31 May
2015
31 May
'15
12:59 a.m.
someone "cleaned" the 3d printer table and now the guitar string that we
use to clear up clogs in the nozzle is missing.
don't clean up something if you don't know how to use it! i'd rather have
a functional 3d printer or soldering setup than a clean, useless table.
i fixed the motor drivers on the type A machine 3d printer, now we just
need another guitar string to clean the nozzle and we're back in business.
-jake
31 May
31 May
12:17 p.m.
i might have a spare, what dia?
On 2015-05-31 00:59, Jake wrote:
someone "cleaned" the 3d printer table and
now the guitar string that
we use to clear up clogs in the nozzle is missing.
don't clean up something if you don't know how to use it! i'd rather
have a functional 3d printer or soldering setup than a clean, useless
table.
i fixed the motor drivers on the type A machine 3d printer, now we
just need another guitar string to clean the nozzle and we're back in
business.
-jake
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
4:35 p.m.
the nozzle is .035mm so anything smaller than that
On Sun, 31 May 2015, hol(a)gaskill.com wrote:
i might have a spare, what dia?
On 2015-05-31 00:59, Jake wrote:
someone "cleaned" the 3d printer table
and now the guitar string that
we use to clear up clogs in the nozzle is missing.
don't clean up something if you don't know how to use it! i'd rather
have a functional 3d printer or soldering setup than a clean, useless
table.
i fixed the motor drivers on the type A machine 3d printer, now we
just need another guitar string to clean the nozzle and we're back in
business.
-jake
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
10:12 p.m.
On Sun, May 31, 2015 at 12:59 AM, Jake <jake(a)spaz.org> wrote:
someone "cleaned" the 3d printer table and
now the guitar string that we
use to clear up clogs in the nozzle is missing.
don't clean up something if you don't know how to use it!
I disagree. If we were to not clean things up that we don't understand then
most people would be very limited in what they can clean. This is not
viable and I suspect that very few people are comfortable operating in as
high a level of disorganization as you. I would say that the level of
messiness in sudo room is the primary turn-off for myself when it comes to
working there, even before "people will distract me from my work" which is
mostly solvable with headphones.
It is super frustrating when people move/trash useful stuff. This has
definitely happened to me. The solution is to not leave anything unlabeled
in the space that you care about. Either label the thing or put it in a
container and label the container. Short pieces of guitar string is
especially in need of labeling since it resembles trash to most people. The
label should be clear enough that people will know what to do. E.g: Guitar
string could be labeled as "3D printer head cleaner". Back in old sudo room
I had labeled the guitar string by putting a piece of blue painter's tape
around it and writing on it.
Tools that are obvious to everyone as being useful and not up for hacking,
like screwdrivers, should be labeled with just "sudo room". Bigger things
should use labitrack.
It would also really help if we establish a proper "aging shelf" where
stuff is put on one shelf and then moved down every day or two until it
reaches the bottom and is then thrown out. I think ideally we'd have at
least one week of aging before something unlabeled is thrown out. I will
try to set this up next time I am at sudo. This would also serve well as a
lost and found, where the last shelf can be thought of as a free pile.
i'd rather have a functional 3d printer or
soldering setup than a clean,
useless table.
We want a clean table AND a functional 3D printer.
i fixed the motor drivers on the type A machine 3d
printer, now we just
need another guitar string to clean the nozzle and we're back in business.
Nice! Great to have the Type A back in action :D
--
marc/juul
1 Jun
1 Jun
12:46 a.m.
+1 to having everything that is for a particular use be marked and put into
a storage container.
The level of messiness in sudo room is also a primary turn off for myself
when it comes to working there.
On Sun, May 31, 2015 at 10:12 PM, Marc Juul <juul(a)labitat.dk> wrote:
On Sun, May 31, 2015 at 12:59 AM, Jake <jake(a)spaz.org> wrote:
--
Karissa McKelvey
karissamck.com
Dat dat-data.com
U.S Open Data usopendata.org
Debt Collective debtcollective.org
Taskforce taskforce.is
Brass Liberation Orchestra brassliberation.org
someone "cleaned" the 3d printer table
and now the guitar string that we
use to clear up clogs in the nozzle is missing.
don't clean up something if you don't know how to use it!
I disagree. If we were to not clean things up that we don't understand
then most people would be very limited in what they can clean. This is not
viable and I suspect that very few people are comfortable operating in as
high a level of disorganization as you. I would say that the level of
messiness in sudo room is the primary turn-off for myself when it comes to
working there, even before "people will distract me from my work" which is
mostly solvable with headphones.
It is super frustrating when people move/trash useful stuff. This has
definitely happened to me. The solution is to not leave anything unlabeled
in the space that you care about. Either label the thing or put it in a
container and label the container. Short pieces of guitar string is
especially in need of labeling since it resembles trash to most people. The
label should be clear enough that people will know what to do. E.g: Guitar
string could be labeled as "3D printer head cleaner". Back in old sudo room
I had labeled the guitar string by putting a piece of blue painter's tape
around it and writing on it.
Tools that are obvious to everyone as being useful and not up for hacking,
like screwdrivers, should be labeled with just "sudo room". Bigger things
should use labitrack.
It would also really help if we establish a proper "aging shelf" where
stuff is put on one shelf and then moved down every day or two until it
reaches the bottom and is then thrown out. I think ideally we'd have at
least one week of aging before something unlabeled is thrown out. I will
try to set this up next time I am at sudo. This would also serve well as a
lost and found, where the last shelf can be thought of as a free pile.
i'd rather have a functional 3d printer or
soldering setup than a clean,
useless table.
We want a clean table AND a functional 3D printer.
i fixed the motor drivers on the type A machine
3d printer, now we just
need another guitar string to clean the nozzle and we're back in business.
Nice! Great to have the Type A back in action :D
--
marc/juul
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
3491
days inactive
3492
days old
4 comments
4 participants
participants (4)
-
hol＠gaskill.com -
Jake -
Karissa McKelvey -
Marc Juul