo. Against the back wall? Replace the dividing wall between sudo and ccl? Where should the material stock go, where the wire rack is now? So many questions :-) - - - - Begin automatically generated footer - - - - I seek to understand, and aim to create. Weblog: http://adammunich.com PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich On Thu, Sep 14, 2017 at 8:38 AM, robb <sf99er(a)gmail.com> wrote: > though i know they can't stay there long, we may have to move em to the > basement if we can't get them all placed in sudo by tomorrow. > i don't want to disturb the javascript meetup > > On Thu, Sep 14, 2017 at 8:14 AM, Jenny Ryan <tunabananas(a)gmail.com> wrote: > >> They are in the entrance hall and we will need to get them into sudo by >> tomorrow (bookfair setup). >> >> Work party tonight, anyone? >> >> On Sep 12, 2017 10:13 PM, "Adam" <me(a)adammunich.com> wrote: >> >>> I'd say let's get all of them, we'll keep extras in the basement if we >>> don't need them all immediately. >>> >>> Otherwise it'll be a more than a hundred dollars each to buy more later. >>> >>> >>> - - - - Begin automatically generated footer - - - - >>> >>> I seek to understand, and aim to create. >>> Weblog: http://adammunich.com >>> >>> PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich >>> >>> On Tue, Sep 12, 2017 at 12:27 PM, robb <sf99er(a)gmail.com> wrote: >>> >>>> Picking up cabinets today. Do we want all 6? >>>> >>>> On Aug 23, 2017 10:46 PM, "Adam" <me(a)adammunich.com> wrote: >>>> >>>>> Flat-bed trailers from u-haul are approximately $20 and don't charge >>>>> for miles. >>>>> >>>>> >>>>> - - - - Begin automatically generated footer - - - - >>>>> >>>>> I seek to understand, and aim to create. >>>>> Weblog: http://adammunich.com >>>>> >>>>> PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich >>>>> >>>>> On Wed, Aug 23, 2017 at 9:35 PM, <hol(a)gaskill.com> wrote: >>>>> >>>>>> oh man that might not work w/ my work for next friday. I used to >>>>>> commute to belmont and it could be 1-1.5 hour one way in traffic. I'll >>>>>> confirm one way or other on monday. If I can swing it timewise I'm happy >>>>>> to drive or ride along as a loader if we don't find a trailer. >>>>>> >>>>>> On 2017-08-23 18:50, robb wrote: >>>>>> >>>>>> cabinets are in portola valley...1 hr drive >>>>>> >>>>>> On Wed, Aug 23, 2017 at 2:46 PM, niki <niki.shelley(a)gmail.com> wrote: >>>>>> >>>>>>> Y'all can borrow my truck if needed. >>>>>>> >>>>>>> On Wed, Aug 23, 2017 at 10:10 AM <hol(a)gaskill.com> wrote: >>>>>>> >>>>>>>> From talking to folks last night it sounded like those books are >>>>>>>> pretty actively used so while it makes sense to move them out of the shop >>>>>>>> area, they shouldn't move too far. >>>>>>>> >>>>>>>> Also who has or has access to a light flatbed trailer? I can pick >>>>>>>> up up next friday afternoon if a trailer and one or 2 people can come along. >>>>>>>> >>>>>>>> On 2017-08-22 13:08, Adam wrote: >>>>>>>> >>>>>>>> Why not move the books to the front room? It was quite charming >>>>>>>> having a reading area there in the beginning. >>>>>>>> >>>>>>>> On Aug 22, 2017 12:36 PM, <hol(a)gaskill.com> wrote: >>>>>>>> >>>>>>>>> if anyone has access to a light trailer in good condition we could >>>>>>>>> borrow, I can finish my hitch install (we're just down to the harness) in >>>>>>>>> time to tow it next Friday. >>>>>>>>> >>>>>>>>> On 2017-08-19 10:19, robb wrote: >>>>>>>>> >>>>>>>>> ok, we're set to pick em up around the 1st of sept >>>>>>>>> if anyone has a vehicle that we can use to transport them, plz, >>>>>>>>> let the list know :) >>>>>>>>> otherwise, Barbara will have to pay for renting a truck :( >>>>>>>>> we'll need another person, besides me, to help get them in the >>>>>>>>> truck too >>>>>>>>> cheers >>>>>>>>> >>>>>>>>> On Fri, Aug 18, 2017 at 4:33 PM, Adam <me(a)adammunich.com> wrote: >>>>>>>>> >>>>>>>>>> Re-Joined list; >>>>>>>>>> >>>>>>>>>> Anyway yes, I checked out these cabinets and overall they look >>>>>>>>>> pretty solid. They would be very ideal for storing parts in, as well as >>>>>>>>>> flammables which probably shouldn't be left out... (eg, oils, alcohols). >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> - - - - Begin automatically generated footer - - - - >>>>>>>>>> >>>>>>>>>> I seek to understand, and aim to create. >>>>>>>>>> Weblog: http://adammunich.com >>>>>>>>>> >>>>>>>>>> PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> sudo-discuss mailing list >>>>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>>>>> >>>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> sudo-discuss mailing list >>>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>> sudo-discuss mailing list >>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> sudo-discuss mailing list >>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>> >>>>>>> >>>>> >>> >>> _______________________________________________ >>> sudo-discuss mailing list >>> sudo-discuss(a)lists.sudoroom.org >>> https://sudoroom.org/lists/listinfo/sudo-discuss >>> >>> >

8 years, 6 months

3
3
0 0

Re: [sudo-discuss] Cabinets for donation

by Adam

Re-Joined list; Anyway yes, I checked out these cabinets and overall they look pretty solid. They would be very ideal for storing parts in, as well as flammables which probably shouldn't be left out... (eg, oils, alcohols). - - - - Begin automatically generated footer - - - - I seek to understand, and aim to create. Weblog: http://adammunich.com PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich

8 years, 6 months

5
15
0 0

Hardware Hack Night guest

by Morgan Allen

I found myself chatting with Joseph Coffland of Buildbotics ( https://buildbotics.com/) and he's interested in checking out the space next week. Sounds like a possible demo of their fantastic looking CNC controller? Should be a good time, I'll plan on being there. Cheers, Morgan

8 years, 6 months

3
2
0 0

Missed the alert, Sudoroom.org was down for 8 hours, 16 minutes and 42 seconds.

by danarauz＠gmail.com

"Tue, Sep 12, 2017 at 9:46 PM" "The monitor sudoroom.org (https://sudoroom.org) is back UP (HTTP 200 - OK) (It was down for 8 hours, 16 minutes and 42 seconds)." Sorry I missed the alert, I was too busy at Noisebridge at Chalsea's interview. :) -- Daniel Signal: 415.336.9143 <https://whispersystems.org/> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

8 years, 6 months

2
2
0 0

Status of SR website?

by aaronco36

Hey all, Tried reaching main website https://sudoroom.org several times this afternoon and evening. It doesn't seem to be responding. Also tried..... - using 'sudo ping www.sudoroom.org', it times out and doesn't complete - ditto " for 'sudo ping 104.236.181.202' " - 'sudo traceroute www.sudoroom.org' reaches last router digitalocean-ic-302451-sjo-b21.c.telia.net (62.115.34.18) in 24.010 ms 23.958 ms 24.266 ms and then doesn't complete its roundtrip The fact that you all may be receiving this email _separately_ rather than from the sudo-discuss list also indicates something is wrong. Any idea of what's going on and/or what needs to be done? Best, -Aaron aaronco36(a)sdf.org SDF Public Access UNIX System - http://sdf.org

8 years, 6 months

2
1
0 0

proposal: get space ready by sep 15th, host open house on 16th?

by Jenny Ryan

Greetings sudo! We've had some great momentum these past few weeks, especially on Tuesday nights, organizing our resources and separating the cruft. On September 16th, the Omni will be hosting the Bay Area Anarchist Bookfair, and thus the building will be swarming with awesome radicals from all over. I propose having the space looking spacious and beautiful by September 15th. Abe suggested this would be a great opportunity for us to host some workshops in the back. At last night's mesh meeting, we discussed having a mini-BYOI (Build Your Own Internet) workshop, and announce the larger one we'll be hosting the following Saturday for those interested in learning more. The Bookfair runs from 10am-6pm. Robb and I are thinking we should organize an afterparty. Not sure if there is anything already planned, but it makes sense and would be hella fun :) Thoughts / volunteers to host an open house, afterparty and/or some other workshops that day? -- Jenny Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate `~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~` "Technology is the campfire around which we tell our stories." -Laurie Anderson "Storytelling reveals meaning without committing the error of defining it." -Hannah Arendt "To define is to kill. To suggest is to create." -Stéphane Mallarmé ~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`

8 years, 6 months

1
1
0 0

can you host hardware hacking tuesday tomorrow?

by Jake

I won't be able to make it to sudoroom tomorrow night until late, can someone please arrive at sudoroom by 7pm to host Hardware Hacking Tuesday tomorrow? thank you, -jake

8 years, 6 months

2
1
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss