22 Feb
2016
22 Feb
'16
8:16 p.m.
Hi Alice,
I'm at sudoroom every tuesday evening starting at 7pm
you can learn how to use the robot then. If you want to use the laser
cutter, any time is fine but i'm not the one to show you how - maybe
Hol or Morgan can help with that, or someone else who knows how to use the
laser cutter.
-jake
On Mon, 22 Feb 2016, beehappysolutions wrote:
I’d like to learn how to cut a stencil or engrave with
the robot arm - are you doing this during weekday evenings or weekends? alice
On Feb 22, 2016, at 5:09 PM, hol(a)gaskill.com wrote:
Hey Adam,
I was about to cut a stencil on the laser when I noticed the cut head was bumping up
against the left side and stalling the motor. I looked and sure enough the steel leaf of
the switch was twis
ted downward. I was able to jog the head left while holding the limit switch down so I
assume the unit needs to be replaced. Do you know if there are any spares at sudo? I
have some from open
source hardware that look similar but didn't want to attempt taking off the rail to
get at it and making it worse.
Cheers,
Hol
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss