19 May
2016
19 May
'16
12:27 p.m.
You wont find an NIR blocking plastic curtain, unless it's black vinyl.
- - - - Begin automatically generated footer - - - -
Weblog: http://adammunich.com
Cell: +1-650-452-0554, M-F 10a - 8p PST
PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich
On Wed, May 18, 2016 at 11:41 PM, Patrik D'haeseleer <patrikd(a)gmail.com> wrote:
Cool! Do you have a model number on there somewhere?
I assume this will be an IR laser if it's a diode array. So if we get a
safety curtain, we'll need one that can block both UV from the plasma
cutter, and IR from the laser. Ditto for safety goggles. I assume that's
feasible, although likely a little harder than protecting against just one
of those.
Patrik
On Wed, May 11, 2016 at 1:58 PM, Jake <jake(a)spaz.org> wrote:
I forgot to include this link:
http://www.idacontrol.com/articles.php?nid=10
and a picture of the laser:
http://i.imgur.com/eXwf7Lo.jpg
I looked it up and to put out 75 watts of laser power, we should probably
feed in about 187 watts, or 2.5 times as much DC power in. That means we
need 112 watts of cooling with the liquid path.
we can put sonar sensors on the front of the laser so we can pre-focus it
by distance while preparing works to be cut.
-jake
On Wed, 11 May 2016, Jake wrote:
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
we got a giant laser for the robot. This will
allow it to cut things
precisely for us, even if they're really large.
of course to do this we'll have a safety interlock to prevent use by
untrained people, and we'll have a safety curtain or folding wall to deploy
around the robot while the laser is enabled, so nobody can accidentally see
the light coming from it.
I don't know the wavelength of the laser, but it's a giant laser diode
array with a lens on the end, and it has a water cooling jacket, and i think
i was told it's a 75 watt laser. we do have a way to power it.
if anyone wants to get involved with playing with this, please let me
know. I think we could get it to the point where it could cut through some
serious stuff, and the extremely large work area of the robot is a big deal.
-jake
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss