- sudo-discuss - sudoroom.org

by Marc Juul

Thanks to Will we now have a backup connection active! The ISP service person could not solve the problem and will come back tomorrow to continue his attempt. -- marc/juul

9 years

1
0
0 0

"4 Machines for free" - Craigslist.

by Steve Leach

https://sfbay.craigslist.org/eby/zip/6102037113.html Bullard Vertical Turret Lathe, Maho MH 800 T, Pratt & Whitney Lathe, and Devlieg Jig Mill

9 years

4
3
0 0

Internet still down

by Marc Juul

We spent some time troubleshooting today and we had to conclude that the problem is not with any of our gear or wiring. Either the new modem is also not working or the wiring is messed up outside of Omni (possibly the fault of the construction across the street) or the equipment at AT&T / LMI (our ISP) is messed up. This will likely take days to fix so we are trying to arrange for a backup internet connection tomorrow. We will likely have some form of internet tomorrow evening. Technical details: The new modem lit up one of its two DSL connection lights, meaning that one of the two phone lines connected. It then lit up its Internet light which I believe means that it has an IP layer link to something at the other end. Connecting directly to the modem gives an IP via DHCP and I can ping the modem, but trying to reach the outside world fails. traceroute fails with the statically assigned external IP of the modem (which is stored in the modem's flash memory). LMI did not give us the admin password to the modem (grrr) and don't have 24/7 support. We attempted a factory reset, which reset _something_ since it lost memory of its external IP and the Internet light stopped coming on, but did not reset the admin password to the factory default (at least as specified in the manual). After an attempted factory reset again only one of the DSL lights came on. We then went to the box where the phone lines come into our building (in the phat beats room) and tied in a new, short, connection directly to the box and connected the modem. Again the same behaviour: Only the DSL1 line lit up. As I write this email I'm realizing that since I didn't disconnect the existing phone cables running from the phone-line connection box in the phat beats room and to the server room, if that cable has been half-chewed over by critters then it might be creating a short which wouldn't be remedied by simply adding a new connection on top :/ I'll do another test where I untie the existing connection first. Assuming it still fails I will call our ISP tomorrow. Will from the mesh group should have an unlimited 4G modem waiting for him in his PO box which he will lend to Omni after he comes home from work tomorrow and we will hook it up so we can have some amount of internet until it's all sorted out. -- marc/juul

9 years

3
2
0 0

internet down

by Yardena Cohen

I can't physically be there but seeing complains that the internet is down at Omni. I can't remotely access any machines there. Is anybody able to go check? Thanks.

9 years

4
4
0 0

Fwd: [omni-consensus] GCEA proposal

by Jenny Ryan

Hey sudo, Up for omni consensus, a proposal to lock the Classroom (the room between the entrance hall and the ballroom along shattuck) up for consenso at the next delegates meeting on May 3rd. I am wary to say yes as GCEA is currently 5 months behind on rent ($250/mo) and part of the rationale was that "every other collective has locked rooms". Also, i have not seen any attempt made to store project items in a locked cabinet, and the group was effectively not present in the building from January through March. Finally, Global Womens Strike and Chiapas Support Committee, who have been members much longer, would like a room of their own and have never been late on rent ($564 and $200, respectively) or gone inactive from delegates meetings. This is the proposal and those are my thoughts. Plz discuss. ---------- Forwarded message ---------- From: "Laura Turiano" <scylla(a)riseup.net> Date: Apr 20, 2017 4:27 PM Subject: [omni-consensus] GCEA proposal To: "consensus(a)lists.omnicommons.org" <consensus(a)lists.omnicommons.org> Cc: Proposal from GCEA for 4/20/17: > > We are in the process of renegotiating our lease. One of our concerns is > that the room we have been using (the classroom behind the children’s > room) is not secure. We agreed to try using the room without a lock, but > multiple items have been stolen including activity folders with personal > information, chargers, books, art supplies and a stapler. We intend to > use the room to hold documents, a laptop, projectors, children activity > folders and other valuables. > > Our proposal is to add a lock with a code to the doors to the room. > Anyone who wants to use the room when it is free can get the code from > us. We have discussed this with BAPS and they are in agreement with this > arrangement. > > We appreciate your attention to this request. > > Thank you in advance. > > Best Regards, > > Almaz > > > > _______________________________________________ > consensus mailing list > consensus(a)lists.omnicommons.org > https://omnicommons.org/lists/listinfo/consensus >

9 years

3
2
0 0

Greetings earthlings! SudoRoom Meeting wednesday - wanna do an animation Jam?

by Romy Ilano

Hey Cere, everyone - I'm happily back from Budapest. Saw some great stuff there, didn't realize that it's where Tesla started his career as an electrical engineer after a series of fleeing gambling debts and dropping out of school. =D I've been messing around with various (non open source) animation programs. It would be cool to do a jam around a cartoon for SudoRoom and/or Count Culture Labs. https://www.youtube.com/watch?v=kHg_PLGXUC0 I have Moho Pro /Anime Studio and MotionArtist, which spits out HTML5 clickable comics. If anyone is interested it'd be cool. It'd also be cool tot hook any of these animation projects into some kind of hardware display, nam jun paik or bill viola style: http://asiasociety.org/blog/asia/flashback-story-behind-nam-june-paiks-digi… ============================= Romy Ilano romy(a)snowyla.com

9 years

1
0
0 0

Free -80 C lab freezer (if you move some stuff)

by Marc Juul

Counter Culture Labs has a free full size -80 freezer available. It is actually an older -86 C freezer but it now "only" comes down to -80 C. It's working but it should really have a new air filter installed before being put to use (nothing special, just to prevent dust getting into the compressor). We're getting a slightly newer model. What we need in return is for you to pick up our new freezer at a lab at UC Berkeley, bring it to Counter Culture Labs in Oakland, and then of course pick up our old freezer for your own use. The freezer you'd be getting measures: H: 200 cm W: 110 cm (includes handle) D: 94 cm The one you'd be moving for us is almost the exact same dimensions. Be aware that these are _very_ heavy. They cannot be allowed to lie down at any point (they will break). Tilting them up to 30 degrees is ok, but that's it. You'll probably want a forklift or a bunch of strong folk and some hefty ropes. If you want this freezer we need a firm commitment by late Sunday evening. -- marc/juul

9 years

1
0
0 0

Interwebs still down

by robb

It been almost 24 hours since we've been able to connect. Rebooting router does nothing

9 years

4
5
0 0

Do we want this cart?

by Patrik D'haeseleer

Let me know asap...

9 years

2
1
0 0

Joining the Electronic Frontier Alliance

by Karissa McKelvey

Are sudoers interested in doing this? Noisebridge has joined. Seems pretty easy to do. https://www.eff.org/electronic-frontier-alliance -- Karissa McKelvey http://karissa.github.io

9 years

2
1
0 0

Will not be a js night Thursday

by Lesley Bell

Hello all, I will not be at javascript night this Thursday. If anyone else has any interest in doing different languages, technologies, or talks on Thursdays, I'm very open to discussing that as well. Message me if you have questions/talk suggestions for other Thursdays. L

9 years

1
0
0 0

Thems thar gold in those AC conditioners

by Cere Davis

Compressors (maybe even functional) Sitting across from Bart station on 40th st. --- emailing from a cell @ceremona http://CereDavis.com

9 years

1
0
0 0

Help - Please vote for my Storyboard concept

by Eric Maundu

I got shortlisted as a finalist for an Infymakers Award and would like your help voting for my Storyboard concept This grant would help me run a Storyboard production test. Here is the project summary and voting page http://review.wizehive.com/voting/view/infypublic2017/47311/4492369/0 Storyboards are an extension of my journey ... Here is some more information https://kijanigrows.com/1982-2/ Thank you so very much in advance, -Maundu

9 years

1
0
0 0

Fwd: [sudo-info] Photoshoot location

by danarauz＠gmail.com

FYI ---------- Forwarded message ---------- From: Roxanna Meta <roxannameta(a)gmail.com> Date: Tue, Apr 11, 2017 at 11:40 AM Subject: [sudo-info] Photoshoot location To: info(a)sudoroom.org Hi there! I'm a cosplayer scouting around for a photoshoot location, and the folks at Maker Media referred me to y'all. I was wondering if that might be workable at Sudo Room. The costume is Holtzmann from Ghostbusters 2016, which begs a hacker/workbench-type setting! My photographer friend and I are super respectful of the work y'all do and wouldn't want to disturb anybody in the space, so we could do a late night or early morning. We'd absolutely leave things as we found them/clean up after ourselves, and I would also be happy to donate some monies to the cause. If there's anyone in particular I should talk to or a next step to take, please let me know! If it's not doable, totally understand and thank you for your time. Cheers! P.S. This'a me: https://www.instagram.com/p/BRfhqnQlqA4/?taken-by= roxannameta -- http://hausofm.storenvy.com http://www.facebook.com/HausofMeta <http://www.facebook.com/pages/Haus-of-Meta-Roxanna-Meta/180974231950661> http://www.twitter.com/RoxannaMeta <http://www.twitter.com/roxannameta> _______________________________________________ Info mailing list Info(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/info -- Daniel Signal: 415.336.9143 <https://whispersystems.org/> WhatsApp: 415.336.9143 <https://www.whatsapp.com/download/> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

9 years

3
5
0 0

payphone upgrades

by Jake

as you may have noticed, the payphone outside omni has been vandalized. the handset is broken. also, it does not make phone calls and the voice menu doesn't tell you anything. cel and I are changing that. we are going to add the ability to dial out to phone numbers in the USA for free. (no incoming calls though) and also add a proper voice prompt menu listing the collectives in Omni so that people can actually use the phone to call in. later we will add the ability for people answering the phone inside the omni to press a button to buzz the door open when someone calls them, and we'll add more phones to places besides just sudoroom and CCL. I believe part of the reason that the payphone was vandalized is because people wanted to make calls and the phone didn't work, so they smashed it. Who knows. Anyway i don't think Omni should shy away from the opportunity to provide something useful like that, seeing as we've already installed a payphone. -jake

9 years

5
6
0 0

grey omni commons battery

by robb

there was a smallish grey 12v volt battery that was clearly labeled omni productions that was in sudo. anyone (jake) know where it went/is?

9 years

1
1
0 0

Fwd: OMNI CLEANING DAY

by Jenny Ryan

---------- Forwarded message ---------- From: "almaz Y" <ahana75(a)gmail.com> Date: Apr 7, 2017 7:02 PM Subject: OMNI CLEANING DAY To: <booking(a)lists.omnicommons.org>, "Laura Turiano" <scylla(a)riseup.net>, "Jenny Ryan" <tunabananas(a)gmail.com>, "joseph liesner" <blue393(a)lmi.net>, < patrikd(a)gmail.com>, <lifenowreborn(a)gmail.com>, < consensus(a)lists.omnicommons.org> Cc: Good Afternoon Omni Collective Members My self, Lynn and Laura are planing Omni Cleaning Day, starting April 11, 2017 5:30 pm. This is going to be ongoing process once a month. All Collective Members are welcome to join the Omni Cleaning force to clean indoor and outdoor surrounding areas. The main objective of this activity is to promote the habits of cleanness and organize nature among the Omni Collectives and Volunteers; which would lead to more convenient and better working atmosphere and welcoming environment. Please share this with all the Omni working group b/c I don't have the email list for all the working group. Thank you, -- Almaz Yihdego, MPA www.globalcommunicationservices.org

9 years

1
0
0 0

Sheet metal bender

by Patrik D'haeseleer

9 years

3
4
0 0

Free 30" metal break?

by Patrik D'haeseleer

There's a 30" sheet metal bender at BioCurious that they'd be willing to part with. Do we want it? Please answer asap if interested! Patrik

9 years

1
0
0 0

Want to work full-time to stop Trump? Quit your job, join an A-Team, and get $15, 000 in seed funding

by Patrik D'haeseleer

http://boingboing.net/2017/04/07/the-band-the-band-the-band.html Holmes from Fight for the Future writes, "Fight for the Future, notable for helping beat SOPA & PIPA and win net neutrality rules in the US, is now offering seed funding for new creative, online/offline activism teams (what we're calling 'A-'eams"). We'll fund US teams in any major political issue area, or international teams in the Internet freedom space." Want to do activism full-time? Already are? Apply! <https://fightforthefuture.org/ateams> Let’s say you suddenly became terrified for the world’s future. What would you do? You can call Congress, or attend a protest. And you should. But is that it? Why stop there? Why set aside everything you’ve learned, everything you are, to be simply one more terrified person on a phone line, or marching in a street? What if you did the following, as well? 1. Find someone you love to work with. 2. Pick an issue area and angle. 3. Do activism full-time using every connection, skill, tool, and trick at your disposal—until you win. Our goal: to convince you to take exactly these steps, give you a playbook, and fund you. Terrified about Trump? Quit your job, start an A-Team. We'll fund it. Read this. <https://www.fightforthefuture.org/ateams/>[Fight for the Future] Patrik

9 years

1
0
0 0

script to set cpu governor

by robb

while playing around with some cpu intensive programs like blender, ardour, obs-studio, etc, i learned things run better when your cpu governor is set to "performance" so i wrote a simple shell script to handle setting the governor https://github.com/muxlux/setgov.sh it's no masterpiece but it works so far

9 years

3
3
0 0

5 minutes of fame live stream active now

by Marc Juul

Please help post on social media: https://www.youtube.com/watch?v=AyYlooIwW3Q

9 years, 1 month

1
0
0 0

sudo room 5 minutes of fame: Call for presentations!

by Marc Juul

YOU should present at the next sudo room 5 minutes of fame! It is in one week (April 5th at 7 pm). It doesn't take much to show and tell what you've been working on / learning for five minutes. You don't even need slides! Just bring yourself and talk. Either reply to me with your presentation title or edit the wiki: https://sudoroom.org/wiki/5MoF -- marc/juul

9 years, 1 month

5
9
0 0

What currently works with OpenWrt?

by Valent Turkovic

Hi, has anyone used latest revisions of Ubuiquiti M5 Loco and TP-LINK CPE510 devices and do they still work with OpenWrt? Cheers, Valent.

9 years, 1 month

1
0
0 0

Fwd: [sudo-info] A Small Favor from SFCircuits.

by Jenny Ryan

forwarding this from info(a)sudoroom.org if anyone is up to interface! ---------- Forwarded message ---------- From: Victor B. <victor(a)sfcircuits.com> Date: Tue, Apr 4, 2017 at 11:47 AM Subject: [sudo-info] A Small Favor from SFCircuits. To: info(a)sudoroom.org Hello, I'm writing from San Francisco Circuits. We're in San Mateo. Yes, the name is misleading but rent is high. We're a PCB fab & assembly provider. I came across your wiki and wanted to see if you'd be willing to list us on there for your members as well? We definitely fit in the 'For when it's not your money' section. Here's our website if we're a good fit! https://www.sfcircuits.com and our assembly page: https://www.sfcircuits.com/pcb-production-capabilities/pcb-assembly <https://www.sfcircuits.com/pcb-production-capabilities/pcb-assembly> You may also like our PCB design software comparison article. It's been pretty popular the last few months: https://www.sfcircuits.com/pcb-school/pcb-design-software-comparison-guide Thanks, Victor Bilandzic Web Manager, San Francisco Circuits, Inc. www.sfcircuits.com https://plus.google.com/+SFCircuitsInc www.twitter.com/sfcircuits --- San Francisco Circuits - Bridging Concepts with Reality _______________________________________________ Info mailing list Info(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/info

9 years, 1 month

3
2
0 0

SudoRoom Animation Club

by Romy Ilano

Hey folks, I just got some manga and animation software and wanted to do some fun animation projects (nothing serious yet) alongside my Bento Rock healthy eating project. I think i showed this a while ago, but this was made with another free tool: https://www.flickr.com/photos/miromi/33765653416/in/dateposted/ Is anyone else interested? It might be fun to do some nice exercises during meetings or weekends at SudoRoom! ============================= Romy Ilano romy(a)snowyla.com

9 years, 1 month

3
5
0 0

seeking free high-res LCD or IPS monitor

by Jake

anyone have an unwanted, working desktop monitor with at least 1920x1080 pixels? no TVs please, something sized as a desktop monitor. higher resolution is better :) thank you -jake

9 years, 1 month

1
0
0 0

Hackerspaces in Ukraine (Kiev and Odessa)

by Romy Ilano

Unfortunately I'm probably going to miss the next SudoRoom Five Minutes of Fame next Wednesday. I hope to see the videos from far away. I'm probably hitting Odessa and Kiev in the Ukraine next week. Has anyone from SudoRoom been there or are there any interesting hacker spaces there? ============================= Romy Ilano romy(a)snowyla.com

9 years, 1 month

2
2
0 0

EFF forum on phone encryption Tuesday at SF Library

by Ed Biow

https://occupyoakland.org/event/community-security-training-series/?instanc… Encryption Apps for your Phone: An Intermediate Workshop <https://www.eff.org/event/encryption-apps-your-phone-intermediate-workshop> Tuesday, April 4, 2017 6:00 pm to 7:30 pm Also, folksinger David Rovics is doing a show tonight at the Backroom in Berkeley, if anyone is interested: https://occupyoakland.org/event/david-rovics-punk-baroque-world-tour-concer… April 2, 2017 @ 8:00 pm – 9:30 pm Where: The Backroom 1984 Bonita Ave Writing of 1984, there is a showing of the film at the Elmwood Theater Tuesday, April 4 at 7PM. https://occupyoakland.org/event/film-showing-1984/?instance_id=305193 And writing about great movies, there is a showing of my favorite movie of all time, Dr. Strangelove, Or: How I Learned To Stop Worrying & Love The Bomb at 8PM on April 14th two Fridays from now at the splendid Paramount Theater in Oakland. Their movie series is relatively reasonable, only $5, and more fun than a barrel full of Mandrill baboons. http://www.paramounttheatre.com/schedule.html -Fluoridation is the most monstrously conceived and dangerous communist plot we have ever had to face. General Jack D. Ripper: -- +++++++++++++++++++++++++++++++++++++++++++ If God is watching us the least we can do is be entertaining. Unfortunately it is also probably the most we can do. Edmund Joseph Biow 328 Haddon Road Oakland, California 94606 (510) 763-0591 (try first, messages checked in morning, dumb phone, no caller ID, leave number) (415) 623-6473 (cell) EMAIL: biow(a)sonic.net - biow(a)riseup.net - biow(a)sonic.net - ejbiow(a)gmail.com - ebiow(a)yasashi.net IM: ejbiow(a)gmail.com To subscribe or unsubscribe to the lists I moderate send an email to the following: Subscribe: occupyoakland-subscribe(a)lists.riseup.net occupyoaklanddiscuss-subscribe(a)lists.riseup.net oaklandprivacyworkinggroup-subscribe(a)lists.riseup.net oaklandpublicbank-subscribe(a)lists.riseup.net occupyoaklandkitchen-subscribe(a)lists.riseup.net oaklandlivablewagediscussion-subscribe(a)lists.riseup.net Unsubscribe: occupyoakland-unsubscribe(a)lists.riseup.net occupyoaklanddiscuss-unsubscribe(a)lists.riseup.net oaklandprivacyworkinggroup-unsubscribe(a)lists.riseup.net oaklandpublicbank-unsubscribe(a)lists.riseup.net occupyoaklandkitchen-unsubscribe(a)lists.riseup.net oaklandlivablewagediscussion-unsubscribe(a)lists.riseup.net (\__/) .~ ~. )) /O O ./ .' {O__, \ { / . . ) \ |-| '-' \ } )) Warning squirrels: .( _( )_.' Einstein is on the prowl. '---.~_ _ _& You can use a PGP key to encrypt and secure our messages. To start using it, you'll need to install an OpenPGP software on your computer. Below you'll find a list of possible solutions for your operating system: Windows: Kleopatra (http://gpg4win.de/download.html)Linux: GnuPG (https://www.gnupg.org/download/supported_systems.html) OS X: GPG Keychain (https://gpgtools.org/#gpgsuite) Linux: GnuPG (https://www.gnupg.org/related_software/frontends.html) Android: OpenKeychain (https://play.google.com/store/apps/details?id=org.sufficientlysecure.keycha…) iOS: iPGMail (https://itunes.apple.com/us/app/ipgmail/id430780873?mt=8) Once you set up PGP on your computer please import my public key into your local OpenPGP Key-Manager. The valid PGP keys for my biow(a)cubasoldarity.net & biow(a)riseup.net accounts can be downloaded here: http://ebiow.yasashi.net/pgp/ An "easy" way to set up PGP on your computer is to download the free & open sources Thunderbird email client (available on Linux, Windohs & O$X) & install the EnigMail Add-On. https://www.mozilla.org/en-US/thunderbird/all.html https://www.enigmail.net/download/ https://www.enigmail.net/documentation/quickstart-ch1.php Looking forward to exchange snooping-free messages with you & making the NSA spend mondo bucks to discover the secret of my bube's kartofel kugel recipe.

9 years, 1 month

1
0
0 0

LED replacement lights and fluorescent fixtures in basement

by Jake

regarding the flourescent light ballasts in the basement, i believe the replacements i installed were inductive but they may have been electronic. I don't know if they are saying that the LED replacement lamps are _only_ compatible with "inductive" ballasts and not electronic, or if they mean that they are OK with leaving the ballast in place. I do not believe that our lighting fixtures use starters at all though, so I just can't guess whether any particular LED replacement bulbs will work with our fixtures without modifications. the right thing to do would be to order a single LED replacement bulb (or a pair, since sometimes they only work in pairs) and test our ballasts with them. then if they work, we can get more, enough for all the fixtures we need them for. that said, i think that if we have any more working conventional flourescent bulbs in stock (including in fixtures which need a replacement ballast) we should use them up before switching to buying LEDs. -jake On Fri, 31 Mar 2017, Jenny Ryan wrote: > Adding sudo-discuss back in - we could also take the opportunity to make > the basement nicer. A bit more spacious down there and i belueve there is > maybe a projector screen still mounted? > > Basement todos: > * replace some dead flourescents with led flourescents (jake, do u remember > if they're inductive or electronic? Going off of > https://www.google.com/amp/www.instructables.com/id/How-to-Replace-a-Fluore… > * rodent mitigation in some hidden pocket areas, namely kitchen, storage > and furnace room (just bought a roll of 6" x 25' flasking today) > * clean floors > * arrange seating / pews & ambient lighting > > We could make the sudo party the week prior a work party if folks are > game.. just a thought. More thoughts more than welcome! > > Also robb maybe this would be a good test of the modularity of the entrance > hall stage you're building RIGHT NOW as i type :D > > On Mar 31, 2017 4:32 PM, "Marc Juul" <juul(a)labitat.dk> wrote: > >> >> >> On Fri, Mar 31, 2017 at 12:52 PM, Jenny Ryan <tunabananas(a)gmail.com> >> wrote: >> >>> Any folks mind moving May's 5moF to the Disco Room? >>> >> >> I don't mind. might be a bit of a tight fit but should be ok >> >> >> ---------- Forwarded message ---------- >> From: Lynn Howe <lynn.howe(a)gmail.com> >> Date: Fri, Mar 31, 2017 at 10:08 AM >> Subject: Omni Ballroom May 3 scheduling question/conflict >> To: Jenny Ryan <tunabananas(a)gmail.com> >> >> >> Hi Jenny: >> I’m trying to schedule a non-profit theater group for multiple nights of >> performances and rehearsals in the Ballroom in May (which is super tough:) >> because there’s lots going on! >> The request for the Seagull production is for 8 dates, starting with >> Wednesday May 3 from 5 to 11 pm. Sudo room has that night booked for ‘5 >> Minutes of Fame’ . Could that possibly be moved to the Disco Room or in >> the basement hall? >> I hate to bother you because you probably had a hard time getting that >> date as well - but if this works out, we might make some good money! >> Thanks, >> Lynn >> >> >>> _______________________________________________ >>> sudo-discuss mailing list >>> sudo-discuss(a)lists.sudoroom.org >>> https://sudoroom.org/lists/listinfo/sudo-discuss >>> >>> >> >

9 years, 1 month

2
2
0 0

Cool open science remote gigs

by Marc Juul

In open hardware, open software and open curriculum design: https://dataflow.manylabs.org/doc/jobs Get 'em while they're hot! -- marc/juul

9 years, 1 month

2
1
0 0

Re: [sudo-discuss] Fwd: Omni Ballroom May 3 scheduling question/conflict

by Jenny Ryan

Adding sudo-discuss back in - we could also take the opportunity to make the basement nicer. A bit more spacious down there and i belueve there is maybe a projector screen still mounted? Basement todos: * replace some dead flourescents with led flourescents (jake, do u remember if they're inductive or electronic? Going off of https://www.google.com/amp/www.instructables.com/id/How-to-Replace-a-Fluore… * rodent mitigation in some hidden pocket areas, namely kitchen, storage and furnace room (just bought a roll of 6" x 25' flasking today) * clean floors * arrange seating / pews & ambient lighting We could make the sudo party the week prior a work party if folks are game.. just a thought. More thoughts more than welcome! Also robb maybe this would be a good test of the modularity of the entrance hall stage you're building RIGHT NOW as i type :D On Mar 31, 2017 4:32 PM, "Marc Juul" <juul(a)labitat.dk> wrote: > > > On Fri, Mar 31, 2017 at 12:52 PM, Jenny Ryan <tunabananas(a)gmail.com> > wrote: > >> Any folks mind moving May's 5moF to the Disco Room? >> > > I don't mind. might be a bit of a tight fit but should be ok > > > ---------- Forwarded message ---------- > From: Lynn Howe <lynn.howe(a)gmail.com> > Date: Fri, Mar 31, 2017 at 10:08 AM > Subject: Omni Ballroom May 3 scheduling question/conflict > To: Jenny Ryan <tunabananas(a)gmail.com> > > > Hi Jenny: > I’m trying to schedule a non-profit theater group for multiple nights of > performances and rehearsals in the Ballroom in May (which is super tough:) > because there’s lots going on! > The request for the Seagull production is for 8 dates, starting with > Wednesday May 3 from 5 to 11 pm. Sudo room has that night booked for ‘5 > Minutes of Fame’ . Could that possibly be moved to the Disco Room or in > the basement hall? > I hate to bother you because you probably had a hard time getting that > date as well - but if this works out, we might make some good money! > Thanks, > Lynn > > >> _______________________________________________ >> sudo-discuss mailing list >> sudo-discuss(a)lists.sudoroom.org >> https://sudoroom.org/lists/listinfo/sudo-discuss >> >> >

9 years, 1 month

3
2
0 0

Fwd: Omni Ballroom May 3 scheduling question/conflict

by Jenny Ryan

Any folks mind moving May's 5moF to the Disco Room? ---------- Forwarded message ---------- From: Lynn Howe <lynn.howe(a)gmail.com> Date: Fri, Mar 31, 2017 at 10:08 AM Subject: Omni Ballroom May 3 scheduling question/conflict To: Jenny Ryan <tunabananas(a)gmail.com> Hi Jenny: I’m trying to schedule a non-profit theater group for multiple nights of performances and rehearsals in the Ballroom in May (which is super tough:) because there’s lots going on! The request for the Seagull production is for 8 dates, starting with Wednesday May 3 from 5 to 11 pm. Sudo room has that night booked for ‘5 Minutes of Fame’ . Could that possibly be moved to the Disco Room or in the basement hall? I hate to bother you because you probably had a hard time getting that date as well - but if this works out, we might make some good money! Thanks, Lynn

9 years, 1 month

2
1
0 0

Tool use during Biodigester hackathon this weekend?

by Patrik D'haeseleer

Hi all, Daniel Enking is organizing a biodigester hackathon in CCL this coming weekend (Fri evening to Sunday). We were wondering if it would be OK for participants to use some of the tools available in Sudo, including the drill press, chop saw, etc. We are expecting four teams of 2-3 people, so perhaps 12 participants in total, which would mostly be working inside CCL. I think we should at a minimum make sure that everyone signs a waiver if they're not CCL or Sudo members. I'm also trying to arrange for at least one responsible CCL member to be there at all times. And I think we should ask participants for donations to Sudo if they use Sudo's equipment. Opinions? Modifications? Patrik

9 years, 1 month

2
1
0 0

help needed to install front-door opener motor

by Jake

bump, since nothing happened last time i asked for help to do this. note that this ever-important project is 99% done and all we need is for someone to screw it to the wall. ---------- Forwarded message ---------- Date: Wed, 22 Feb 2017 13:04:04 -0800 (PST) From: Jake <jake(a)spaz.org> To: building(a)lists.omnicommons.org, access(a)lists.sudoroom.org Subject: [sudo-access] help needed to install front-door opener motor we have completed assembly of the front-door opening motor and it's ready to be installed at the front door. we need a qualified carpenter to install a 2x4 over the door and attach it to the motor bracket in a way that people will see that it's safely installed. if i do it, it will be safe but it might not look safe, and i'm not interested in doing that. so if you are a carpenter and available to do this, please coordinate with me and/or robb. thanks -jake

9 years, 1 month

1
0
0 0

Payment confirmation: Invoice 1020 (Omni Commons)

by QuickBooks Payments

9 years, 1 month

1
0
0 0

sudoroom vinyl cutter setup and training

by Jake

here i'm replying to you and the sudoroom discuss list. does anyone at sudoroom want to host Cory to set up and demonstrate use of the vinyl cutter he donated? we will need a computer running windows (perhaps the laser cutter laptop?) and a DB9 gender bender adaptor for our rs232 to usb adaptor to fit. On Fri, 27 Jan 2017, Cory Albert wrote: > Fridays or during the day weekdays are usually best for me. Can you add > the sudoroom to this thread? Krystof is also interested in learning to use > it as well but I don't think I have his email > > On Jan 27, 2017 2:47 AM, "Jake" <jake(a)spaz.org> wrote: > > if you email the sudoroom discuss list about it, there will surely be people > who want to meet with you to learn how to use the vinyl cutter > > I'm at sudoroom every tuesday night,but when you came by i didn't arrive > until > right after you left. > > -jake > > > On Fri, 27 Jan 2017, Cory Albert wrote: > > Do you have any friends who have the free time? >> >> On Jan 27, 2017 1:38 AM, "Jake" <jake(a)spaz.org> wrote: >> >> no not yet, still need a db9 adaptor and a windows computer and some free >>> time... >>> >>> On Thu, 26 Jan 2017, Cory Albert wrote: >>> >>> Did you get it running? >>> >>>> >>>> On Jan 19, 2017 11:25 AM, "Jake" <jake(a)spaz.org> wrote: >>>> >>>> ok got it, thanks! >>>> >>>>> >>>>> On Thu, 19 Jan 2017, Cory Albert wrote: >>>>> >>>>> No, you can't have my adapter. I have the software. I can give you a >>>>> >>>>> download link. A straight through female to female should work for what >>>>>> you have now. or this: >>>>>> >>>>>> http://www.ebay.com/itm/like/122202725149?vectorid=229466&lg >>>>>> eo=1&item=122202725149&rmvSB=true >>>>>> >>>>>> >>>>>> On Wed, Jan 18, 2017 at 8:18 PM, Jake <jake(a)spaz.org> wrote: >>>>>> >>>>>> i have a serial to USB, but the connector on the printer is the same as >>>>>> >>>>>> the >>>>>>> connector on the serial to USB, so they don't plug into one another. >>>>>>> Do >>>>>>> you >>>>>>> have the adaptor cable you were using? or know the pinout? does it >>>>>>> need a >>>>>>> null-modem adaptor or is it straight-across? >>>>>>> >>>>>>> do you have the specialized software? or know what it's called? >>>>>>> >>>>>>> >>>>>>> On Wed, 18 Jan 2017, Cory Albert wrote: >>>>>>> >>>>>>> I was using a serial to USB. You can get them for $10 online. You >>>>>>> need >>>>>>> >>>>>>> specialized software to run it as well >>>>>>> >>>>>>>> >>>>>>>> On Wed, Jan 18, 2017 at 12:42 AM, Jake <jake(a)spaz.org> wrote: >>>>>>>> >>>>>>>> ok great! thanks for the donation! I was a little thrown off by the >>>>>>>> DB9M >>>>>>>> >>>>>>>> connector on the printer, since DCE usually has a DB9F (female) >>>>>>>> >>>>>>>>> >>>>>>>>> do you have the serial cord you were using with it? >>>>>>>>> >>>>>>>>> >>>>>>>>> On Tue, 17 Jan 2017, Cory Albert wrote: >>>>>>>>> >>>>>>>>> I would also like to get you set up to use it. Let schedule a time >>>>>>>>> when >>>>>>>>> >>>>>>>>> that could happen >>>>>>>>> >>>>>>>>> >>>>>>>>>> On Tue, Jan 17, 2017 at 7:46 PM, Cory Albert <pcalbert(a)gmail.com> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> I dropped off the cutter and some of the vinyl. I have a bunch >>>>>>>>>> more >>>>>>>>>> >>>>>>>>>> supplies to follow. Twice as much vinyl, extra supplies, car >>>>>>>>>> >>>>>>>>>> magnets. I >>>>>>>>>>> also have an old pro Korg reverb effect module (rack mount) and an >>>>>>>>>>> old >>>>>>>>>>> MIDI >>>>>>>>>>> controller that I would like to donate as well. >>>>>>>>>>> >>>>>>>>>>> On Tue, Jan 17, 2017 at 7:19 PM, Jake <jake(a)spaz.org> wrote: >>>>>>>>>>> >>>>>>>>>>> i'll be there soon >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -jake >>>>>>>>>>> >>>>>>>>>>>> (415)555-1212 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Tue, 17 Jan 2017, Cory Albert wrote: >>>>>>>>>>>> >>>>>>>>>>>> I am here with some stuff. Gonna bring it in >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Jan 16, 2017 1:11 PM, "Jake" <jake(a)spaz.org> wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> yes ok >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, 16 Jan 2017, Cory Albert wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> I can bring the goods tomorrow evening if that works good for >>>>>>>>>>>>>> you? >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Dec 20, 2016 5:00 PM, "Cory Albert" <pcalbert(a)gmail.com> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> I am not gonna make it tonight. Maybe next week. You should >>>>>>>>>>>>>>> have >>>>>>>>>>>>>>> windows >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> PC that can be used to connect to the cutter. Windows 7 or >>>>>>>>>>>>>>> XP. >>>>>>>>>>>>>>> That >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> way I >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> can get you setup. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Mon, Dec 19, 2016 at 10:44 PM, Jake <jake(a)spaz.org> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> we'll take it all and I look forward to meeting Cory if he >>>>>>>>>>>>>>>> makes >>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hardware >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hacking Tuesday at 7PM!!! >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -jake >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Mon, 19 Dec 2016, Effie wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hey friends, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hope the question of which gear donations you want from >>>>>>>>>>>>>>>>> Cory, >>>>>>>>>>>>>>>>> if >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> any, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> got >>>>>>>>>>>>>>>>>> definitively answered here? Seems to have literally got >>>>>>>>>>>>>>>>>> swept >>>>>>>>>>>>>>>>>> out >>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>> eWaste conversation! >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> effie >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Tue, Dec 13, 2016 at 3:30 PM, <hol(a)gaskill.com> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Deed is done thanks to help from Ed and Morgan. Left >>>>>>>>>>>>>>>>>> speakers >>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>> chairs >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> in place as not really e-waste, also sorted some nice large >>>>>>>>>>>>>>>>>> flat >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> sheet >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> metal pieces over to the shop area. Some great >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> perforated/vented >>>>>>>>>>>>>>>>>>> ~20Ga >>>>>>>>>>>>>>>>>>> sheet from that TV that's been taking up space. Still >>>>>>>>>>>>>>>>>>> alot >>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>> desks >>>>>>>>>>>>>>>>>>> piled >>>>>>>>>>>>>>>>>>> up on CCL border, and the robot area could use some >>>>>>>>>>>>>>>>>>> cleanup >>>>>>>>>>>>>>>>>>> and/or >>>>>>>>>>>>>>>>>>> mounting >>>>>>>>>>>>>>>>>>> things to the wall tonight but space is looking great! >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On 2016-12-13 11:58, Morgan Allen wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Just finished lunch, be there in a couple minutes >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Tue, Dec 13, 2016 at 11:54 AM, <hol(a)gaskill.com> >>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I'm here and CRV 1/2way loaded up >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On 2016-12-12 15:09, hol(a)gaskill.com wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Ed there is definitely more than will fit. Maybe convoy >>>>>>>>>>>>>>>>>>>> over >>>>>>>>>>>>>>>>>>>> with >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> both loaded up? I think if we can get one extra loader >>>>>>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> addition >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Morgan, I think Ed and I can handle all the unloading. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On 2016-12-12 13:40, Ed Biow wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Hey 'rades, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> If it looks like more than can comfortably fit in a CRV >>>>>>>>>>>>>>>>>>>>> give >>>>>>>>>>>>>>>>>>>>> me >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> holler >>>>>>>>>>>>>>>>>>>>>> and I can materialize at about noon with my big-ass >>>>>>>>>>>>>>>>>>>>>> F150. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Special Ed >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On 12/12/2016 01:14 PM, Morgan Allen wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I can be there to help load but won't likely be able to >>>>>>>>>>>>>>>>>>>>>> unload. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Mon, Dec 12, 2016 at 11:23 AM, <hol(a)gaskill.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <mailto:hol@gaskill.com>> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I can do an Ewaste run tomorrow around noon - who >>>>>>>>>>>>>>>>>>>>>>> can >>>>>>>>>>>>>>>>>>>>>>> help >>>>>>>>>>>>>>>>>>>>>>> load/unload? Thikning 2-3 people to help load at >>>>>>>>>>>>>>>>>>>>>>> sudo >>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>> one >>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>>>> ride shotgun and unload at facility. It's a CRV >>>>>>>>>>>>>>>>>>>>>>> so >>>>>>>>>>>>>>>>>>>>>>> not a >>>>>>>>>>>>>>>>>>>>>>> huge >>>>>>>>>>>>>>>>>>>>>>> amount but should at least clear the walkway. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Jake what is the unloading environment like, do we >>>>>>>>>>>>>>>>>>>>>>> drive >>>>>>>>>>>>>>>>>>>>>>> up >>>>>>>>>>>>>>>>>>>>>>> next to >>>>>>>>>>>>>>>>>>>>>>> a pile and toss things or how does it work? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On 2016-12-11 20:29, Jake wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> the e-waste run is ready when you are, look at >>>>>>>>>>>>>>>>>>>>>>> all >>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>> stuff >>>>>>>>>>>>>>>>>>>>>>> next to the >>>>>>>>>>>>>>>>>>>>>>> fridge, it's begging for it. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> If you know when it's happening i can try to >>>>>>>>>>>>>>>>>>>>>>> show >>>>>>>>>>>>>>>>>>>>>>> up >>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>> help >>>>>>>>>>>>>>>>>>>>>>> load the truck or >>>>>>>>>>>>>>>>>>>>>>> whatever. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -jake >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Sun, 11 Dec 2016, Morgan Allen wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I second the yes yes yes. Can help with >>>>>>>>>>>>>>>>>>>>>>> e-waste >>>>>>>>>>>>>>>>>>>>>>> run, >>>>>>>>>>>>>>>>>>>>>>> when? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Sun, Dec 11, 2016 at 6:34 PM, Jake < >>>>>>>>>>>>>>>>>>>>>>> jake(a)spaz.org >>>>>>>>>>>>>>>>>>>>>>> <mailto:jake@spaz.org>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> not so fast, Robb says yes to >>>>>>>>>>>>>>>>>>>>>>> everything. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I think we need to do an e-waste run >>>>>>>>>>>>>>>>>>>>>>> before >>>>>>>>>>>>>>>>>>>>>>> we >>>>>>>>>>>>>>>>>>>>>>> would >>>>>>>>>>>>>>>>>>>>>>> even have a place to >>>>>>>>>>>>>>>>>>>>>>> put a >>>>>>>>>>>>>>>>>>>>>>> vinyl cutter, as well as roll the >>>>>>>>>>>>>>>>>>>>>>> giant >>>>>>>>>>>>>>>>>>>>>>> printer/copier >>>>>>>>>>>>>>>>>>>>>>> mystery thing out >>>>>>>>>>>>>>>>>>>>>>> of the >>>>>>>>>>>>>>>>>>>>>>> room and get it out of the building. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -jake >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Sun, 11 Dec 2016, Cory Albert >>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Hmm, I'll take that as a yes. I could >>>>>>>>>>>>>>>>>>>>>>> bring >>>>>>>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>>>>>>> stuff >>>>>>>>>>>>>>>>>>>>>>> over next week >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> sometime. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Sun, Dec 11, 2016 at 5:29 PM, >>>>>>>>>>>>>>>>>>>>>>> robb >>>>>>>>>>>>>>>>>>>>>>> <sf99er(a)gmail.com <mailto: >>>>>>>>>>>>>>>>>>>>>>> sf99er(a)gmail.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> yes, yes, yes, yes, yes! >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Sun, Dec 11, 2016 at 4:14 >>>>>>>>>>>>>>>>>>>>>>> PM, >>>>>>>>>>>>>>>>>>>>>>> Jake >>>>>>>>>>>>>>>>>>>>>>> <jake(a)spaz.org <mailto: >>>>>>>>>>>>>>>>>>>>>>> jake(a)spaz.org >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> attention sudoroom: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> do we want to accept a >>>>>>>>>>>>>>>>>>>>>>> donation >>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>>>>>>> vinyl >>>>>>>>>>>>>>>>>>>>>>> cutter which comes with a >>>>>>>>>>>>>>>>>>>>>>> bunch of >>>>>>>>>>>>>>>>>>>>>>> rolls of different colors >>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>> vinyl >>>>>>>>>>>>>>>>>>>>>>> material? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I know noisebridge has one >>>>>>>>>>>>>>>>>>>>>>> but >>>>>>>>>>>>>>>>>>>>>>> they >>>>>>>>>>>>>>>>>>>>>>> also >>>>>>>>>>>>>>>>>>>>>>> have a lot more space than >>>>>>>>>>>>>>>>>>>>>>> we >>>>>>>>>>>>>>>>>>>>>>> do. I >>>>>>>>>>>>>>>>>>>>>>> understand the rolls of >>>>>>>>>>>>>>>>>>>>>>> vinyl >>>>>>>>>>>>>>>>>>>>>>> take >>>>>>>>>>>>>>>>>>>>>>> up >>>>>>>>>>>>>>>>>>>>>>> most >>>>>>>>>>>>>>>>>>>>>>> of the space. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> he says the machine works >>>>>>>>>>>>>>>>>>>>>>> but >>>>>>>>>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>>>>>>>>> uses >>>>>>>>>>>>>>>>>>>>>>> a >>>>>>>>>>>>>>>>>>>>>>> serial interface, and >>>>>>>>>>>>>>>>>>>>>>> probably >>>>>>>>>>>>>>>>>>>>>>> windows >>>>>>>>>>>>>>>>>>>>>>> software. I think we >>>>>>>>>>>>>>>>>>>>>>> could >>>>>>>>>>>>>>>>>>>>>>> easily >>>>>>>>>>>>>>>>>>>>>>> set >>>>>>>>>>>>>>>>>>>>>>> up a >>>>>>>>>>>>>>>>>>>>>>> computer to dedicate to it >>>>>>>>>>>>>>>>>>>>>>> so >>>>>>>>>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>>>>>>>>> wouldn't be a barrier to >>>>>>>>>>>>>>>>>>>>>>> someone >>>>>>>>>>>>>>>>>>>>>>> who >>>>>>>>>>>>>>>>>>>>>>> wanted >>>>>>>>>>>>>>>>>>>>>>> to use it without going >>>>>>>>>>>>>>>>>>>>>>> through a >>>>>>>>>>>>>>>>>>>>>>> software oddysey first. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> i'm guessing it looks >>>>>>>>>>>>>>>>>>>>>>> something >>>>>>>>>>>>>>>>>>>>>>> like >>>>>>>>>>>>>>>>>>>>>>> this: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> https://productrealization.sta >>>>>>>>>>>>>>>>>>>>>>> nford.edu/content/05-resources >>>>>>>>>>>>>>>>>>>>>>> < >>>>>>>>>>>>>>>>>>>>>>> https://productrealization.st >>>>>>>>>>>>>>>>>>>>>>> anford.edu/content/05-resources> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> /02-processes/10-vinyl-cutting >>>>>>>>>>>>>>>>>>>>>>> /header-images/vinyl-cutter-medium.jpg >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Fri, 9 Dec 2016, Cory >>>>>>>>>>>>>>>>>>>>>>> Albert >>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Jake: do you know of >>>>>>>>>>>>>>>>>>>>>>> anyone >>>>>>>>>>>>>>>>>>>>>>> active in >>>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>>> printed artist's spaces >>>>>>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>>>>>> I >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Cory could donate a >>>>>>>>>>>>>>>>>>>>>>> big >>>>>>>>>>>>>>>>>>>>>>> roll >>>>>>>>>>>>>>>>>>>>>>> of >>>>>>>>>>>>>>>>>>>>>>> vinyl >>>>>>>>>>>>>>>>>>>>>>> and vinyl cutters to >>>>>>>>>>>>>>>>>>>>>>> for >>>>>>>>>>>>>>>>>>>>>>> sign >>>>>>>>>>>>>>>>>>>>>>> making? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> ______________________________ >>>>>>>>>>>>>>>>>>>>>>> _________________ >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss mailing list >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss(a)lists.sudoroom.or >>>>>>>>>>>>>>>>>>>>>>> g >>>>>>>>>>>>>>>>>>>>>>> <mailto: >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss(a)lists.sud >>>>>>>>>>>>>>>>>>>>>>> oroom.org >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> https://sudoroom.org/lists/lis >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> tinfo/sudo-discuss >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> < >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> https://sudoroom.org/lists/li >>>>>>>>>>>>>>>>>>>>>>> stinfo/sudo-discuss> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> Cory Albert >>>>>>>>>>>>>>>>>>>>>>> 415-670-0267 <tel:415-670-0267> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> ______________________________ >>>>>>>>>>>>>>>>>>>>>>> _________________ >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss mailing list >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>>>>>>>>>>>>>>>>> <mailto:sudo-discuss@lists.sud >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> oroom.org> >>>>>>>>>>>>>>>>>>>>>>> https://sudoroom.org/lists/lis >>>>>>>>>>>>>>>>>>>>>>> tinfo/sudo-discuss >>>>>>>>>>>>>>>>>>>>>>> <https://sudoroom.org/lists/li >>>>>>>>>>>>>>>>>>>>>>> stinfo/sudo-discuss >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- -----BEGIN PGP PUBLIC KEY BLOCK----- >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Version: OpenPGP.js v.1.20121007 >>>>>>>>>>>>>>>>>>>>>>> Comment: http://openpgpjs.org >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> xsBNBFG3btUBB/9+/WJNOSIuc/praK >>>>>>>>>>>>>>>>>>>>>>> PaPOweqXV5s7PGRD+HAnNWF/19YAY3 >>>>>>>>>>>>>>>>>>>>>>> AFtfeoelhhY4sMJoobTaJzcZojznZ1 >>>>>>>>>>>>>>>>>>>>>>> kl/7UuuYCnbJO3Z9kaSMVrVxEZMSLe >>>>>>>>>>>>>>>>>>>>>>> YmW8Hc4ZsTnl9f05DQFy8ABpAvMLmX >>>>>>>>>>>>>>>>>>>>>>> JQXh63BbfzjFqNbSWQfLhrubSM2Elq >>>>>>>>>>>>>>>>>>>>>>> xmN6EsmRyAuEeYlSnal+Di2MlViohp >>>>>>>>>>>>>>>>>>>>>>> CbbagE2D6AZTUECIamTib6+DuLG4XO >>>>>>>>>>>>>>>>>>>>>>> b4GGKHR9TXu2qS1VH6hqcvdEz2MDE5 >>>>>>>>>>>>>>>>>>>>>>> OqZzAnBgcF2dvcOdTk9gAOoR1T+qKj >>>>>>>>>>>>>>>>>>>>>>> IJtg2X0ETbxcPqEXQoXE8VrxN0MLT5 >>>>>>>>>>>>>>>>>>>>>>> JQKTg26+csU4P2w0rEWsUsJombABEB >>>>>>>>>>>>>>>>>>>>>>> AAHNJU1vcmdhbiBBbGxlbiA8bW9yZ2 >>>>>>>>>>>>>>>>>>>>>>> FucmFsbGVuQGdtYWlsLmNvbT7CwFwE >>>>>>>>>>>>>>>>>>>>>>> EAECABAFAlG3btwJEG9pFLKaVEfeAA >>>>>>>>>>>>>>>>>>>>>>> D7hwf+K8LN/kfgi8GTRLiTcuM+hSbm >>>>>>>>>>>>>>>>>>>>>>> uAeiBY+VaJIQFLzoFlt8A0hBlLNPFN >>>>>>>>>>>>>>>>>>>>>>> NmUDxdPrMErdHgZ7HtJW/6RANuBTti >>>>>>>>>>>>>>>>>>>>>>> 5hr3EBguH1GQyK7BbUqJGvaEX4UNRe >>>>>>>>>>>>>>>>>>>>>>> j3uyX3ufXDsIB/3NsKaTyyu+SO0+Hv >>>>>>>>>>>>>>>>>>>>>>> Cn2DwmlfSXcPhoarx6Turizn/WwgtT >>>>>>>>>>>>>>>>>>>>>>> N3tqrMWxxiCKWydLH5xYuz+23BLMdc >>>>>>>>>>>>>>>>>>>>>>> oF/zkbF+7ddFhmyfiFh4Ej9//tsfwP >>>>>>>>>>>>>>>>>>>>>>> j2cACU3uLTrcwCo7IxUtkrqMF/fhlm >>>>>>>>>>>>>>>>>>>>>>> LEqjhzDDjq9v7GNWb/5xB2xgTaucJ7 >>>>>>>>>>>>>>>>>>>>>>> /ljuS8nPlZqwCI8NlTgSqC8nyVLyjS >>>>>>>>>>>>>>>>>>>>>>> yVtOzkItcS0UqyW1Mg== >>>>>>>>>>>>>>>>>>>>>>> =V/Ia >>>>>>>>>>>>>>>>>>>>>>> -----END PGP PUBLIC KEY BLOCK----- >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> ______________________________ >>>>>>>>>>>>>>>>>>>>>>> _________________ >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss mailing list >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>>>>>>>>>>>>>>>>> <mailto:sudo-discuss@lists.sudoroom.org> >>>>>>>>>>>>>>>>>>>>>>> https://sudoroom.org/lists/lis >>>>>>>>>>>>>>>>>>>>>>> tinfo/sudo-discuss >>>>>>>>>>>>>>>>>>>>>>> <https://sudoroom.org/lists/li >>>>>>>>>>>>>>>>>>>>>>> stinfo/sudo-discuss> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -----BEGIN PGP PUBLIC KEY BLOCK----- >>>>>>>>>>>>>>>>>>>>>>> Version: OpenPGP.js v.1.20121007 >>>>>>>>>>>>>>>>>>>>>>> Comment: http://openpgpjs.org >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> xsBNBFG3btUBB/9+/WJNOSIuc/praK >>>>>>>>>>>>>>>>>>>>>>> PaPOweqXV5s7PGRD+HAnNWF/19YAY3 >>>>>>>>>>>>>>>>>>>>>>> AFtfeoelhhY4sMJoobTaJzcZojznZ1 >>>>>>>>>>>>>>>>>>>>>>> kl/7UuuYCnbJO3Z9kaSMVrVxEZMSLe >>>>>>>>>>>>>>>>>>>>>>> YmW8Hc4ZsTnl9f05DQFy8ABpAvMLmX >>>>>>>>>>>>>>>>>>>>>>> JQXh63BbfzjFqNbSWQfLhrubSM2Elq >>>>>>>>>>>>>>>>>>>>>>> xmN6EsmRyAuEeYlSnal+Di2MlViohp >>>>>>>>>>>>>>>>>>>>>>> CbbagE2D6AZTUECIamTib6+DuLG4XO >>>>>>>>>>>>>>>>>>>>>>> b4GGKHR9TXu2qS1VH6hqcvdEz2MDE5 >>>>>>>>>>>>>>>>>>>>>>> OqZzAnBgcF2dvcOdTk9gAOoR1T+qKj >>>>>>>>>>>>>>>>>>>>>>> IJtg2X0ETbxcPqEXQoXE8VrxN0MLT5 >>>>>>>>>>>>>>>>>>>>>>> JQKTg26+csU4P2w0rEWsUsJombABEB >>>>>>>>>>>>>>>>>>>>>>> AAHNJU1vcmdhbiBBbGxlbiA8bW9yZ2 >>>>>>>>>>>>>>>>>>>>>>> FucmFsbGVuQGdtYWlsLmNvbT7CwFwE >>>>>>>>>>>>>>>>>>>>>>> EAECABAFAlG3btwJEG9pFLKaVEfeAA >>>>>>>>>>>>>>>>>>>>>>> D7hwf+K8LN/kfgi8GTRLiTcuM+hSbm >>>>>>>>>>>>>>>>>>>>>>> uAeiBY+VaJIQFLzoFlt8A0hBlLNPFN >>>>>>>>>>>>>>>>>>>>>>> NmUDxdPrMErdHgZ7HtJW/6RANuBTti >>>>>>>>>>>>>>>>>>>>>>> 5hr3EBguH1GQyK7BbUqJGvaEX4UNRe >>>>>>>>>>>>>>>>>>>>>>> j3uyX3ufXDsIB/3NsKaTyyu+SO0+Hv >>>>>>>>>>>>>>>>>>>>>>> Cn2DwmlfSXcPhoarx6Turizn/WwgtT >>>>>>>>>>>>>>>>>>>>>>> N3tqrMWxxiCKWydLH5xYuz+23BLMdc >>>>>>>>>>>>>>>>>>>>>>> oF/zkbF+7ddFhmyfiFh4Ej9//tsfwP >>>>>>>>>>>>>>>>>>>>>>> j2cACU3uLTrcwCo7IxUtkrqMF/fhlm >>>>>>>>>>>>>>>>>>>>>>> LEqjhzDDjq9v7GNWb/5xB2xgTaucJ7 >>>>>>>>>>>>>>>>>>>>>>> /ljuS8nPlZqwCI8NlTgSqC8nyVLyjS >>>>>>>>>>>>>>>>>>>>>>> yVtOzkItcS0UqyW1Mg== >>>>>>>>>>>>>>>>>>>>>>> =V/Ia >>>>>>>>>>>>>>>>>>>>>>> -----END PGP PUBLIC KEY BLOCK----- >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss mailing list >>>>>>>>>>>>>>>>>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>>>>>>>>>>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> +++++++++++++++++++++++++++++++++++++++++++ >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> If God is watching us the least we can do is be >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> entertaining. >>>>>>>>>>>>>>>>>>>>>> Unfortunately it is also probably the most we can do. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Edmund Joseph Biow >>>>>>>>>>>>>>>>>>>>>> 328 Haddon Road >>>>>>>>>>>>>>>>>>>>>> Oakland, California 94606 >>>>>>>>>>>>>>>>>>>>>> (510) 763-0591 (try first, messages checked in >>>>>>>>>>>>>>>>>>>>>> morning, >>>>>>>>>>>>>>>>>>>>>> dumb >>>>>>>>>>>>>>>>>>>>>> phone, >>>>>>>>>>>>>>>>>>>>>> no >>>>>>>>>>>>>>>>>>>>>> caller ID, leave number) >>>>>>>>>>>>>>>>>>>>>> (415) 623-6473 (cell) >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> EMAIL: >>>>>>>>>>>>>>>>>>>>>> biow(a)sonic.net - biow(a)riseup.net - biow(a)sonic.net - >>>>>>>>>>>>>>>>>>>>>> ejbiow(a)gmail.com >>>>>>>>>>>>>>>>>>>>>> - >>>>>>>>>>>>>>>>>>>>>> ebiow(a)yasashi.net >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> IM: ejbiow(a)gmail.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> To subscribe or unsubscribe to the lists I moderate >>>>>>>>>>>>>>>>>>>>>> send >>>>>>>>>>>>>>>>>>>>>> an >>>>>>>>>>>>>>>>>>>>>> email >>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>> following: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Subscribe: >>>>>>>>>>>>>>>>>>>>>> occupyoakland-subscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> occupyoaklanddiscuss-subscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> oaklandprivacyworkinggroup-subscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> oaklandpublicbank-subscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> occupyoaklandkitchen-subscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> oaklandlivablewagediscussion-s >>>>>>>>>>>>>>>>>>>>>> ubscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Unsubscribe: >>>>>>>>>>>>>>>>>>>>>> occupyoakland-unsubscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> occupyoaklanddiscuss-unsubscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> oaklandprivacyworkinggroup-uns >>>>>>>>>>>>>>>>>>>>>> ubscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> oaklandpublicbank-unsubscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> occupyoaklandkitchen-unsubscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> oaklandlivablewagediscussion-u >>>>>>>>>>>>>>>>>>>>>> nsubscribe(a)lists.riseup.net >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> (\__/) .~ ~. )) >>>>>>>>>>>>>>>>>>>>>> /O O ./ .' >>>>>>>>>>>>>>>>>>>>>> {O__, \ { >>>>>>>>>>>>>>>>>>>>>> / . . ) \ >>>>>>>>>>>>>>>>>>>>>> |-| '-' \ } )) Warning squirrels: >>>>>>>>>>>>>>>>>>>>>> .( _( )_.' Einstein is on the prowl. >>>>>>>>>>>>>>>>>>>>>> '---.~_ _ _& >>>>>>>>>>>>>>>>>>>>>> You can use a PGP key to encrypt and secure our >>>>>>>>>>>>>>>>>>>>>> messages. >>>>>>>>>>>>>>>>>>>>>> To >>>>>>>>>>>>>>>>>>>>>> start >>>>>>>>>>>>>>>>>>>>>> using >>>>>>>>>>>>>>>>>>>>>> it, you'll need to install an OpenPGP software on your >>>>>>>>>>>>>>>>>>>>>> computer. >>>>>>>>>>>>>>>>>>>>>> Below >>>>>>>>>>>>>>>>>>>>>> you'll find a list of possible solutions for your >>>>>>>>>>>>>>>>>>>>>> operating >>>>>>>>>>>>>>>>>>>>>> system: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Windows: Kleopatra (http://gpg4win.de/download.ht >>>>>>>>>>>>>>>>>>>>>> ml)Linux >>>>>>>>>>>>>>>>>>>>>> : >>>>>>>>>>>>>>>>>>>>>> GnuPG >>>>>>>>>>>>>>>>>>>>>> (https://www.gnupg.org/download/supported_systems.html >>>>>>>>>>>>>>>>>>>>>> ) >>>>>>>>>>>>>>>>>>>>>> OS X: GPG Keychain (https://gpgtools.org/#gpgsuite) >>>>>>>>>>>>>>>>>>>>>> Linux: GnuPG (https://www.gnupg.org/related >>>>>>>>>>>>>>>>>>>>>> _software/frontends.html) >>>>>>>>>>>>>>>>>>>>>> Android: OpenKeychain >>>>>>>>>>>>>>>>>>>>>> (https://play.google.com/store >>>>>>>>>>>>>>>>>>>>>> /apps/details?id=org.sufficien >>>>>>>>>>>>>>>>>>>>>> tlysecure.keychain) >>>>>>>>>>>>>>>>>>>>>> iOS: iPGMail (https://itunes.apple.com/us/a >>>>>>>>>>>>>>>>>>>>>> pp/ipgmail/id430780873?mt=8) >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Once you set up PGP on your computer please import my >>>>>>>>>>>>>>>>>>>>>> public >>>>>>>>>>>>>>>>>>>>>> key >>>>>>>>>>>>>>>>>>>>>> into >>>>>>>>>>>>>>>>>>>>>> your local OpenPGP Key-Manager. The valid PGP keys for >>>>>>>>>>>>>>>>>>>>>> my >>>>>>>>>>>>>>>>>>>>>> biow(a)cubasoldarity.net & biow(a)riseup.net accounts can >>>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>>>>>>>> downloaded >>>>>>>>>>>>>>>>>>>>>> here: http://ebiow.yasashi.net/pgp/ >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> An "easy" way to set up PGP on your computer is to >>>>>>>>>>>>>>>>>>>>>> download >>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>> free >>>>>>>>>>>>>>>>>>>>>> & >>>>>>>>>>>>>>>>>>>>>> open sources Thunderbird email client (available on >>>>>>>>>>>>>>>>>>>>>> Linux, >>>>>>>>>>>>>>>>>>>>>> Windohs >>>>>>>>>>>>>>>>>>>>>> & >>>>>>>>>>>>>>>>>>>>>> O$X) & install the EnigMail Add-On. >>>>>>>>>>>>>>>>>>>>>> https://www.mozilla.org/en-US/thunderbird/all.html >>>>>>>>>>>>>>>>>>>>>> https://www.enigmail.net/download/ >>>>>>>>>>>>>>>>>>>>>> https://www.enigmail.net/docum >>>>>>>>>>>>>>>>>>>>>> entation/quickstart-ch1.php >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Looking forward to exchange snooping-free messages with >>>>>>>>>>>>>>>>>>>>>> you >>>>>>>>>>>>>>>>>>>>>> & >>>>>>>>>>>>>>>>>>>>>> making >>>>>>>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>>>>>>> NSA spend mondo bucks to discover the secret of my >>>>>>>>>>>>>>>>>>>>>> bube's >>>>>>>>>>>>>>>>>>>>>> kartofel >>>>>>>>>>>>>>>>>>>>>> kugel >>>>>>>>>>>>>>>>>>>>>> recipe. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> sudo-discuss mailing list >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> sudo-discuss mailing list >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -----BEGIN PGP PUBLIC KEY BLOCK----- >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Version: OpenPGP.js v.1.20121007 >>>>>>>>>>>>>>>>>>> Comment: http://openpgpjs.org >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> xsBNBFG3btUBB/9+/WJNOSIuc/praK >>>>>>>>>>>>>>>>>>> PaPOweqXV5s7PGRD+HAnNWF/19YAY3 >>>>>>>>>>>>>>>>>>> AFtfeoelhhY4sMJoobTaJzcZojznZ1 >>>>>>>>>>>>>>>>>>> kl/7UuuYCnbJO3Z9kaSMVrVxEZMSLe >>>>>>>>>>>>>>>>>>> YmW8Hc4ZsTnl9f05DQFy8ABpAvMLmX >>>>>>>>>>>>>>>>>>> JQXh63BbfzjFqNbSWQfLhrubSM2Elq >>>>>>>>>>>>>>>>>>> xmN6EsmRyAuEeYlSnal+Di2MlViohp >>>>>>>>>>>>>>>>>>> CbbagE2D6AZTUECIamTib6+DuLG4XO >>>>>>>>>>>>>>>>>>> b4GGKHR9TXu2qS1VH6hqcvdEz2MDE5 >>>>>>>>>>>>>>>>>>> OqZzAnBgcF2dvcOdTk9gAOoR1T+qKj >>>>>>>>>>>>>>>>>>> IJtg2X0ETbxcPqEXQoXE8VrxN0MLT5 >>>>>>>>>>>>>>>>>>> JQKTg26+csU4P2w0rEWsUsJombABEB >>>>>>>>>>>>>>>>>>> AAHNJU1vcmdhbiBBbGxlbiA8bW9yZ2 >>>>>>>>>>>>>>>>>>> FucmFsbGVuQGdtYWlsLmNvbT7CwFwE >>>>>>>>>>>>>>>>>>> EAECABAFAlG3btwJEG9pFLKaVEfeAA >>>>>>>>>>>>>>>>>>> D7hwf+K8LN/kfgi8GTRLiTcuM+hSbm >>>>>>>>>>>>>>>>>>> uAeiBY+VaJIQFLzoFlt8A0hBlLNPFN >>>>>>>>>>>>>>>>>>> NmUDxdPrMErdHgZ7HtJW/6RANuBTti >>>>>>>>>>>>>>>>>>> 5hr3EBguH1GQyK7BbUqJGvaEX4UNRe >>>>>>>>>>>>>>>>>>> j3uyX3ufXDsIB/3NsKaTyyu+SO0+Hv >>>>>>>>>>>>>>>>>>> Cn2DwmlfSXcPhoarx6Turizn/WwgtT >>>>>>>>>>>>>>>>>>> N3tqrMWxxiCKWydLH5xYuz+23BLMdc >>>>>>>>>>>>>>>>>>> oF/zkbF+7ddFhmyfiFh4Ej9//tsfwP >>>>>>>>>>>>>>>>>>> j2cACU3uLTrcwCo7IxUtkrqMF/fhlm >>>>>>>>>>>>>>>>>>> LEqjhzDDjq9v7GNWb/5xB2xgTaucJ7 >>>>>>>>>>>>>>>>>>> /ljuS8nPlZqwCI8NlTgSqC8nyVLyjS >>>>>>>>>>>>>>>>>>> yVtOzkItcS0UqyW1Mg== >>>>>>>>>>>>>>>>>>> =V/Ia >>>>>>>>>>>>>>>>>>> -----END PGP PUBLIC KEY BLOCK----- >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Cory Albert >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 415-670-0267 <(415)%20670-0267> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> Cory Albert >>>>>>>>>>>> >>>>>>>>>>> 415-670-0267 <(415)%20670-0267> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> >>>>>>>>>> Cory Albert >>>>>>>>>> 415-670-0267 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>> Cory Albert >>>>>>>> 415-670-0267 >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>> Cory Albert >>>>>> 415-670-0267 >>>>>> >>>>>> >>>>>> >>>>>> >>>> >> >

9 years, 1 month

5
12
0 0

Algorithms for fun instead of interviews

by Romy Ilano

Ok I want to start a session of algorithms for fun instead of soul killing random job interviews. I completely did badly on my last coding interview on a pretty easy problem! I think I'll start involving real life examples as well as stuff drawn from game development! Sent from my iPhone

9 years, 1 month

1
0
0 0

Re: [sudo-discuss] Lots o'leather

by Patrik D'haeseleer

NICE! I'd love a few of those, but I may not be able to come by Sudo before Friday. I would recommend donating the remainder to the Bay Area Swaporama folks. I can put you in touch if needed. Patrik On Mar 23, 2017 12:27 PM, "Erik Miller" <erik(a)erikmiller.org> wrote: Sudopeeps, A friend of mine is getting out of the business of making guitar straps and was dumping a bunch of leather remnants. A lot of it is patterned, some is not. They are all high quality. They are leftovers from custom amplifier cabinet coverings at Mesa Boogie. I packed the trunk of my car with them and am offering them to the makerz. You all have first dibs on them. If you want them, let me know and I will drop by tomorrow or some other evening this week and unload them. The trunk is packed full. If you are not interested I will keep going down my list.... Cheers, Erik Euthymia Electronics Alameda, CA _______________________________________________ sudo-discuss mailing list sudo-discuss(a)lists.sudoroom.org https://sudoroom.org/lists/listinfo/sudo-discuss

9 years, 1 month

2
1
0 0

Sudo Discuss +Party

by aaronco36

Hi all, Am at the Wednesday night "Party" of 2017-03-22. Bunch of ppl trying to assemble a small ship now. What is going on with the Discuss list https://sudoroom.org/pipermail/sudo-discuss/2017-March/date.html ?? Last post was Mitar's of [sudo-discuss] [Mesh] Help archive free UC Berkeley lectures! Wed Mar 15 14:15:57 PDT 2017 https://sudoroom.org/pipermail/sudo-discuss/2017-March/012989.html TY for some feedback! -A -- aaronco36 aaronco36@ -- http://www.fastmail.com - Does exactly what it says on the tin

9 years, 1 month

4
4
0 0

sudo room 5MoF video stream live now!

by Marc Juul

https://www.youtube.com/watch?v=jjFJ3UTHNpE -- marc/juul

9 years, 1 month

2
1
0 0

totally ridiculous 5 minutes of fame video

by Romy Ilano

I can't make it to the next 5 minutes of fame event, but I'll help promote it. Is it going to be televised? https://youtu.be/qP3mOW0pg70 Here's a totally ridiculous video! I hope to go to the May 5 minutes of fame ... looking forward to you folks accomplishing mutely! ============================= Romy Ilano romy(a)snowyla.com

9 years, 1 month

2
1
0 0

Proposal: SudoRoom Dystopian Science Fiction Night // A Humanities perspective

by Romy Ilano

I have a proposal - a SudoRoom dystopian science fiction night. *Background:* Since the November elections [actually the past 2 years] there's been a sharp uptick in dystopian science fiction novels, especially for young adults. After the election books like *The Handmaid's Tale <https://en.wikipedia.org/wiki/The_Handmaid%27s_Tale>* and 1984 have skyrocket to the top of the bestseller lists. In this climate of fear, many artists' groups are experiencing an uptick in membership. In this time, more than ever, we need well-meaning art, science and the humanities to make sense of a dystopian world that has become reality. *Proposal: *Let's gather all the people who feel overwhelmed by current events and have a Dystopian Tea Party every week. Ideally Wednesdays. While the topics are a little negative, they'll also provide *a positive springboard* - if the future really can go this badly, and it looks like it might happen, what can we do to mitigate or avoid it? If we deregulate auto emissions and return to pollution levels of the 1950s, how can we turn this around and reverse the damage? *Meeting Ideas:* - *Nuclear War night* - Create art around nuclear war hitting San Francisco - Understand the science and art behind nuclear bombs - how would this affect our environment - What political arrangements and military mistakes would provoke a nuclear war? [political science - What kind of clothes could we wear to protect ourselves from nuclear war? - *AntiFeminist Dystopia Night* - What are all the possible scenarios where women's rights could be trampled in the US? Could Texan abortion laws reach California? - art and science fiction around an antifeminist dystopia - Studies of feminist texts like Backlash and The Handmaid's Tale - how science is used to oppress women, how science could be used to free women - *Environmental Disaster Scenario* - Predictive Futures Design topic - As the United States looks increasingly headed for environmental disaster with the assault on the EPA, will our cities look like Delhi and China? - Predictive future illustrations of what a smoggy United States will look like - Design of gasmasks for children in places where auto emissions are deregulated. We could make a 3D printout - Environmental 101 - how does polluting a national park work? What are things that can go wrong when oil pipelines spill? - How can hackers fix Flint Water supply? WHat's the science behind this? - Health Sciences Hacking - Poor americans are probably going to live in increasingly polluted, unhealthy environments with little or no regulation. More air pollution, more cancer. In a predictive futures scenario, what kind of low-end hospitals will exist for these people? What strange new diseases will appear? - *Education Disaster Scenario* - Predictive futures: What happens when education is completely privatized and what dystopian outcomes can happen as more for-profit universities and private religious schools become the only option for US children? - Science Fiction scenarios: we could do a writing workshop. Imagine the US became total theocracy and only conversvative Christian schools believing in creationism were allowed to exist. What kind of evolution underground would form? What if science had to be conducted in secret? - We could design a education disaster scenario textbook. What if only mega corporations took over and presented textbooks full of "alternative facts" ???? - What kind of society would we become if all funding for the arts and humanities were entirely cut at universities, as has been suggested in Florida. What if nobody was only allowed to study a topic if it suited the needs of a mega corporation and no theory was allowed ever? What if people were only allowed to take business and commucinations degrees and had no concept of philosophy? - This would be pretty cool, it'd be fun to have a film project where someone in this society would discover the lost book of humanities and create a secret theater group, then get jailed. - Muslim Disaster Scenario - What if muslims in the United States and Europe were systematically targeted in a way that the jews were by the Nazis in the 1940s? - In a science fiction novels how could noble heroes protect an increasingly muslim minority, as some national organization moves to move them into concentration camps? - This scenario is actually too depressing, but it would be cool to highlight great tMuslim scientists of the past and find safety check scenarios Links - Trump era's top-selling dystopian novels - http://www.bbc.com/news/magazine-38764041 - Women don Handmaid's tale robes to protest Texas abortion laws http://www.avclub.com/article/women-don-handmaids-tale-robes-protest-texas-… ============================= Romy Ilano romy(a)snowyla.com

9 years, 1 month

1
0
0 0

Leather remnants

by Erik Miller

Forgot to add the photo....

9 years, 1 month

1
0
0 0

Lots o'leather

by Erik Miller

Sudopeeps, A friend of mine is getting out of the business of making guitar straps and was dumping a bunch of leather remnants. A lot of it is patterned, some is not. They are all high quality. They are leftovers from custom amplifier cabinet coverings at Mesa Boogie. I packed the trunk of my car with them and am offering them to the makerz. You all have first dibs on them. If you want them, let me know and I will drop by tomorrow or some other evening this week and unload them. The trunk is packed full. If you are not interested I will keep going down my list.... Cheers, Erik Euthymia Electronics Alameda, CA

9 years, 1 month

1
0
0 0

Re: [sudo-discuss] [Mesh] Help archive free UC Berkeley lectures!

by aaronco36

> Hi! > (Some) archiving is being coordinated over this wiki: > http://www.archiveteam.org/index.php?title=UC_Berkeley_Course_Captures > You have also scripts you can use to download things. > Feel free to contribute to the effort. > > Mitar Yeah, as far as scripts to use for downloading things, visited in pretty much consecutive order http://www.archiveteam.org/index.php?title=UC_Berkeley_Course_Captures https://lbry.io/news/20000-illegal-college-lectures-rescued https://lbry.io/quickstart FWIW, although plenty of others probably DO have access to this LBRY for seeing what's already accessible at the UC Berkeley Archive Wiki, couldn't gain access for myself. And a decided No, I'm not yet willing to take the time-consuming effort of describing my situation in detail in order to supposedly "help" the admins-that-be on github.com/lbryio/lbry or wherever else fix their archive accessibility issues :( Too many hoops for me to go thru, so I'll do without these Cal lectures for the present, no problem. -- aaronco36 aaronco36@ -- http://www.fastmail.com - IMAP accessible web-mail

9 years, 1 month

1
0
0 0

Build Your Own Internet! workshop this Saturday, 1-4pm @ Omni Commons

by Jenny Ryan

Greetings, The Peoples Open Network is hosting a skillshare / workshop this Saturday, March 18, from 1-4pm at the Omni Commons (home of the Sudo Room hackerspace), and we'd love for you to join us! >From the event page <https://www.eventbrite.com/e/build-your-own-internet-workshop-tickets-32460…> (plz rsvp so we know how many folks to expect!): Do you think internet should be a public commons rather than a corporate monopoly? Come over to Omni Commons to learn about the history of the internet, how it works, and how to build your own. Meet and mingle with civic hackers and organizers behind peoplesopen.net: an open, community-based, network in the East Bay. Agenda: 1:00pm - Why/what/how of the internet (< 30 minutes) 1:30pm - Snack, mingle, share and experiment 2:00pm - Hands-on workshop with a variety of learning stations such as: rooftop mounting techniques, ethernet cable-crimping, live node link demoing radio propagation, q&a table & non-tech signup station for neighborhood organizers Donations for pizza and internet are enthusiastically accepted ; ) The Omni Commons' ballroom is wheelchair-accessible via a lift in the Entrance Hall, where there is also located a wheelchair-accessible single-stall bathroom. The Peoples Open Network <https://peoplesopen.net> enables anyone to share their Internet connection or extend signal from neighboring nodes. Learn more at peoplesopen.net. The Omni Commons <https://omnicommons.org> is a 100% volunteer-run space for community organizing, collaboration, and creative production located in North Oakland. Learn more at omnicommons.org. *BYOI Workshop * *Omni Commons - Ballroom* *4799 Shattuck, Oakland, California* *Saturday 18 March 2017 1-4pm* *RSVP at https://www.eventbrite.com/e/build-your-own-internet-workshop-tickets-32460… <https://www.eventbrite.com/e/build-your-own-internet-workshop-tickets-32460…> !* -- Jenny Help open a people-powered common space in Oakland, California! https://omnicommons.org/donate `~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~` "Technology is the campfire around which we tell our stories." -Laurie Anderson "Storytelling reveals meaning without committing the error of defining it." -Hannah Arendt "To define is to kill. To suggest is to create." -Stéphane Mallarmé ~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`

9 years, 1 month

1
0
0 0

sudo room 5MoF call for speakers - April 5th

by Marc Juul

The next sudo room 5 minutes of fame is happening on April 5th. Add yourself to the wiki or respond to this email if you'd like to speak for five minutes about something you're working on or excited about! https://sudoroom.org/wiki/5MoF_2017-04-05 We really need more volunteers to help ensure that the event runs smoothly. Last time we had more technical issues than needed. We need: * Someone to talk about what sudo room is and the rest of the omni during waiting periods in between talks (when people are setting up their laptop). * Someone to set up signs guiding people from the outside of the omni to the right area * Someone to sit near the door and take donations (you can still see the talks) * Someone to help set up and clean up the snack table * Someone to talk to speakers and ensure they have what they need (display adapters, internet, sound, etc.) before they have to speak. * Someone to lead a tour around sudo room and the omni during the break * Someone to sit by the audio mixer and adjust volume as needed Please respond to this thread or to me if you're able to help out with any of these. -- marc/juul

9 years, 1 month

1
0
0 0

Got you some pick&place component reels...

by Patrik D'haeseleer

I managed to score some reels of components to feed the pick&place, at a lab we were helping to clean out this morning. Mostly smallish pieces; hardly any full reels. But there should be some good diversity in there at least. I didn't count but I would guesstimate I grabbed maybe a hundred reels or so in total. There's a whole bin full of good quality scope probes, and some other knickknacks as well. I'll try to drop them off before the delegates meeting tonight. Could probably use a hand getting all the boxes out of my car... Patrik

9 years, 1 month

1
0
0 0

roomba scooba charger?

by Jake

do you, or someone you know, have a roomba scooba floor mopper robot? my friend found a scooba in the trash and i sent it to my nephew to play with but there was no charger, and it uses a different connector for the charger plug and I don't know what the pinout is. http://www.ebay.ie/itm/iRobot-Scooba-Power-Supply-AC-Adapter-Charger-Model-… it has a DIN-5 connector like MIDI but it only uses 3 pins. There are pictures of the charger on the web, but the label on the charger shows the pinout for the original barrel connector :p i want to measure someone's scooba charger so i can send him one or something. did you know they're eays to hack and tell them where to drive? they have a serial port and you can just plop a small computer on top and drive it around, looking through the webcam. -jake

9 years, 1 month

2
1
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss