i liked this jam
we started out doing a simple comics jam but then ended up 3d printing a
drawing that max klein made
http://www.thingiverse.com/thing:87506
*Romy Mimi Ilano*
*romy.ilano(a)gmail.com <romy.ilano(a)gmail.com>*
*http://www.romyilano.com <http://www.romyilano.com>*
+1 (415) 779-6237
skype: romy.ilano
Hellos,
We have physically connected two switches: HP and Cisco (I believe), via
CAT6 cable.
One switch is located at the Server Area and the other on the second floor
(which will be used to connect computers that can be used by the public in
general).
THE CALL:
The layer one part is done, but I feel that someone else with more
switching/routing knowledge than me should check this two switches for any
possible misconfiguration. I am not keen on this, but I could help someone
that can lead this part.
Please let me know if someone else already done this, so I can drop this
part and continue with the rest of things that need to be done on the
second floor.
Thanks in advance,
Daniel
On Sun, Jul 5, 2015 at 10:36 PM, danarauz(a)gmail.com <danarauz(a)gmail.com>
wrote:
> The two switches light up today (Sunday).
> One of the termination had to be redone.
>
>
>
>
>
> On Sat, Jul 4, 2015 at 9:59 PM, danarauz(a)gmail.com <danarauz(a)gmail.com>
> wrote:
>
>> Juul: Yes, I am excited that we are getting this done.
>>
>> Anyways, the good news: The HP switch is up on the column and its powered
>> up.
>>
>> The cable that comes from the building entrance's door was terminated and
>> its connected to the Switch in the second floor area. The cable that
>> connects to the Switch in the second floor area and the Server area was
>> also connected to the switch.
>>
>> Okay, the not so good news: The switches are not talking.
>>
>> Somewhere along the line wire no. 1 is broken or not connecting.
>> Wires 7 and 8 show issues also. I re-punched the end at the Patch Panel;
>> but this didn't help.
>> I will come back tomorrow, Sunday, and re-do the end at the second floor.
>> I hope that takes care of it.
>>
>> Daniel
>>
>>
>>
>> On Sat, Jul 4, 2015 at 7:49 PM, Marc Juul <juul(a)labitat.dk> wrote:
>>
>>>
>>>
>>> On Sat, Jul 4, 2015 at 3:43 PM, danarauz(a)gmail.com <danarauz(a)gmail.com>
>>> wrote:
>>>
>>>> Okay folks, the run from the second floor (where the public computers
>>>> area) to the server area has been done.
>>>> It took me a few hours, moving like molasses, but it is done! :)
>>>>
>>>> * One end has been terminated at the Server area patch panel port 32.
>>>> * The other end of the cable was terminated to a female RJ45 connector
>>>> (without a box, because I didn't find one).
>>>>
>>>
>>> Awesome! The installation is so close to completed now!
>>>
>>>
>>>> I WILL BE MOVING HP SWITCH UP THE WALL:
>>>> I noticed that a HP Procurve 24 port switch was left on top of one of
>>>> the desktop computers; but I will move it up to the column above this
>>>> table, so members and visitors don't mess with it. -Remember, this switch
>>>> is feeding a connection the door lock system and, I believe, also the
>>>> bookstore register area. And we really don't want those two connections to
>>>> lose connections, just because someone unplugged the wrong cable or
>>>> unplugged the wrong electrical cord or etc, etc.
>>>>
>>>
>>> Good idea, I had placed it there simply to indicate that that switch
>>> would be good to use for that area.
>>>
>>> --
>>> marc/juul
>>>
>>
>>
>>
>> --
>>
>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>> - - - - - - - - - - - - - -
>> Help open a people-powered common space in Oakland, California!
>> https://omnicommons.org/donate
>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>> - - - - - - - - - - - - - -
>>
>>
>>
>
>
> --
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - - - - - - - - - - - - -
> Help open a people-powered common space in Oakland, California!
> https://omnicommons.org/donate
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> - - - - - - - - - - - - -
>
>
>
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Okay folks, the run from the second floor (where the public computers area)
to the server area has been done.
It took me a few hours, moving like molasses, but it is done! :)
* One end has been terminated at the Server area patch panel port 32.
* The other end of the cable was terminated to a female RJ45 connector
(without a box, because I didn't find one).
I WILL BE MOVING HP SWITCH UP THE WALL:
I noticed that a HP Procurve 24 port switch was left on top of one of the
desktop computers; but I will move it up to the column above this table, so
members and visitors don't mess with it. -Remember, this switch is feeding
a connection the door lock system and, I believe, also the bookstore
register area. And we really don't want those two connections to lose
connections, just because someone unplugged the wrong cable or unplugged
the wrong electrical cord or etc, etc.
I will be updating the chart by the patch panel at the Server area to
reflect this new connection.
Thanks,
Daniel
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Hi.
I'm trying to write up an EAGLE board layout and failing miserably. I'm
using the freeware EAGLE suite for the mac. Dunno if that's making my life
harder than usual or not, but does anyone have recommendations for good
EAGLE tools and/or willing to help me figure out how to work this thing?
-Cere
--
Best Regards,
Cere Davis
ceremona(a)gmail.com
http://AcoustoCurio.us
-------------------
GPG Key: http://taffy.findpage.com/~cere/pubkey.asc
GPG fingerprint (ID# 73FCA9E6) : F5C7 627B ECBE C735 117B 2278 9A95 4C88
73FC A9E6
I am trying to run the network cable from th second floor to the server
area, but I got stuck.
I need a drill to make a hole (on one of the walls at the kitchen that
connect to CCL), but I cannot find a cordless drill.
Well, I also need the drill bit for that too.
Thanks,
Daniel
--
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -
Help open a people-powered common space in Oakland, California!
https://omnicommons.org/donate
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -