the door opener and makes the beeps, and watches the
battery voltage) was
slightly unplugged.
aw, no way! you mean on the cig adapter? we power cycled it twice to no
avail...guess we left it loose both times :/
On Mon, 5 Jun 2017, Patrik D'haeseleer wrote:
Any progress on fixing door access? I'm already hearing people talk about
> making a bunch more physical keys, which I think is a solution we really
> want to avoid...
>
> I know this is not a popular opinion around here, but I would still be in
> favor of adopting a commercial door access solution - possibly including a
> maintenance contract so we can get it fixed same day if something goes
> wrong.
>
> Patrik
>
> On Sun, Jun 4, 2017 at 9:47 PM, Julio Rios <julio.rios(a)gmail.com> wrote:
>
> I tried the same thing with Robb and still no go.
>>
>> On Sat, Jun 3, 2017, 14:47 danarauz(a)gmail.com <danarauz(a)gmail.com>
>> wrote:
>>
>> A quick note: there is a network cable that comes from the top of the
>>> ceiling above the door (as I recall its blue and its rolled up) that is
>>> not
>>> terminated but the other end it's plugged into the switch at the second
>>> floor.
>>>
>>> It you want, it can be used for the door, it seems more reliable and
>>> safer than the current network cable setup in use. The current setup
>>> goes
>>> to the floor and plugs into an small switch that often folks
>>> accidentally disconnect.
>>>
>>> Thx!
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Saturday, June 3, 2017, robb <sf99er(a)gmail.com> wrote:
>>>
>>> Still not working though
>>>> On Jun 3, 2017 2:07 PM, "robb" <sf99er(a)gmail.com> wrote:
>>>>
>>>> Unplug/plug usb cables from 12v cig adapter. Done
>>>>> On Jun 3, 2017 1:51 PM, "Jake" <jake(a)spaz.org>
wrote:
>>>>>
>>>>> in order to get the system to work, you really need to do a power
>>>>>> cycle of the
>>>>>> whole system. If you don't do it exactly this way, it
won't work,
>>>>>> even back
>>>>>> when the system was fine:
>>>>>>
>>>>>> open the big cabinet door with the battery and beaglebone and
voip
>>>>>> box
>>>>>> in it,
>>>>>> locate the two-USB power socket (a car cigarette lighter USB
charge
>>>>>> socket
>>>>>> wired to the battery) and you'll see that it has TWO USB-A
plugs in
>>>>>> it.
>>>>>>
>>>>>> unplug BOTH USB-A cables from the round USB socket thing, wait
at
>>>>>> least ten
>>>>>> seconds, and then plug them both back in. One powers the
beaglebone,
>>>>>> the other
>>>>>> powers the powered USB hub.
>>>>>>
>>>>>> If you don't do it this way, the card reader and beaglebone
won't
>>>>>> talk
>>>>>> to each
>>>>>> other :(
>>>>>>
>>>>>> and that's assuming that everything is fine hardware-wise.
>>>>>>
>>>>>> -jake
>>>>>>
>>>>>> On Sat, 3 Jun 2017, robb wrote:
>>>>>>
>>>>>> New reader installed. Green light blinks after reading card but
lock
>>>>>>
>>>>>>> not
>>>>>>> responding
>>>>>>> On Jun 3, 2017 12:07 PM, "Charley Sheets"
<rcsheets(a)acm.org> wrote:
>>>>>>>
>>>>>>> On Thu, 1 Jun 2017 19:23:21 -0700 (PDT)
>>>>>>>
>>>>>>>> Jake <jake(a)spaz.org> wrote:
>>>>>>>>
>>>>>>>> thanks Charley!
>>>>>>>>
>>>>>>>>>
>>>>>>>>> we have a few readers but there seems to be some
problem that
>>>>>>>>> might
>>>>>>>>> not be the reader. i'll take a look and let you
know!
>>>>>>>>>
>>>>>>>>>
>>>>>>>> It's mainly the card reader and a beaglebone or
something, right?
>>>>>>>>
>>>>>>>> --
>>>>>>>> Charley Sheets
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> sudo-discuss mailing list
>>>>>>>> sudo-discuss(a)lists.sudoroom.org
>>>>>>>>
https://sudoroom.org/lists/listinfo/sudo-discuss
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>> --
>>> Daniel
>>>
>>> Signal: 415.336.9143 <https://whispersystems.org/>
>>>
>>> WhatsApp: 415.336.9143 <https://www.whatsapp.com/download/>
>>>
>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>> - - - - - - - - - - - - - -
>>> Help open a people-powered common space in Oakland, California!
>>>
https://omnicommons.org/donate
>>> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
>>> - - - - - - - - - - - - - -
>>>
>>>
>>>
>>> _______________________________________________
>>> discuss mailing list
>>> discuss(a)lists.omnicommons.org
>>>
https://omnicommons.org/lists/listinfo/discuss
>>>
>>>
>> _______________________________________________
>> discuss mailing list
>> discuss(a)lists.omnicommons.org
>>
https://omnicommons.org/lists/listinfo/discuss
>>
>>
>>
>