sudo-discuss

sudo-discuss@sudoroom.org

12 participants
7488 discussions

by Marc Juul

I'm starting to play around with electrowetting (specifically the OpenDrop) and I'm having trouble finding a source for extruded ETFE film of a thickness of at most 50 micrometer. Any ideas? Anyone have experience with ultra hydrophobic coatings or spin coating? -- marc/juul

8 years, 8 months

Fwd: Join us for Microscopy 101 & 401 class at CCL Sat morning!

by Patrik D'haeseleer

*Join us for our Microscopy meetup tomorrow morning at CCL <https://www.meetup.com/Counter-Culture-Labs/events/241864024/>! *We'll have something for newbies and experts alike... We'll give a tour of the microscopes we have available at CCL, show you which one to use for which purpose, how how to use them, and which ones to prioritize for repair. Feel free to bring in your own scope if you have one, and we'll be happy to teach you how to use it (and/or diagnose what's wrong with it...) For the microscopy experts, we'll also go over the fancy super-resolution STED microscope we've just been donated by BioCuriuous! This kind of equipment would normally start in the $200K range. A dedicated team at BioCurious spent more than a year building this one from scratch <https://sites.google.com/site/biocuriousmicroscopewiki/>, starting from the microscope engine out of a donated GA IIx DNA sequencer - a piece of machinery that probably cost well over $500K itself when it was new just a few years ago. A truly unique piece of equipment. STED microscopy <https://en.wikipedia.org/wiki/STED_microscopy> is one of the techniques used to break the diffraction limit in optical microscopy, allowing visualization of subcellular structures that were previously only accessible using electron microscopy! We are looking to build an expert user group around this new instrument, so come join us and help us get it up and running to do some awesome science with it! Patrik

8 years, 8 months

bicycles and parts gathering in sudoroom

by Jake

there is a bicycle frame without wheels, a fender, and five wheels and three tires floating around sudoroom, as well as two bicycles that do not belong to anyone who is here right now. I don't think people should be using sudoroom as a place to store their vehicles, and large projects like bicycles should not be stored here except for very limited situations like a project that takes more than one day. People have been working very hard on cleaning up the space and the electronics waste pile is huge. It will be cleared out soon and I hope we can deal with the bicycles too, and then we can start looking at other large items like the embroidery machine and juki sewing machine table, and get those out of here. If anyone knows whose bicycle frame and wheels these are, or whose whole bicycles these are being stored here, please ask them to take them somewhere else when they're not visiting sudoroom. what do people think of that? -jake

8 years, 8 months

Event this Saturday: 4Love, Science and Liberation

by Julio Rios

Hey Commoners, I'll be helping out with this event Saturday morning 10am-1pm. stop by the ballroom if it sounds interesting to you. How can science be used as a tool for liberation? Scientists and community organizer, Kendra Krueger, guides us through a process of reclaiming science as a tool for personal and social liberation. We’ll take a look at decolonizing the language of our current scientific paradigm and exploring the intersections of science, social justice, art and intuitive technologies. Using movement, games and physics we’ll reintegrate the analytical and intuitive mind and discover new methods to liberate our mind, body and spirit through knowledge, knowing and finding out. Kendra A Krueger *4Love, Science and Liberation* ------------------------------ www.4loveandscience.com Facebook: 4love+science Instagram: 4loveandscience Youtube: https://www.youtube.com/channel/UC5eGNz9V9tnhWjexMXCUTcg

