3 Aug
2023
3 Aug
'23
10:56 a.m.
What time is the meeting tonight? I might be interested in helping out with
this! I have only have some Arduino experience, but I'm generally good
around instrumentation
On Wed, Aug 2, 2023 at 12:04 PM Andrew R Gross via sudo-discuss <
sudo-discuss(a)sudoroom.org> wrote:
I have experience configuring Marlin, but I won't
be able to get to this
any sooner. Taylor, can I suggest that we tentatively plan to meet on
Wednesday, September 16th? That will give you some recovery time after the
Burn when we'll both be around, if you want the company.
Scott, you mentioned an interest in volunteering. We'd love for you to
volunteer! Are you available for a phone call, or to drop in to our meeting
tonight (W. August 2nd)? It's in person and online:
meet.waag.org/turtlesturtlesturtles
*Andrew R Gross, (he/him)*
412.657.5332 - shrad.org <http://www.shrad.org>
On Wed, Aug 2, 2023 at 2:31 AM Taylor Alexander via sudo-discuss <
sudo-discuss(a)sudoroom.org> wrote:
Here’s the controller it uses. There’s also a
raspberry pi 4 mounted
under this, as well as a touch screen.
On Tue, Aug 1, 2023 at 11:39 PM Taylor Alexander <tlalexander(a)gmail.com>
wrote:
_______________________________________________
sudo-discuss mailing list -- sudo-discuss(a)sudoroom.org
To unsubscribe send an email to sudo-discuss-leave(a)sudoroom.org
More options at
https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/
Welcome Scott!
I’ve started taking a look at the printer. It’s a super nice machine!
Way better than our other printers. I’m excited to help get it working!
Mechanically it looks like it’s in good shape. It needs updated
firmware. It has Marlin installed but the firmware is not configured for
Core-XY and the three auto bed leveling z axis steppers (very nice!) are
not hooked up to the control board. However there are cables for the
steppers with it in the box of parts and the control board has drivers and
plugs for the three other steppers.
So basically we need someone who can install the correct firmware for
this printer. The email below in the chain has info on the model of printer
but this has an additional z axis mod (which is very nice!) which will
require additional configuration. Options are marlin or klipper. I have
never configured klipper but it seems nice.
I’m doing the big push for burning man right now so I won’t be able to
look at this more till September. If someone else has any experience with
configuring 3D printer firmware it would be great for you to take this on!
On Wed, Jul 26, 2023 at 12:58 PM Jake via sudo-discuss <
sudo-discuss(a)sudoroom.org> wrote:
sudo-discuss mailing list
-- sudo-discuss(a)sudoroom.org
To unsubscribe send an email to sudo-discuss-leave(a)sudoroom.org
More options at
https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/
We got a really nice 3D printer donation from
someone I hope will start
coming
around and join us! Welcome Scott
-jake
---------- Forwarded message ----------
Date: Tue, 25 Jul 2023 21:39:31 -0700
From: Scott Griffitts
Subject: Re: [sudo-info] 3D printer donation
Hey, Dropped off the printer with Toby and met a few folks who were
excited,
skeptical, and questioning the printer. I figured I would share some
info on
it.
Here is the page on the upgraded Z mod I did:
https://seckit3dp.design/kit/triple-z
Here is the page for the main printer build:
https://github.com/SecKit/SK-Go_SK-Mini
Here is some info on the firmware it can run:
https://www.klipper3d.org/
(I think if you do some digging, you can find examples for the
kinematic bed)
Here is the bed probe I used:
https://coex3d.com/products/bltouch-v3-1-automatic-bed-leveling-probe
The stepper motor board used is big tree tech octopus v1.0 with TMC2209
drivers
If you have any other questions let me know :)
Also,
If you guys need volunteers or anything, let me know. I’d love to help
out with really cool people like you guys.
Regards
Scott Griffitts
On Sat, 22 Jul 2023, Scott Griffitts wrote:
> Hi,
> My name is Scott. I've been in the middle of
> upgrading a Seckit SK-GO² core-XY 3D printer. I'm
> about 90% done, but have lost interest in it. The
> machine has been an absolute workhorse with its
> large build volume, but I think it is time for Oppy
> (named after the rover) to move on to a new owner
> who can utilize and attend it properly. It needs
> about 3-5 hours of work to get it running, and maybe
> 3hrs of tuning. Worst case, it is loaded with
> aluminum extrusions, hardware, stepper motors,
> linear rails, and a Pi!
> Let me know if I can donate the printer to your
> space :)
> Regards,
> Scott Griffitts_______________________________________________
sudo-discuss mailing list -- sudo-discuss(a)sudoroom.org
To unsubscribe send an email to sudo-discuss-leave(a)sudoroom.org
More options at
https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/
_______________________________________________ 
