This is so RAD. Bravo. Sent from my Verizon Wireless 4G LTE smartphone -------- Original message -------- From: Jake Date:09/05/2014 10:50 PM (GMT-08:00) To: sudo-discuss(a)lists.sudoroom.org Cc: James Halliday Subject: [sudo-discuss] robot works! the robot finally works. Jenny got us a three-phase power converter and that's all it took! people have been steering it around using the training pendant all night. It makes a squealing noise while it's on. http:spaz.org/~jake/robot/pix http:spaz.org/~jake/robot/video/VID_20140905_214843.mp4 it has a serial port. we are going to need to RTFM a bit to learn how to actually control it, for example from a program on a real computer. it can move much faster than we are able to steer it with the control pendant. But for now it moves pretty slow, even on "fast" mode. here are all the PDFs i have found so far. I believe there is enough information in here to be able to communicate with the thing over the serial port. If you want any help actually connecting serial to it, please let me know. I would like to plug it into a serial port on the 3d printing computer, and then people will be able to talk to the robot from their laptop using socat or whatever program they run on that computer. Let me know if you're interested in doing that. But first read the manuals, and put whatever you find on the wiki page so the rest of us know where to start. http://spaz.org/~jake/robot/ -jake _______________________________________________ sudo-discuss mailing list sudo-discuss(a)lists.sudoroom.org https://lists.sudoroom.org/listinfo/sudo-discuss _______________________________________________ sudo-discuss mailing list sudo-discuss(a)lists.sudoroom.org https://lists.sudoroom.org/listinfo/sudo-discuss