26 Mar
2022
26 Mar
'22
12:50 a.m.
We mainly need the edges of the panes to be scraped off so the glazier can
reseal the panes properly, which should eliminate a lot of the remaining
leakage. I believe the plan was also to take out the vent above the main
tables, which was letting in a ton of water.
We already did most of the scraping above CCL. In some places the coating
peels off the glass in long strips, which is quite satisfying. If not, it
can be softened up by soaking it with isopropanol for a couple minutes
first. On average, we took about two person-hours per skylight. If you need
any, there should be some metal paint scrapers in the top compartment of
the red toolbox in CCL - please return them when done.
Patrik
On Fri, Mar 25, 2022 at 5:25 PM Marc Juul via sudo-discuss <
sudo-discuss(a)sudoroom.org> wrote:
Hi sudoers!
We had an unfortunate incident with the new protective coating on our roof
where the roof windows got coated as well. It's some latex type substance
and CCL tells us it isn't too difficult to get off.
Is anyone up for helping with a couple of hours of scraping tomorrow
(Saturday) from 3 pm to 5 pm?
I'll bring scrapers and we'll lay down some 2x4s across the windows so
people be in danger of falling through the glass.
--
marc/juul
_______________________________________________
sudo-discuss mailing list -- sudo-discuss(a)sudoroom.org
To unsubscribe send an email to sudo-discuss-leave(a)sudoroom.org
More options at
https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/