On Tue, Aug 19, 2014 at 11:35 AM, <hol(a)gaskill.com> wrote:
> do y'all know when the fire inspection is scheduled? the more work we can
> get in under the first round the better, if for no other reason than not
> feeling like we immediately need to do more electrical work after the fire
> inspection. i will have alot more time to help out during the next few
> weeks, and would be glad to drive on a home depot run if we're ready to pick
> up supplies this weekend.
My totally non-binding intuition is that fire inspection will happen,
at the very earliest, on a business day between September 1-5. But I
could be wrong.
One important detail which I should have mentioned before, is that
before starting work we need to submit our plan in writing to the
landlord for his approval. In particular, he must approve:
* the scope of the work, before ("as-built") and after
* the licensed electrician signing off
* the cost, as he is paying for 50%
We also need to figure out if this work actually requires its own
building permit.
On Thu, Aug 14, 2014 at 10:47 AM, Whitney Lawrence <whitneyel3(a)gmail.com> wrote:
> I'll be spearheading the 501c(3) efforts. I am going to need all the
> documents related to Sudo, tax documents, official filings to date, list of
> assets and liabilities (COH/ recent bank statement, lease, etc.)
> Additionally, to avoid re-doing work already done, I want to hear about any
> and all efforts related to acquiring 501c(3) status.
Whitney I'm so happy you are doing this, thank you! I don't have all
the documents but I hope some history will help. There is some info on
the wiki here: https://sudoroom.org/wiki/FAQ#What.27s_your_legal_structure.3F
- starting sometime in 2012, Sudoroom was just some individuals
operating with a "DBA". Our bank account and leases were all in their
names.
- In November 2013 we became a CA Nonprofit with a bare minimum
articles of incorporation (
https://sudoroom.org/wiki/Articles_of_Incorporation ) and a board of
directors ( https://sudoroom.org/wiki/Board )
- In December 2013 we got two grants of around $5k each, from
Rackspace and Southern Exposure.
- In early 2014 we finally got a credit union account in our name and
started depositing our Gittip, checks, etc there.
- In June 2014 we signed our Omni lease. IANAL but I think legally
this was Sudoroom's first lease. Our previous lease at 2141 was never
in the corporation's name as such.
For tax filings, I suggest you reach out to our treasurer Max Klein
(copied in this email). I know that he filed our taxes for 2013, at
least.
I dare say there is not much danger of duplicating work, as we have
tended thus far to do the bare minimum required and no more. :)
Hi there,
As you know, the Omni is hosting a community potluck this *Thursday, August
21 from 6 - 8 pm*. As this overlaps with the weekly delegate meeting, we're
asking that each collective send as many representatives as possible to
cover both events.
The potluck is an opportunity to meet our neighbors and fellow community
members and introduce them to the Omni! It's important that we make this
event as fun and welcoming as possible.
Specifically, at 6:30 pm we will make an announcement at the potluck to
introduce each member collective and the Omni overall. If possible, we
would like to have one person from each collective speak for less than 2
minutes about your mission and why you're excited about participating in
the Omni.
*Please respond to this email to let me know who from your collective can
attend the potluck and would be willing to speak on your behalf.* If you're
interested in helping out with the potluck in other ways, check out the CDC
meeting notes here:
http://wiki.omni-oakland.org/w/Event:2014/08/16_Challenging_Dominant_Cultur…
.
Feel free to contact me or the Challenging Dominant Cultures working group (
challengingdominantcultures(a)gmail.com) with any questions regarding the
potluck.
Thanks so much!
Sarah
It seems like Sudo Room should have a presence (i.e. a booth/table) at the
East Bay Mini Maker Faire in Oakland on Oct 19, 2014
To get a 10x10 space, an on-line application must be submitted before Sept
8.
Here's the details:
http://ebmakerfaire.wordpress.com/callformakers/
I'd be willing to help set this up and staff the booth.
Jake,
I understand you are the Lead for the electric install. Please look at the
attached .pdf, I made a first pass on the locations of outlets. I think we
should use the 3 free breaker spaces in the Balcony breaker box, in
addition to the abandoned "marquee" breaker. Looking at the front of the
Sub-panel above the stage it looks like the plan is to power the robot arm
directly from there, with a 30A breaker.
Also we need to figure out the plan for the conduit runs after the outlet
type and locations are finalized. We will need volunteers to help with
prepping the space for install (moving shelving etc away from walls), and
for doing the installation.
Let me know what else I can do to get power to the people! The draft should
be reviewed by everyone to be sure we are planning for all needs.
For example- what are the immediate power needs for the server? Can we
build in the potential for up-sizing? Similarly for the robot arm- where
will it be located? It requires 3phase 240 correct?
Thanks,
Whit
The drill press speed controller has some faulty wiring. I got zapped by it
today, though after having used it for quite some time. I have made note of
this with affixing a sign to the press and locking out the plug with a zip-
tie.
I will be picking up an AC outlet tester ASAP to sort out what is amiss unless
someone else can figure it out or locate one before I anticipate returning on
Wednesday.
Keeping Sudo Room in the loop in case anyone else would like this
info...please pm me if you need to.
Is your friend in Oakland? Has she tried A Safe Place? They're in downtown
and have capacity for 20 women + their children:
http://www.asafeplacedvs.org/
Main number: 510.986.8600
Crisis line: 510.536.7233 (SAFE)
Here is a list of women's shelters in SF:
W.O.M.A.N., Inc. 415.864.4722
La Casa de Las Madres 415.503.0500
Asian Women's Shelter 415.751.7110
S.F. Dept. of Social Services (Adult Services Program) 415.557.5251
There's also this emergency housing directory for Alameda County:
http://www.alamedaco.info/resource/tax_listall.cfm?sw=27471
Your friend may want to call 2-1-1 to speak with a live person if none of
these are fruitful. Let me know if you have any questions!
Hello,
I received an invitation to the Maker Carnival in Beijing, which takes place at the beginning of October. The first one 2 years ago was one of the best Maker-Faire-like events I've ever been to. And I'm bummed that I can't make it to this year's. The organizers asked me to pass this invite along to anyone who might be interested.
The text of the invite email is copied below.
The full invite, with pictures and attachments is here:
https://noisebridge.net/wiki/Maker_Carnival_Beijing_2014
BTW -- I will be leading another Hacker Trip To China (my 4th) for the first 3 weeks of November. I don't have a wiki page set up for it yet, but here is a page for a previous trip:
https://noisebridge.net/wiki/NoisebridgeChinaTrip2
Every trip is different, because the group decides what to do as we go along. But we will visit manufacturers, hackerspaces, schools and universities, and we will be shown around by local geeks everywhere we go. If you are interested in joining me for this year's trip in November, please email me.
Best,
Mitch.
------------------------------
Dear Mitch Altman,
We have the honor of inviting you to the 3rd Maker Carnival held in Beijing, from the date of October 1st to October 3rd, 2014.
The Maker Carnival is one of the biggest international maker’s events in the world. In the past two years we invited thousands of makers and innovation groups to joint us. Now we are calling for your great work.
Exhibition contents: maker works, design, technology, production, innovative services or products, films, art, life pieces, and other relevant projects.
Previous reviews:
http://tech.qq.com/all/ckjnh2012.htm
Previous videos:
http://v.youku.com/v_show/id_XNjg0MTY3NjUy.html
Our slogan for this year is: FROM ZERO TO HERO.
The Maker Carnival this year will be held in Beijing 798 Art Zone and the whole event will take both indoor and outdoor space of 3500 square meters.
During the National Day holidays, the flow of people could hit the total number of one hundred thousand per day in 798 Art Zone.
Your attendance and participation will be highly appreciated.
Please fill out the attached application form to confirm your attendance with your work.
Best Regards,
Beijing Makerspace
Chenwei Wang
N.B : Accommodation expenses will be covered by Maker Carnival.
Please send your personal information and scanned passport photocopy with the application form to:
mcarnival(a)bjmakerspace.com
Hi, I hope this message is OK for the list -- I feel there's probably a lot
of relevant knowledge in this community.
I have a friend -- not a close friend, but somebody I care about and trust
-- who is needing to leave her home due to a volatile situation with her
boyfriend, very suddenly. She is OK for tonight, but she said she has
contacted some shelters and has been put on a wait list, and is not sure
what she can expect.
If anybody knows of good resources, or just has any words of advice, please
send them to me off list. I don't have much experience with something like
this -- I think she is very isolated here, her family is very far away, and
I want to at least point her in a good direction.
Many thanks for any help.
Pete
Hey Everyone,
Great party last night!! Lots of really cool people showed up, including a bunch from Sudo Room. Thanks for coming!
There was lots of great food, drinks, fantastic music, and dancing! I'm told we raised about $1,400! And Marcel got one of our 3D printers to print during the party -- and printed out our logo. :)
Naomi took that photo.
Here's a link to the photos I took at the party last night:
https://www.flickr.com/photos/maltman23/sets/72157646118444548/
BTW, our IndieGoGo campaign is now above $16,000, with 10 days remaining. But we still need to spread the word so we can raise enough funds to pay our electrician and pay IndieGoGo. So, please spread the word!
Best,
Mitch.
Dear Friends :
I would like to request time during this coming Wednesday's sudo meeting to discuss the revised voting proposal for the Omni.
I understand there are concerns about this proposal coming from the sudo community, and I want to work them out in your meeting so we can pass this proposal.
Please let me know when I should come, & thanks for your consideration !
Love & solidarity -- David Brazil
http://spaz.org/~jake/robot/trip_over_cables.png
okay so we really really almost got the robot working tonight
we replaced the memory battery, and temporarily disconnected the other
memory battery and then initialized its brains..
and now it seems ready to turn on and move! but when you press SERVO ON
it tries to turn on the motors, and then says there's an error.
I think it's because we don't have three-phase power for it. But i
believe we can simulate the signal of a third phase for the circuitry, so
that it will think that everything is OK, and then it will act normally.
in the meantime, i discovered a treasure trove of documentation. If you
were asking before how to operate this thing (once it's functional) here's
the answer: read these PDFs.
http://spaz.org/~jake/robot/
-jake
Hello everyone,
I posted this event on Introduction to Javascript today:
https://sudoroom.org/events/intro-to-javascript/
This is intended for beginners but all skill levels are welcome. I know for
me initially learning to program was a bit daunting. There are lots of
technologies and programming languages out there. It can be hard to figure
out what to learn. Through this series it would be cool to get people on a
track of learning how to learn programming. Open to everyone, totally free,
6pm today
Connor
questions: 415-717-5557
Hey hackers,
For those of you who don't know about the great Noisebridge reboot and
party going on tomorrow, it's on like flan at 7! If anyone wants to help
volunteer, now is a great time to get in contact with Christina! It's
going to be fantastic!
https://www.facebook.com/events/700607453322351/
I'll be there at some point!
Much love,
Praveen
---------- Forwarded message ----------
From: daravinne <daravinne(a)gmail.com>
Date: Thu, Aug 14, 2014 at 5:11 PM
Subject: [Noisebridge-discuss] Noisebridge reboot party need volunteers!
To: noisebridge-discuss Discuss <noisebridge-discuss(a)lists.noisebridge.net>,
build <build(a)lists.noisebridge.net>
hey peeps, the reboot party badly needs volunteers tonight and tomorrow
afternoon to help rearrange the space to accommodate, well, a party! we are
still deep in construction mode so any hands that can help stack and
shuffle stuff are much appreciated! classes are on tonight, so there will
be people around the space / doors open, as well as tomorrow afternoon.
show up and help, and then help celebrate!
_______________________________________________
Noisebridge-discuss mailing list
Noisebridge-discuss(a)lists.noisebridge.net
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
Danielle got a huge pile of yummy food donated by a farmers market in Oakland for the Noisebridge Grand Re-Opening Party tomorrow: Hummus, veggies, olives, other dips, a ridiculous amount of strawberries . . .
But she needs someone to grab the stuff from her tonight, since she has an early morning appointment tomorrow.
Anyone have a vehicle and wanna help grab the food from Oakland to Noisebridge tonight? If so, please contact me off-list, and I'll give you Danielle's contact info.
Thanks,
Mitch.
HI all,
I just joined the mailing list not too long ago. I was going to stop
by over the weekend to checkout the space and meet whoever is lurking
around. I just wanted to see if there was any trick to getting in.
Noisebridge has that quirky phone that never seems to work.
Also, I'm a tech/linux enthusiast/developer/foss hippy that moved to the
bay area a few years ago. Would love to get more involved especially as
I'm debating moving to Oakland at some point in the foreseeable future.
--
Thank you
Samir Faci
Hello,
I'll be spearheading the 501c(3) efforts. I am going to need all the
documents related to Sudo, tax documents, official filings to date, list of
assets and liabilities (COH/ recent bank statement, lease, etc.)
Additionally, to avoid re-doing work already done, I want to hear about any
and all efforts related to acquiring 501c(3) status. My goal is to have an
initial draft of our application prepared for members review by the
middle/end of October 2014. Hopefully we can submit our finalized
application before the holiday season. I look forward to working toward
this important goal but I can't help without input from our more seasoned
members.
Please contact me with documentation, suggestions, experiences yada yada
yada.
-Whit
Noob post, let me know if I'm not formatting properly or otherwise screwing
this up.
I have experience doing this type of install, I am not licensed. I think
$400 is a fantastically cheep deal (labor and materials), however, I will
need to discuss to be sure I have a handle on the scope of what Sudo wants.
I am available this weekend to work on the install and am totally wiling to
follow someone else's lead. We can borrow condi benders from the tool
library up the street (tele @51st), they might even have a pull-tape which
we will need. Lets talk to coordinate material lists, tools, and meeting
time.
I would suggest opting for quad plugs rather than duals, metal boxes w/
metal faces and individual wire spools for the the pulls (14awg white, blk
and green).
We need to make drawings of where the outlets will be & where we will
access power. This is important because we may need to put in junction
boxes for long runs and/or increase the condi size over 1/2 inch, and we
are likely installing new 20A braker(s).
Lastly, who will be signing off on the work prior to making it HOT?
you can reach me at
510.396.5510
Thanks,
Whitney
Hi all,
A lot of folks are helping to document everything that's going on in
Ferguson on the St. Louis LocalWiki: http://localwiki.net/st-louis/
You can see how much has been added just tonight:
http://localwiki.net/st-louis/Ferguson
But there's a lot more needed:
http://localwiki.net/st-louis/Ferguson_Pages_Still_Needed
You can help document everything that's going on by:
- Adding information - links to news articles, etc.
- Boosting the signal - you can get on social media & invite people to
help contribute.
Thanks for your time,
Marina
Please come to the **Noisebridge Grand Re-Opening Party** this Friday evening.
We are ready to rock, and want you to come help us celebrate!
Comedy! Music! Food! Drink! Demos! Awesome people! You!
https://noisebridge.net/wiki/Noisebridge_Grand_Re-Opening_Party!
6pm to 10pm
I contacted an electrician who did work at my workplace a while ago, and
asked about our situation (specifically at sudoroom)
he charges $45 per hour and can provide a proper invoice, however he is
not a "C10" certifiable electrician. But the work he would do would
satisfy a C10 (such as the one he knows) if we were to hire one to "sign
off" on stuff.
Unless someone on one of these lists has a conduit bender and enjoys
running pipe and installing outlets (while following all obscure rules), I
think we should hire Taylor to install outlets in sudoroom (and wherever
else they are needed)
I volunteered to be his helper, working (and managing other volunteers) to
help the job go as quickly as possible, thus saving money and his time.
But I would need approval from whatever group would be paying for his
labor, and the materials that we will need to do the job.
my guess is that the job will cost $400 including materials, but i have
never done a job like this before so it is only a guess. My notes are
here:
https://docs.google.com/spreadsheets/d/1Fgw5himtlmemiXReP-fG6rP-I2RoXsSP_MA…
thank you
-jake
Hi Sudoers,
Wanted to invite you to an event that I'm hosting on Thursday eve:
*Intelligent Assistance and Trusted Conversations*
http://sl-co.com/intelligent-assistance-and-trusted-conversations/
Thursday 14 August, 6:30pm to 8pm
The speaker, Dan Miller, is an analyst with Opus Research (not selling
anything).
In light of all the news about voice, AI, and biometrics being used to
"save you from passwords" or identify you by your walk and movement, or
extend Siri to actually check your calendar AND book a reservation in
the same request... there's a lot of intriguing technology in this
field. If you use a phone, you're part of it.
The talk is free.
judi
--
*San Leandro Coworking*
400 Estudillo Ave., #204
San Leandro, CA 94577
+1-510-398-4000
http://sl-co.com
SUPER-THANKS to 'Kare Raisu' for bringing the punch down tool and
helping with the first patch panel!
We got the first patch panel completed, and Kare agreed to continue
working on the second one on Wednesday.
The first part took way longer than I expected. Well, it was our first
one ever. We learned lots of little tricks on how to proceed best.
At first it seems like just plug it in and punch it.
There were little unknowns that we didn't know that we now know. :)
>
>
>
> On Sun, Aug 10, 2014 at 6:32 PM, Somebody <somebody(a)riseup.net
> <mailto:somebody@riseup.net>> wrote:
>
> Well, it seems that we don't have a Punch Down tool
> (https://en.wikipedia.org/wiki/Punch_down_tool) to finish the job.
> I even went home and spent about 20 minutes looking for it, no
> luck. Definitely MIA.
>
> Anyway, I have cut the 24 pieces and I am in the process to
> prepare the ends. After that is when the Punch Down tool is
> needed.
> We need that tool.
>
> Please let us know if we may use yours.
>
> Thx!
>
>
>
> On 8/10/14, 5:06 PM, Somebody wrote:
> > The network cable saga continues. Yes, it does. Its tiresome at times. :)
> >
> > Hello All,
> >
> > The two boxes of donated cable are a bit quite confusing,
> at least for me. :)
> > I am not sure if they are really CAT6 or simply CAT5e;
> regardless than it claims to be a "GigaSPEED" cable.
> > I attached an image of their label so you can see what I am
> mean.
> >
> > Anyhow... I am taking the task of setting up the two donated
> CAT5e patch panels between the Switch Rack to Server Rack.
> Hopefully it will be done this evening.
> >
> > And just you know, it won't hurt my feelings if it is
> decided that this cable sucks. We can always remove it, and
> install something that we really know what it is.
> >
> > Thx!
> >
> >
> >
> >
> > On 8/8/14, 2:29 PM, max b wrote:
> > > I totally read up to "should I take them?" and almost
> yelled at my computer YES!!!
> > >
> > >
> > > On Fri, Aug 8, 2014 at 1:45 PM, Somebody
> <somebody(a)riseup.net <mailto:somebody@riseup.net>
> <mailto:somebody@riseup.net> <mailto:somebody@riseup.net>> wrote:
> > >
> > > Hello all,
> > >
> > > Good news! I got an email offering 2 almost full boxes
> of CAT6 cable.
> > >
> > > Should I take them?
> > >
> > > Kidding! I replied yes and went to get them. I will
> bring them in tonight.
> > >
> > > More deets later, I am in my lunch time w the food in
> front of me and I am really hungry. :)
> > >
> > > Thx!
> > > _______________________________________________
> > > sudo-discuss mailing list
> > > sudo-discuss(a)lists.sudoroom.org
> <mailto:sudo-discuss@lists.sudoroom.org>
> <mailto:sudo-discuss@lists.sudoroom.org>
> <mailto:sudo-discuss@lists.sudoroom.org>
> > > https://lists.sudoroom.org/listinfo/sudo-discuss
> > >
> > >
> >
> > --
> >
> > “Our prime purpose in this life is to help others. And if
> you can't help them, at least don't hurt them.” ~Tibetan Quote
> >
> >
> >
> > _______________________________________________
> > sudo-discuss mailing list
> > sudo-discuss(a)lists.sudoroom.org
> <mailto:sudo-discuss@lists.sudoroom.org>
> > https://lists.sudoroom.org/listinfo/sudo-discuss
>
> --
>
> “Our prime purpose in this life is to help others. And if you
> can't help them, at least don't hurt them.” ~Tibetan Quote
>
>
> _______________________________________________
> sudo-discuss mailing list
> sudo-discuss(a)lists.sudoroom.org
> <mailto:sudo-discuss@lists.sudoroom.org>
> https://lists.sudoroom.org/listinfo/sudo-discuss
>
>
--
“Our prime purpose in this life is to help others. And if you can't help them, at least don't hurt them.” ~Tibetan Quote
Hey everyone at sudo discuss!
My name is Matt and I am looking for a person who is good with 3D printer
mechanics to work on my Ultimaker v1.
There are only a few minor problems with it such as the axis are
misaligned, and I want to add a heated bed (requires a relay and some
soldering and wiring)
this stuff is super easy for someone who knows what they are doing. i do
not haha.
would anyone be willing to fix this problem for me? I can give you many
frankinscents and muur
Hello all,
Good news! I got an email offering 2 almost full boxes of CAT6 cable.
Should I take them?
Kidding! I replied yes and went to get them. I will bring them in tonight.
More deets later, I am in my lunch time w the food in front of me and I am really hungry. :)
Thx!
Hi sudoers.
I added some donation guidelines so people will know what to bring and what
not to bring to sudo room:
https://sudoroom.org/wiki/Donations
Now we can just point people here if they ask about dropping off donations.
I also added a link to this page from the left menu of the sudo wiki.
Of course feel free to edit/append if you don't agree with the list.
--
marc/juul
Just another note - if Sudoers that are at Omni today could possibly:
- start moving Sudo basmeent things into Sudo any time (copier, etc)
- make a place for those things in Sudo
That'd be great. Thanks!
David
Hi all,
MaptimeSF <http://www.meetup.com/Maptime-SF/> is having an OpenStreetMap
10th Anniversary Party and OSM mapathon this Saturday from 2-5PM at the
Stamen Design office in SF.
I've been meaning to check out MaptimeSF and meet some of the folks in the
geo community in the area and this seems like a perfect occasion.
(Especially since mapping is such a core part of LocalWiki
<http://localwiki.org>) Hope to see you there!
Details:
http://www.meetup.com/Maptime-SF/events/199399492/?fromJoin=199399492
- Marina
Greetings comrades, cronies, & contemporaries,
As I may have intimated, I'm spending the moeity of the month of August
canoe camping on our favorite lake in the Sierras, Utica Reservoir.
<http://www.ebiow.yasashi.net/images/UTICA/> It is really lovely here,
about 3.5 hours from Oakland at about 7,000 feet, great swimming and
hiking, and since this is dispersed camping, you don't have to pay fees,
listen to generators or suck SUV fumes. Anywho, I schlepped along a
metric buttload of extra gear, so if you feel so inclined, please come
on up. I have 3 extra tents, 5 sleeping bags, pads, plates, utensils,
stoves, tables, chairs, cooking gear, the whole magila, so you only need
to bring your clothes and any food you might want to consume (I'll have
plenty of rice and beans, but few other goodies). I'll be here until
August 30th because I have a funeral in Watsonville on the 31st.
August 2014
Su Mo Tu We Th Fr Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
The problem is where I'm camping is not immediately obvious if you
haven't been here before (which many of you have). I'm at Point Edmund,
to those who have been here, our favorite spot. And even many of you
who have been here do not remember the specific directions well. So
best is if you can hook up with my first wife Kathy, who is coming up
Friday the 15th at about 1 PM and Thursday the 21st at roughly 5:30 PM.
She'll be returning Sundays. She has room for 1 or 2 extra folks on the
15th & maybe 1 on the 21st, but you can caravan with her and she can
lead folks to the spot. You can call her on her cell phone at
510-326-9328 or try our home phone at 510-763-0591. Or you can try to
hook up with one of the people who has been here before and of course,
if you know the way, feel free to come by whenever you want.
If there is enough interest I might also go back to the hills in
mid-September for a stretch, about the same time as the infamous Occupy
Utica <http://www.ebiow.yasashi.net/videos/OccupyUticaLake_2013.avi>
escapade last year.
The hopes of the free (or at least the very cheap) world go with you,
Ed
PS: I don't have internet up here and will only be scanning my email
periodically from a nearby internet cafe. Those of you with deep
pockets and ATT phone service can get reception here. Kathleen is not
an internet afficiando. Her schedule is fairly rigid, so if you wish to
join her you should be at Slothaven on time.
Hey guys. My name is Matt.
I don't know if this message went through last time, so I am sending it
again, and sorry if you are seeing this twice
I have a Ultimaker v1 that needs a heated bed added to it ( have the
parts except relay) and the axis' realigned. Simple stuff but I am not
mechanically inclined enough to know what strength relay I need, or know
how to solder and wire things.
If you know how to build a 3D printer, and are confident that you can
handle this task, get in touch through this email deal-e-o and lets talk.
I can get you some money in exchange for your services of course. Or
maybe some prints!
Apologies for the delay. Meeting notes from this week!
tl;dr:
ANNOUNCEMENTS:
- Sudo sponsoring event with Critical Resistance on September 20th w/
Cece McDonald
- Startup weekend Sept 12-14 - 50% discount codes - talk to Brendan...
or just use 'sudoroom'. Free food! $25!
- Next Newbie Night: Wednesday, August 13th, 5-8pm hosted by Juul & Jake!
NEW MEMBERS!
...up for 'extended pondering' this week. Please reply if you have any
objection to these new members!
- Timothy
- Why do you want to be a member? Likes working with other people,
would be nice to work here
- What are you excited to do at sudo room? Hacking on his own stuff,
open source, perhaps collaborators?
- What do you hope to share with Sudo Room? Pair programming, sudo
web infrastructure, doesn't do php really (mostly ruby)
- Hasn't been banned from a hackerspace!
- Boyd
- Why do you want to be a member? I like this new movement for
hacktivism around the world and making things that already exist work
better.
- What are you excited to do at sudo room? I'm not very good with
code, but I think it'd be cool if I was. Found out about sudo from
Andrew/backspace, used to come to the leather workshop. Moved close by,
interested in the mesh. Scarred by previous Comcast employment.
Democratizing internet access. Likes climbing and being handy
- What do you hope to share with Sudo Room? Sharing excitement and
enthusiasm.
- Has not been kicked out of a hackerspace, that they know of.
- Grew up in the midwest. Cops were nice there and gave you ice cream
for wearing your bike helmet.
- Really wants to see the robot do cool things.
CONFLICT RESOLUTION:
(via Hol):
1. No conclusive evidence found to support accusation based on review of
available info over 2 weeks. Whatever we do now sets the precedent for
future cases - person who brought the matter up (daniel) is OK to allow
Phil back in. Felt it was his duty to speak up since the concern had not
been proactively addressed by Phil.
2. Further research continues as to nature of threat to privacy and risk of
disruption from outside groups with ill intentions. Sudoers interested in
the topic of entities related to this accusation, particularly the DAC,
should feel free to get in touch and assist with research.
3. Consensus is a process susceptible to disruption. We should think about
cases when it is better to fork into parallel paths to avoid gridlock, and
consider ways to amend our policies to become structurally hardened against
this type of attack. In some cases, it may seem that consensus on an item
has been reached when discussion is still warranted, and dissenting views
may trigger accusations of intentional disruption. People may have
conflicting views or different approaches socially, legally, etc. Emphasize
respect for different points of view while keeping an eye out for
intentional disruption. Need to be able to handle and attenuate disruption
whether intentional or unintentional.
Meeting minutes recorded for posterity at:
https://sudoroom.org/wiki/Meeting_Notes_2014-08-06
Jenny
http://jennyryan.nethttp://thepyre.orghttp://thevirtualcampfire.orghttp://technomadic.tumblr.com
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
can someone help me understand the unit W/m.K
it's a measurement of thermal conductivity of a material. I don't really
understand. I get W/K or K/W but i don't understand where the meter comes
in.
For a flat material of a specified thickness, i would understand watts per
degree per square meter, but i don't get the single meter thing.
here is an example:
http://www.sciencedirect.com/science/article/pii/S001122759700146X
how does that measurement work?
Hi,
I know that SudoRoom isn't Open yet.
When SudoRoom reopens will be there be a TODAY I LEARNED?
I never got around to demo'ing the RenPy game*: SudoRoom LOVE STORY*
https://github.com/romyilano/SudoRoom-Love-Story
It would be fun to show it.
Cheers,
Romy
=============================
Romy Ilano
romy(a)snowyla.com
On Thu, Jul 24, 2014 at 10:59 AM, yar <yardenack(a)gmail.com> wrote:
> But we never actually followed up with the IRS. We still
> have to file our 1023 to officially ask for 501c3 status.
We should follow this thread closely. :)
http://lists.hackerspaces.org/pipermail/discuss/2014-August/009823.html
"[hackerspaces] Examples of IRS 1023 froms Nonprofit Makerspaces"
As some of you have noticed I can be flakier then a lethal case of
psoriasis, but I've finally got a couple of images ready to muck with
those 50 or so machines that are providing cover for the rats' nest
right now. Unfortunately, I'm planning on leaving town for a few weeks
to go camping so I won't be able to show folks how I'd like to process
the buggers. But I have actually typed up a set of instructions if
folks can't be bothered to await my second coming.
I took one of the dual core machines, installed Kubuntu 14.04, imaged it
and then set it up as a local server. It is over towards the computer
hardware wall on one of the tables, ready for enterprising folks to have
at. It is a boxy Dell a wifi PCI card so it can get the internet and its
ethernet is configured to provide a connection of other boxes through a
little switch. The machine (whose hostname is Spartacus) is also
attached to a KVM switch so it can share its monitor, keyboard and mouse
with up to 3 other machines that are being worked on. There is a black
button to control which machine has the KVM's attention at the moment.
So Spartacus is configured with a number of services.
1. Apache web server which has the incomplete instructions about how to
image the new boxes (there is also a crumpled piece of paper there with
some of the instructions).
2. Samba file server to host the images, one for the old Dells under the
server rack (40 GB hard drives) and the other for the somewhat newer
dual core machines near the 3D printer.
3. Approx, a deb installation file caching proxy, so you can quickly
download and install Debian and Ubuntu packages instead of downloading
them afresh for each machine. When I have time when I get back I'll put
the approx cache on an encrypted partition so it will be harder to muck
with. I'll also use the machine to host Linux & BSD distro isos. I'll
also include instructions about how to use approx for your personal
machines with a few easily-to-follow instructions.
I put all that stuff at sudoroom, but wasn't able to totally finish the
instructions when I was there. But I mailed an updated "index.html"
file and an updated installation script to an account that I set up on
Spartacus and its clones, sudoroomie(a)gmail.com. If some helpful person
wants they can open Thunderbird, download the 2 files and put up them in
/var/www/html. You'll have to sudo to get them there, that directory is
owned by root.
Anywho, the upshot is, boot up Spartacus, hook up a machine you wish to
image, then follow the directions on Spartacus (use a web browser to go
to http://localhost). You can use the live CDs or the 256MB USB stick I
left there to install the image. When I get back I'll make another
install image or two for Debian testing and maybe a 64 bit Ubuntu 14.04
image, as well.
The instructions are annoyingly long and don't cover many of the cases
that will undoubtedly emerge. If & when I get back in September I plan
to start hosting a regular Friday afternoon/evening Linux InstallFest
where folks can come to get Linux help, share tips, get access to
installation media, and perhaps eat some warmish pizza when I get back
from my weekly donation run at 9PM.
If you want to install Linux on the machines without my image server
there are a bunch of DVDs in a Microsoft Developer kit binder over on
hardware wall. But if you don't want to place the box in a home
somewhere, please label the sucker appropriately so people who want to
use them know what they are getting in to. Also, this should go without
typing, please leave my KVM switch, ethernet switch & USB stick more or
less where they are, or at least tell me where they have been moved.
If any of you are at loose ends this month feel free to join me
dispersed canoe camping
<https://www.google.com/images?q=Utica%20Reservoir&sa=N&tab=wi&gws_rd=ssl>
about 3.5 hours from here in the National Forest in the Sierras. My
first (and so far only) wife Kathy will be driving up on Thursday or
Friday nights so you can get a ride with her or at least have her show
you how to get there. We'll have a couple of extra tents and a few bags
& pads and have extra chairs, plates, etc., so you just need to bring
your food, grog & clothes (provided the camping gear isn't otherwise
spoken for that weakend). I'm hoping I'll be able to get intermittent
Internet access at the coffee shop in Bear Valley, about 3 steep miles
away. Anywho, my home number is 510-763-0591. The phone is even dumber
then I am so you'll have to leave a call-back number loudly and clearly
on our 20 year old $5 answering machine. If I'm spared I'll be back in
early September.
e
On 07/30/2014 09:42 PM, Marina Kukso wrote:
> Hi Ed,
>
> Just a quick ping (with a few other interested parties copied)
> regarding the status of the computers and what we can do to help! If
> the computers are already at sudo and if there's any testing/setup
> that we can do now, just let me know.
>
> Best,
> Marina
>
https://noisebridge.net/pipermail/noisebridge-discuss/2014-August/045106.ht…
i see a lot of tools that sudoroom could use. If you want to sponsor
anything in the pictures, contact the seller or go to the event. If you
want to get something and you want me to pick it up, contact me directly
and let me know what you want and what you'll pay for it.
-jake
On Tue, Aug 5, 2014 at 8:31 PM, Romy(a)snowyla.com <romy(a)snowyla.com> wrote:
> Would it be possible to screen this live at SudoRoom Sunday ? It's about net neutrality . If not that's ok I realize the omni isn't open yet
> http://www.demandprogress.tv/internetmustgo
As long as a Sudoroom member is sponsoring everybody there as a guest,
it's fine for now. Although I'm not sure if we have a projector at the
moment.
Another group has applied to be a member of the Omni Oakland
Collective. Their name is Red Light Legal, a legal firm that
represents and advocates for sex workers. One of them, Matt Kellegrew,
has also done a lot of legal work for the Omni. They are asking for
500sqft of locked office space and want to pay $400/mo now, with the
hope of increasing that later if they get funded. I've forwarded their
full application below. If someone wants to put that in a more
accessible format like a wiki page, feel free.
Please share any thoughts you may have.
Sorry we forgot to mention this yesterday. It's going to be discussed
at tonight's omni delegates meeting.
Hey guys -
Longish story but the inspection will be tomorrow at 9AM.
I will meet the inspector here. I paid for the inspection up front, it was
$158.
Best,
David
Wax into bronze?!?!?!!?!?!?! :D I love chose your own adventure email
threads. I just clicked on the "..." on the sentence: "Also the people who
sold us the robot can turn wax into bronze..."
Would it be possible to screen this live at SudoRoom Sunday ? It's about net neutrality . If not that's ok I realize the omni isn't open yet
http://www.demandprogress.tv/internetmustgo
Sent from my iPhone
Hey sudoers,
Gittip, our primary funding mechanism, doesn't notify you when your credit
card fails to process. This has been happening with increasing regularity
over the past two months (we're now at $338.40/wk, and not long ago we had
tipped $500!). I signed in today and my card had been rejected, so I had to
reenter my info.
Go here and sign in to check: https://www.gittip.com/credit-card.html
Sudo is not rich. We are losing money. I'll be working on setting up
alternative donation options this week. Send me suggestions if you have
them!
~!~
Jenny
http://jennyryan.nethttp://thepyre.orghttp://thevirtualcampfire.orghttp://technomadic.tumblr.com
`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
"Technology is the campfire around which we tell our stories."
-Laurie Anderson
"Storytelling reveals meaning without committing the error of defining it."
-Hannah Arendt
"To define is to kill. To suggest is to create."
-Stéphane Mallarmé
~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`~`
On Tue, Aug 5, 2014 at 12:00 PM, Liberty Madison
<libertymadison(a)gmail.com> wrote:
> I know many people on this list have deep Oakland ties, so I wanted to be
> sure you knew that Oakland is hosting the National Poetry Slam for the first
> time in over 20 years.
> Sudo along side the Bay Area Public school have been a huge supporter of the
> arts and especially poetry.
Cool. We should host the next one at the Omni.
I know many people on this list have deep Oakland ties, so I wanted to be
sure you knew that Oakland is hosting the *National Poetry Slam* for the
first time in over 20 years.
Sudo along side the Bay Area Public school have been a huge supporter of
the arts and especially poetry.
People have flown in from all over the country to be in Oakland. Many of
them have never been to California or The Bay Area. This is their first
experience with the city you hold dear.
If you see one of the 500 poets please welcome them to the Bay!
Many have excellent ideas and vision, it may be a great way to spread
whatever project or message you are working on
Here is the Press Release - They are not sold out as of this email
http://archive.constantcontact.com/fs190/1102722493986/archive/111798197748…
Hope you enjoy it!
@libertymadison
Super Awesome Luis! I was giving up on Cat6A. :)
Luis Murillo <luis.murillo.plos(a)gmail.com> wrote:
>I volunteer for the CAT6A cable, let's touch base this week.
>
>
>
>On Sun, Aug 3, 2014 at 12:32 AM, <somebody(a)riseup.net> wrote:
>
>2014.08.02 Server Room Update:
>
>First at all many thanks to the one (forgot his name, sorry) that waited
>for the delivery on Friday, and to those that helped in the process of
>getting the rack up and going.
>
>The rack server is up and going, but still needs the patch panels, cable,
>and the RJ45 modules. More details below. Anyhow, adding these accessories
>to the rack would make the rack wiring cleaner and easy to follow when the
>time of troubleshooting comes.
>
>Items needed:
>* 1 Patch Panel for Switch Rack (2RU) = Price: $62.12
>http://www.amazon.com/Panduit-CPPL48M6BLY-48-Port-Patch-Panel/dp/B008EKS86Q
>
>* 1 Patch Panel for Server Rack (1RU) = Price: $39.45
>http://www.amazon.com/Panduit-CPPL24M6BLY-24-Port-Patch-Panel/dp/B0083R9PHG
>
>* 24 Category 6A Jack Modules = Price ?
>http://www.panduit.com/heiler/InstallInstructions/N-COPN-511--REVD--ENG.pdf
>
>* Network CAT6A Bulk Cable = Price: $325
>http://www.bestpricecables.com/blue-1000ft-cat-6-plenum-550mhz-premise-hori…
>
>Thanks, and please let me know if you would like to donate any of the
>above items.
>
>Daniel
>
>_______________________________________________
>mesh mailing list
>mesh(a)lists.sudoroom.org
>https://lists.sudoroom.org/listinfo/mesh
>
>