8 years, 8 months

Re: [sudo-discuss] pick&place machine .csv file dissection

by Jake

OK i renamed the repository to pos2charmhigh to match the true name so the new link is: https://github.com/sudoroom/pos2charmhigh/ Miloh was doing some work on the machine earlier tonight, but he's into using GEDA not KiCAD, but i'm sure his contributions will lift all boats. you can push to: git@github.com:sudoroom/pos2charmhigh.git thank you -jake On Tue, 25 Jul 2017, Morgan Allen wrote: > there was a rational behind calling the repo pcb2... but... dunno > > Anyhow, pos2... is for the fact the KiCad outputs .pos (position) files. > > Feel free to collaborate where ever, hopefully no one forces you to sign up > for GitHub. > > As for future updates, I can push where ever is most useful. > > -------------------------------------------------------------------------------------------------------------------------------------- > 2017 Hackaday Prize Entry > Any Colored Button <https://hackaday.io/project/19880-any-colored-button> > > Step 1. Press Button > Step 2. ***startupy hand waving*** > Step 3. Profit! > > Likes = Votes. Votes = $1s. $1s = Profits. > > Step 2 = Vote for Any Colored Button > <https://hackaday.io/project/19880-any-colored-button>. > > On Tue, Jul 25, 2017 at 11:26 PM, Jake <jake(a)spaz.org> wrote: > >> Morgan, i am confused, what's the difference between pcb2charmhigh and >> pos2charmhigh? >> >> I have pcb2charmhigh which i got from github here: >> https://gitlab.com/morganrallen/pcb2charmhigh.git/ >> >> i can't find the source to pos2charmhigh because gitlab doesn't seem to >> allow >> me to view the source, if it's even there, without creating a login... >> which I >> don't want to do, partially because they're trying to force me to. >> >> Anyway, I forked pcb2charmhigh to a sudoroom repository here: >> https://github.com/sudoroom/pcb2charmhigh >> >> so that I and Miloh and others can collaborate on it. >> >> Will you be updating the pcb2charmhigh repo on gitlab? At least I can >> pull from there. >> >> thank you, >> -jake >> >> On Sun, 9 Apr 2017, Morgan Allen wrote: >> >> I worked on a thing today. >>> https://www.npmjs.com/package/pos2charmhigh >>> >>> (roughly) converts KiCAD .pos files to something that resembles the >>> Charmhigh CSV file. I haven't tested the output yet. >>> >>> Jake, when you did your first test run did you run into any issues with >>> negative X/Y coords? When I was trying to set a component local [ 0, 0 ] >>> was about 1.5" right of the actual components. I could jog it into place >>> once with no problem. Then I'd get an error about a negative position. I >>> might make it back later tonight to do some more testing. >>> >>> ------------------------------------------------------------ >>> ------------------------------------------------------------ >>> -------------- >>> 2017 Hackaday Prize Entry >>> Any Colored Button <https://hackaday.io/project/19880-any-colored-button> >>> >>> Step 1. Press Button >>> Step 2. ***startupy hand waving*** >>> Step 3. Profit! >>> >>> Likes = Votes. Votes = $1s. $1s = Profits. >>> >>> Step 2 = Vote for Any Colored Button >>> <https://hackaday.io/project/19880-any-colored-button>. >>> >>> >>> On Wed, Feb 15, 2017 at 3:24 PM, Jake <jake(a)spaz.org> wrote: >>> >>> the machine menu is entirely in english. >>>> >>>> awesome job translating! >>>> >>>> >>>> On Wed, 15 Feb 2017, miloh wrote: >>>> >>>> are there english menu options? >>>> >>>>> >>>>> used google translate to get some menu image translations in case >>>>> there aren't any. >>>>> >>>>> On Wed, Feb 15, 2017 at 2:42 PM, miloh <froggytoad(a)gmail.com> wrote: >>>>> >>>>> chrome browser reads the unicode chinese characters in your text file. >>>>>> >>>>>> http://spaz.org/~jake/pix/pnp/placeonepart.txt >>>>>> >>>>>> google translate makes a lot of sense with these strings. >>>>>> the pinyin is useful for cafl speakers who dont read as much hanyu to >>>>>> sound out everything >>>>>> >>>>>> >>>>>> %,原点偏移,X,Y, >>>>>> %,Yuándiǎn piān yí,X,Y, >>>>>> %,origin offset,X,Y >>>>>> >>>>>> %,料栈偏移,料栈号,X,Y,进给量,注释 >>>>>> %, Liào zhàn piān yí, liào zhàn hào,X,Y, jìn jǐ liàng, zhùshì >>>>>> %, Material stack offset, material stack number, X, Y, feed, comment >>>>>> >>>>>> this might befor arrays. >>>>>> >>>>>> %,拼板1,X,Y, >>>>>> %, Pīn bǎn 1,X,Y, >>>>>> %, Puzzle 1, X, Y, >>>>>> >>>>>> you had me at 'puzzle' >>>>>> >>>>>> %,贴头号,料栈号,X,Y,角度,高度,跳过,速度,说明,注释 >>>>>> %, Tiē tóuhào, liào zhàn hào,X,Y, jiǎodù, gāodù, tiàoguò, sùdù, >>>>>> shuōmíng, zhùshì >>>>>> %, Sticker number, material number, X, Y, angle, height, skip, speed, >>>>>> description, comment >>>>>> >>>>>> good bits here >>>>>> >>>>>> >>>>>> >>>>>> On Wed, Feb 15, 2017 at 2:29 PM, Jake <jake(a)spaz.org> wrote: >>>>>> >>>>>> last night i programmed the pick&place machine to place a capacitor >>>>>>> from >>>>>>> material slot 3 onto this board, rotating 90 degrees in the process, >>>>>>> and >>>>>>> placing it perfectly. >>>>>>> >>>>>>> here's the video: >>>>>>> https://www.youtube.com/watch?v=AuNQKG_SQ30 >>>>>>> >>>>>>> anyway, i made the machine save the program to a .csv file which it >>>>>>> named >>>>>>> new1.csv and then i copied it and inserted comments for us to discuss, >>>>>>> each >>>>>>> delineated by a # sign. Note that I do not expect the machine to >>>>>>> allow >>>>>>> comments in .csv files it's given, but i wanted to show where my >>>>>>> comments >>>>>>> were. >>>>>>> >>>>>>> I don't know what the upper-ASCII encoding is, but it's surely >>>>>>> chinese, >>>>>>> so >>>>>>> if >>>>>>> anyone can figure out how to convert and translate it that might help >>>>>>> us. >>>>>>> Also >>>>>>> the manual is in Chinese so lets translate that too. >>>>>>> anyway, i made the machine save the program to a .csv file which it >>>>>>> named >>>>>>> new1.csv and then i copied it and inserted comments for us to discuss, >>>>>>> each >>>>>>> delineated by a # sign. Note that I do not expect the machine to >>>>>>> allow >>>>>>> comments in .csv files it's given, but i wanted to show where my >>>>>>> comments >>>>>>> were. >>>>>>> >>>>>>> I don't know what the upper-ASCII encoding is, but it's surely >>>>>>> chinese, >>>>>>> so >>>>>>> if >>>>>>> anyone can figure out how to convert and translate it that might help >>>>>>> us. >>>>>>> Also >>>>>>> the original manual is in Chinese in a .rar file, although there seems >>>>>>> to be >>>>>>> a >>>>>>> .PDF version of it in english, are they the same? >>>>>>> >>>>>>> anyway here's the files: >>>>>>> http://spaz.org/~jake/pix/pnp/ >>>>>>> >>>>>>> of course the next step is to add more steps to the program at the >>>>>>> machine, >>>>>>> and >>>>>>> tell it to make multiple boards, so that we can suss out what those >>>>>>> other >>>>>>> lines >>>>>>> are for. although to be honest i haven't read the manual yet and >>>>>>> maybe >>>>>>> it's >>>>>>> all explained in there. >>>>>>> >>>>>>> -jake >>>>>>> >>>>>>> >>>>>> >

8 years, 8 months

Re: [sudo-discuss] #5MoF?

by Jenny Ryan

Great idea, Charley! Sudo Mesh has been doing quarterly workshops and it's been really effective. Gives us time to plan a schedule and promote widely, and lotsa members show up and help with various facets of the event because we divvy up the work and people commit to specific roles (eg; A/V, chairs setup, welcome table, presentations, intro, food, promo/flyering, stickers/swag). I think 5moF facilitation has been hard because it seems like all the organizing work is pretty much on one begrudging volunteer each month. If we do switch to quarterly, might be wise to stagger them on different weeks than the mesh workshops, so that more sudoers who work on mesh can also help with 5mof. Next mesh workshop is September 23rd... so early Sep could work well. ^_^ On Jul 24, 2017 12:16 PM, "Charley Sheets" <rcsheets(a)acm.org> wrote: > On Mon, 24 Jul 2017 09:04:59 -0700 > robb <sf99er(a)gmail.com> wrote: > > > On Mon, Jul 24, 2017 at 6:29 AM, Marc Juul <juul(a)labitat.dk> wrote: > > > > > don't have time > > > > > > +1 > > maybe try again in sept. > > Should we space 5MoF out more? Maybe quarterly instead of monthly? > > I'm concerned that the more we announce and then cancel, the less > people will be inclined to participate. > > -- > Charley Sheets > > _______________________________________________ > sudo-discuss mailing list > sudo-discuss(a)lists.sudoroom.org > https://sudoroom.org/lists/listinfo/sudo-discuss > >

8 years, 8 months

Fwd [Mesh] Tuesday hacknight tomorrow in SF instead

by aaronco36＠sdf.org

Unsure if the Mailman again crashed, thus causing emails from the past week (including this one) to be sent later. But anyyyywaaaay, here goes.... Quoting Marc Juul <juul at labitat.dk>: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ They Mozilla/NSF WINS event is scheduled tomorrow on top of our normal meeting. More info on the challenge that this event is about here: https://wirelesschallenge.mozilla.org/ There will be a 40 minute panel which will include myself, and I believe Thu Nguyen (the founder of Flowzo), Ahsan Baig (Deputy CIO, City of Oakland) and Kalimah Priforce (CEO, Qeyno Labs). *When and where:* July 25, 6:30 - 8:30pm PT Mozilla Community Space, 2 Harrison St, San Francisco, CA 94105 *RSVP for the event here <https://goo.gl/forms/piPSVK40Y50yJXer1>* -- marc/juul ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Yes, that happened as planned. Robb and others of us at HHN watched and/or heard the live streaming of the Mozilla/NSF WINS event. You all can download and view the stream by visiting https://air.mozilla.org/nsf-wins-bay-area-meet-up/ , choosing the 'Download' tab, and then saving the download from one of the links in that tab as WebM (HD) or Mpeg4 (HD) -- -- I suggest renaming the download to something much more intelligible than the default webm.webm, hd_webm.webm, mp4.mp4 or hd_mp4.mp4. Mark 1st appears at 23 minutes ~49 seconds into the vid, taking his seat and carrying his bottled beverage, and he starts speaking at 24 minutes ~28 seconds. -A

8 years, 8 months

surface mount electronics donation

by Jake

personally i think we should accept those parts, but we've been getting rid of a lot of unnecessary stuff from sudoroom recently (well mostly not me doing it) so anything that we get from them that doesn't belong in sudoroom will get recycled if nobody else wants it. I will say that the last stuff we got from them seems to be pretty decently useful, most of it, so that's a good sign. I don't think we want the carousels though, they seem like the kind of thing you use in a factory where you have plenty of space and need random access fast, whereas we are only going to survive in sudoroom if we can store stuff densely and compensate by keeping good records of where stuff is parked. -jake On Wed, 26 Jul 2017, Patrik D'haeseleer wrote: > By the way - I may be able to get a bunch more surface mount components, > from the same lab from which I brought over several boxes full of spools > before. I assume we want those? > > BioCurious had originally called dibs on two giant 6ft tall 4-sided > carousels of electronic parts that included a bunch of trays with SMD > parts. But now they're just taking up space in their new lab, and they want > to shrink down a bit. We may even be able to get an entire parts carousel. > > Patrik > > > On Wed, Jul 26, 2017 at 1:46 AM, Jake <jake(a)spaz.org> wrote: > >> OK i renamed the repository to pos2charmhigh to match the true name >> so the new link is: >> >> https://github.com/sudoroom/pos2charmhigh/ >> >> Miloh was doing some work on the machine earlier tonight, but he's into >> using >> GEDA not KiCAD, but i'm sure his contributions will lift all boats. >> >> you can push to: >> git@github.com:sudoroom/pos2charmhigh.git >> >> thank you >> -jake >> >> On Tue, 25 Jul 2017, Morgan Allen wrote: >> >> there was a rational behind calling the repo pcb2... but... dunno >>> >>> Anyhow, pos2... is for the fact the KiCad outputs .pos (position) files. >>> >>> Feel free to collaborate where ever, hopefully no one forces you to sign >>> up >>> for GitHub. >>> >>> As for future updates, I can push where ever is most useful. >>> >>> ------------------------------------------------------------ >>> ------------------------------------------------------------ >>> -------------- >>> 2017 Hackaday Prize Entry >>> Any Colored Button <https://hackaday.io/project/19880-any-colored-button> >>> >>> Step 1. Press Button >>> Step 2. ***startupy hand waving*** >>> Step 3. Profit! >>> >>> Likes = Votes. Votes = $1s. $1s = Profits. >>> >>> Step 2 = Vote for Any Colored Button >>> <https://hackaday.io/project/19880-any-colored-button>. >>> >>> On Tue, Jul 25, 2017 at 11:26 PM, Jake <jake(a)spaz.org> wrote: >>> >>> Morgan, i am confused, what's the difference between pcb2charmhigh and >>>> pos2charmhigh? >>>> >>>> I have pcb2charmhigh which i got from github here: >>>> https://gitlab.com/morganrallen/pcb2charmhigh.git/ >>>> >>>> i can't find the source to pos2charmhigh because gitlab doesn't seem to >>>> allow >>>> me to view the source, if it's even there, without creating a login... >>>> which I >>>> don't want to do, partially because they're trying to force me to. >>>> >>>> Anyway, I forked pcb2charmhigh to a sudoroom repository here: >>>> https://github.com/sudoroom/pcb2charmhigh >>>> >>>> so that I and Miloh and others can collaborate on it. >>>> >>>> Will you be updating the pcb2charmhigh repo on gitlab? At least I can >>>> pull from there. >>>> >>>> thank you, >>>> -jake >>>> >>>> On Sun, 9 Apr 2017, Morgan Allen wrote: >>>> >>>> I worked on a thing today. >>>> >>>>> https://www.npmjs.com/package/pos2charmhigh >>>>> >>>>> (roughly) converts KiCAD .pos files to something that resembles the >>>>> Charmhigh CSV file. I haven't tested the output yet. >>>>> >>>>> Jake, when you did your first test run did you run into any issues with >>>>> negative X/Y coords? When I was trying to set a component local [ 0, 0 ] >>>>> was about 1.5" right of the actual components. I could jog it into place >>>>> once with no problem. Then I'd get an error about a negative position. I >>>>> might make it back later tonight to do some more testing. >>>>> >>>>> ------------------------------------------------------------ >>>>> ------------------------------------------------------------ >>>>> -------------- >>>>> 2017 Hackaday Prize Entry >>>>> Any Colored Button <https://hackaday.io/project/1 >>>>> 9880-any-colored-button> >>>>> >>>>> Step 1. Press Button >>>>> Step 2. ***startupy hand waving*** >>>>> Step 3. Profit! >>>>> >>>>> Likes = Votes. Votes = $1s. $1s = Profits. >>>>> >>>>> Step 2 = Vote for Any Colored Button >>>>> <https://hackaday.io/project/19880-any-colored-button>. >>>>> >>>>> >>>>> On Wed, Feb 15, 2017 at 3:24 PM, Jake <jake(a)spaz.org> wrote: >>>>> >>>>> the machine menu is entirely in english. >>>>> >>>>>> >>>>>> awesome job translating! >>>>>> >>>>>> >>>>>> On Wed, 15 Feb 2017, miloh wrote: >>>>>> >>>>>> are there english menu options? >>>>>> >>>>>> >>>>>>> used google translate to get some menu image translations in case >>>>>>> there aren't any. >>>>>>> >>>>>>> On Wed, Feb 15, 2017 at 2:42 PM, miloh <froggytoad(a)gmail.com> wrote: >>>>>>> >>>>>>> chrome browser reads the unicode chinese characters in your text file. >>>>>>> >>>>>>>> >>>>>>>> http://spaz.org/~jake/pix/pnp/placeonepart.txt >>>>>>>> >>>>>>>> google translate makes a lot of sense with these strings. >>>>>>>> the pinyin is useful for cafl speakers who dont read as much hanyu to >>>>>>>> sound out everything >>>>>>>> >>>>>>>> >>>>>>>> %,原点偏移,X,Y, >>>>>>>> %,Yuándiǎn piān yí,X,Y, >>>>>>>> %,origin offset,X,Y >>>>>>>> >>>>>>>> %,料栈偏移,料栈号,X,Y,进给量,注释 >>>>>>>> %, Liào zhàn piān yí, liào zhàn hào,X,Y, jìn jǐ liàng, zhùshì >>>>>>>> %, Material stack offset, material stack number, X, Y, feed, comment >>>>>>>> >>>>>>>> this might befor arrays. >>>>>>>> >>>>>>>> %,拼板1,X,Y, >>>>>>>> %, Pīn bǎn 1,X,Y, >>>>>>>> %, Puzzle 1, X, Y, >>>>>>>> >>>>>>>> you had me at 'puzzle' >>>>>>>> >>>>>>>> %,贴头号,料栈号,X,Y,角度,高度,跳过,速度,说明,注释 >>>>>>>> %, Tiē tóuhào, liào zhàn hào,X,Y, jiǎodù, gāodù, tiàoguò, sùdù, >>>>>>>> shuōmíng, zhùshì >>>>>>>> %, Sticker number, material number, X, Y, angle, height, skip, speed, >>>>>>>> description, comment >>>>>>>> >>>>>>>> good bits here >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Wed, Feb 15, 2017 at 2:29 PM, Jake <jake(a)spaz.org> wrote: >>>>>>>> >>>>>>>> last night i programmed the pick&place machine to place a capacitor >>>>>>>> >>>>>>>>> from >>>>>>>>> material slot 3 onto this board, rotating 90 degrees in the process, >>>>>>>>> and >>>>>>>>> placing it perfectly. >>>>>>>>> >>>>>>>>> here's the video: >>>>>>>>> https://www.youtube.com/watch?v=AuNQKG_SQ30 >>>>>>>>> >>>>>>>>> anyway, i made the machine save the program to a .csv file which it >>>>>>>>> named >>>>>>>>> new1.csv and then i copied it and inserted comments for us to >>>>>>>>> discuss, >>>>>>>>> each >>>>>>>>> delineated by a # sign. Note that I do not expect the machine to >>>>>>>>> allow >>>>>>>>> comments in .csv files it's given, but i wanted to show where my >>>>>>>>> comments >>>>>>>>> were. >>>>>>>>> >>>>>>>>> I don't know what the upper-ASCII encoding is, but it's surely >>>>>>>>> chinese, >>>>>>>>> so >>>>>>>>> if >>>>>>>>> anyone can figure out how to convert and translate it that might >>>>>>>>> help >>>>>>>>> us. >>>>>>>>> Also >>>>>>>>> the manual is in Chinese so lets translate that too. >>>>>>>>> anyway, i made the machine save the program to a .csv file which it >>>>>>>>> named >>>>>>>>> new1.csv and then i copied it and inserted comments for us to >>>>>>>>> discuss, >>>>>>>>> each >>>>>>>>> delineated by a # sign. Note that I do not expect the machine to >>>>>>>>> allow >>>>>>>>> comments in .csv files it's given, but i wanted to show where my >>>>>>>>> comments >>>>>>>>> were. >>>>>>>>> >>>>>>>>> I don't know what the upper-ASCII encoding is, but it's surely >>>>>>>>> chinese, >>>>>>>>> so >>>>>>>>> if >>>>>>>>> anyone can figure out how to convert and translate it that might >>>>>>>>> help >>>>>>>>> us. >>>>>>>>> Also >>>>>>>>> the original manual is in Chinese in a .rar file, although there >>>>>>>>> seems >>>>>>>>> to be >>>>>>>>> a >>>>>>>>> .PDF version of it in english, are they the same? >>>>>>>>> >>>>>>>>> anyway here's the files: >>>>>>>>> http://spaz.org/~jake/pix/pnp/ >>>>>>>>> >>>>>>>>> of course the next step is to add more steps to the program at the >>>>>>>>> machine, >>>>>>>>> and >>>>>>>>> tell it to make multiple boards, so that we can suss out what those >>>>>>>>> other >>>>>>>>> lines >>>>>>>>> are for. although to be honest i haven't read the manual yet and >>>>>>>>> maybe >>>>>>>>> it's >>>>>>>>> all explained in there. >>>>>>>>> >>>>>>>>> -jake >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >> _______________________________________________ >> sudo-discuss mailing list >> sudo-discuss(a)lists.sudoroom.org >> https://sudoroom.org/lists/listinfo/sudo-discuss >> >> >

8 years, 8 months

#5MoF?

by robb

Does anyone want to be MC for the next #5MoF <https://sudoroom.org/wiki/5MoF#Future_of_5MoFs>? The next one would be on Aug 2. Thx ~r

8 years, 8 months

Invoice 1161 from Omni Commons

by Omni Commons

Dear Sudo Room, Here's your invoice! We appreciate your prompt payment. Thank you for stewarding the commons. Love and solidarity, Omni Commons ------------------------ Pledge Summary -------------------------- Invoice # : 1161 Invoice Date: 08/01/2017 Due Date: 08/25/2017 Terms: Net 25 Amount Due: $2,000.00 The complete version has been provided as an attachment to this email. ---------------------------------------------------------------------

8 years, 9 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss