Hey folks! I, Dusty, and Anka have been putting in some time with the door to SUDO and CCL. We have reached a point were it is important to get information/input from you...as we can't proceed with this project without it. *The basic needs for this door:* - The door needs to sweep/open outward, toward the main exits of the building. As such it needs to be "hanged" in a way opposite of it's current (now former) position. - There needs to be a "panic bar" installed along with a nice "door closer". We have the door closer and a panic bar. The panic bar as selected by Marc (who knows more about this stuff than Anka and myself). *Needed from SUDO/CCL folks:* - In order to re-hang this door, we need to figure out how the panic bar will work with the existing door frame. - We need to have folks from SUDO relay information about, or instal (preferred), a panic bar system that will work with whatever electronic entrance mechanism you will want for your space. A note on Labor: Anka and myself, Dusty, are working with doors throughout the building. We are learning as we go and I feel that it's much slower than I anticipated. Each door in this place is different and most are quite wonky. I will be out of town for the month of July...and subsequently unable to work on this project until my return in August. We want you to have a great door for your space, and we want it to be exactly what you want. :). Can SUDO folks take this issue to a meeting and have it discussed (if appropriate)? Thanks! Dusty