if you start the raster scan mode too far to the left, the head will
overshoot the image and slam into the wall.
really stupid but that's just the way it is
- - - - Begin automatically generated footer - - - -
Web:
http://www.adammunich.com
Cell: +1-650-452-0554, M-F 10a - 8p PST
Note: To protect against computer viruses, e-mail programs may prevent
sending or receiving certain types of file attachments. Check your e-mail
security settings to determine how attachments are handled.
Confidentiality Notice: This electronic mail transmission is intended for
the use of the individual or entity to which it is addressed and may
contain confidential and/or proprietary information belonging to the
sender. If you are not the intended recipient, you are hereby notified that
any disclosure, use, copying, distribution, or the taking of any action in
reliance on the contents of this information is strictly prohibited. If you
have received this transmission in error, please notify the sender
immediately by e-mail and delete the original message. Thank you for your
cooperation.
On Mon, Feb 22, 2016 at 5:38 PM, Morgan Allen <morganrallen(a)gmail.com>
wrote:
Unless this is recent, it's been that way for a
while. Could be what's
causing rastering to work though but I cut last week without issue.
On Mon, Feb 22, 2016 at 5:15 PM, Jake <jake(a)spaz.org> wrote:
i think it will allow you to jog left even if the
switch is pressed. i
know it's dumb but i think it only looks at the switch when it is homing
itself. I could be wrong.
if not i can certainly bring a replacement but i'll have to see the old
one first. or check those plastic 3d printers from 3dsystems that are
kicking around.
-jake
On Mon, 22 Feb 2016, hol(a)gaskill.com wrote:
Hey Adam,
I was about to cut a stencil on the laser when I noticed the cut head wa
s bumping up against the left side and stalling the motor. I looked and
sure enough the steel leaf of the switch was twisted downward. I was a
ble to jog the head left while holding the limit switch down so I assume
the unit needs to be replaced. Do you know if there are any spares at
sudo? I have some from open source hardware that look similar but didn'
t want to attempt taking off the rail to get at it and making it worse.
Cheers,
Hol
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
--
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: OpenPGP.js v.1.20121007
Comment:
http://openpgpjs.org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=V/Ia
-----END PGP PUBLIC KEY BLOCK-----
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss