7 Aug
2013
7 Aug
'13
7:15 p.m.
OK didn't turn out perfect but I have some results to use in refining the model for
printability.
Thanks again, dan!
Aug 7, 2013 04:03:24 PM, somniac(a)me.com wrote:
I've done it! Here's the rundown:
Previously your host software was probably "Repetier-Host", which was a nice
little suite with the slicer and host software in one package. Now things are a little
different:
First you'll use KISSlicer to slice an .stl model into your .gcode file, then
you'll open PronterFace, where you can load that .gcode file and tell the printer to
print it. It's actually fairly similar, all the same general functions, just in two
pieces of software.
Good luck!
-Dan
On Aug 7, 2013, at 11:24 AM, Hol Gaskill hol(a)gaskill.com> wrote:
Hi Folks,
Who has used the 3D printer since the host computer was re-imaged or knows where to find
documentation on how to use it posted somewhere? I used the old one frequently but it was
in a windows environment, tried to show someone how to use it the other day and was
dumbfounded. Trying to print out some intake strainers to keep pumps from sucking in
duckweed.
Cheers,
Hol
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
http://lists.sudoroom.org/listinfo/sudo-discuss
