sudo-discuss

sudo-discuss@sudoroom.org

10 participants
7523 discussions

by Jenny Ryan

if anyone's available to help, we'll be doing a 1-2 load haul tmrw (wednesday) at noon! ~basement cruft & entrance hall-clearing focused~

8 years, 7 months

wax printer

by Cere Davis

Hey is the wax primer working at Sudo or what needs to be done to get it functional? Thanks, Cere -- *Cere Davis* Science-Art | Kinetic Sculpture CereDavis.com @ceremona <http://Twitter.com/Ceremona>

8 years, 7 months

Re: [sudo-discuss] wax printer

by Cere Davis

Mkay. Well I'm here. Maybe we can talk about next steps if your around. ...emailing on the go... @ceremona http://ceredavis.com On Dec 5, 2017 5:55 PM, "Cere Davis" <ceremona(a)gmail.com> wrote: Ya, I'm confused as well. ...emailing on the go... @ceremona http://ceredavis.com On Dec 5, 2017 5:25 PM, "Adam" <me(a)adammunich.com> wrote: > hmm? > > > - - - - Begin automatically generated footer - - - - > > I seek to understand, and aim to create. > Weblog: http://adammunich.com > > PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich > > On Tue, Dec 5, 2017 at 4:17 PM, Jake <jake(a)spaz.org> wrote: > >> what, you mean with an LCD monitor? could you do this with the stock >> backlight? >> >> >> On Thu, 30 Nov 2017, Adam wrote: >> >> Actually it just occurred to me... >>> >>> If you wrote an app that calculates the screen size and displays Gerber >>> images, then with a blue filter and fresnel lens you could easily expose >>> photosensitive PCBs (and even align two side ones). >>> >>> On Nov 30, 2017 9:41 AM, "Jake" <jake(a)spaz.org> wrote: >>> >>> you can also do the thing Morgan was doing, where you spray paint the >>>> copper >>>> and then use the laser cutter to remove paint wherever you want, and >>>> then >>>> etch. >>>> >>>> and there's always the toner-transfer method if you can get a laser >>>> printer to >>>> work. >>>> >>>> >>>> On Thu, 30 Nov 2017, Cere Davis wrote: >>>> >>>> Might work. Congrats on getting on of those! Ya, like you said, or >>>> didn’t >>>> >>>>> exactly say, I would need a mask that has an adhesive or have to use a >>>>> vapor, which I’m really not set up to do. As a plan B. Does anyone >>>>> know >>>>> where I can use a high quality vinyl cutter? AMT has a cutter, but I >>>>> can’t >>>>> get much resolution out of it before something ultimately goes to shit. >>>>> >>>>> On Wed, Nov 29, 2017 at 6:29 PM, Adam <me(a)adammunich.com> wrote: >>>>> >>>>> i bought a form labs printer, might be good for making masks? >>>>> >>>>>> >>>>>> >>>>>> - - - - Begin automatically generated footer - - - - >>>>>> >>>>>> I seek to understand, and aim to create. >>>>>> Weblog: http://adammunich.com >>>>>> >>>>>> PGP Public Key: https://pgp.mit.edu/pks/lookup?search=adam+munich >>>>>> >>>>>> On Wed, Nov 29, 2017 at 6:25 PM, Cere Davis <ceremona(a)gmail.com> >>>>>> wrote: >>>>>> >>>>>> I gave up after a thousand paper jams etc. Sucked. >>>>>> >>>>>>> >>>>>>> ...emailing on the go... >>>>>>> @ceremona >>>>>>> http://ceredavis.com >>>>>>> >>>>>>> On Nov 29, 2017 5:55 PM, "Cere Davis" <ceremona(a)gmail.com> wrote: >>>>>>> >>>>>>> Ya, it keeps wanting a cleaing sheet and then jamming when I try to >>>>>>> feed >>>>>>> >>>>>>>> it in via the tray or manual. Gah! >>>>>>>> >>>>>>>> On Wed, Nov 29, 2017 at 5:24 PM, Cere Davis <ceremona(a)gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>> Just tried the other printer after I sent that message. I think >>>>>>>> I’m on >>>>>>>> >>>>>>>>> the right track now. It was the printer with an asset label but >>>>>>>>> without a >>>>>>>>> paper tray, initially. >>>>>>>>> >>>>>>>>> On Wed, Nov 29, 2017 at 5:17 PM, Jake <jake(a)spaz.org> wrote: >>>>>>>>> >>>>>>>>> did you try both? did either one of them print a test page? >>>>>>>>> >>>>>>>>>> (assuming there >>>>>>>>>> was paper in the tray or in the manual-feed loader) >>>>>>>>>> >>>>>>>>>> note that the printer will throw an error if the paper tray is not >>>>>>>>>> present. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Wed, 29 Nov 2017, Cere Davis wrote: >>>>>>>>>> >>>>>>>>>> Ya, no, this printer is just not going to print. If you’re coming >>>>>>>>>> >>>>>>>>>> over to >>>>>>>>>>> sudo tonight, I would love to know what the magic is to making >>>>>>>>>>> this >>>>>>>>>>> thing >>>>>>>>>>> work. >>>>>>>>>>> >>>>>>>>>>> On Tue, Nov 28, 2017 at 9:15 PM, Jake <jake(a)spaz.org> wrote: >>>>>>>>>>> >>>>>>>>>>> one of them works, the other has mechanical problems i think (and >>>>>>>>>>> has >>>>>>>>>>> >>>>>>>>>>> no >>>>>>>>>>>> paper >>>>>>>>>>>> tray?) >>>>>>>>>>>> >>>>>>>>>>>> please put paper notes on the printers with whatever you >>>>>>>>>>>> discover, >>>>>>>>>>>> for the >>>>>>>>>>>> next >>>>>>>>>>>> person... >>>>>>>>>>>> >>>>>>>>>>>> here's my imgur instructable about how to use these printers to >>>>>>>>>>>> etch >>>>>>>>>>>> pyralux >>>>>>>>>>>> circuits (don't forget to bake the ink on before trying to >>>>>>>>>>>> etch!): >>>>>>>>>>>> >>>>>>>>>>>> https://imgur.com/a/TbzsP >>>>>>>>>>>> >>>>>>>>>>>> -jake >>>>>>>>>>>> >>>>>>>>>>>> On Fri, 8 Sep 2017, Cere Davis wrote: >>>>>>>>>>>> >>>>>>>>>>>> Hey is the wax primer working at Sudo or what needs to be done >>>>>>>>>>>> to >>>>>>>>>>>> get it >>>>>>>>>>>> >>>>>>>>>>>> functional? >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> Cere >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> *Cere Davis* >>>>>>>>>>>>> >>>>>>>>>>>>> Science-Art | Kinetic Sculpture >>>>>>>>>>>>> CereDavis.com >>>>>>>>>>>>> @ceremona <http://Twitter.com/Ceremona> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>> *Cere Davis* >>>>>>>>>>> >>>>>>>>>>> Science-Art | Kinetic Sculpture >>>>>>>>>>> CereDavis.com >>>>>>>>>>> @ceremona <http://Twitter.com/Ceremona> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> -- >>>>>>>>> *Cere Davis* >>>>>>>>> >>>>>>>>> Science-Art | Kinetic Sculpture >>>>>>>>> CereDavis.com >>>>>>>>> @ceremona <http://Twitter.com/Ceremona> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> *Cere Davis* >>>>>>>> >>>>>>>> Science-Art | Kinetic Sculpture >>>>>>>> CereDavis.com >>>>>>>> @ceremona <http://Twitter.com/Ceremona> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>> sudo-discuss mailing list >>>>>>> sudo-discuss(a)lists.sudoroom.org >>>>>>> https://sudoroom.org/lists/listinfo/sudo-discuss >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> -- >>>>> *Cere Davis* >>>>> >>>>> Science-Art | Kinetic Sculpture >>>>> CereDavis.com >>>>> @ceremona <http://Twitter.com/Ceremona> >>>>> >>>>> >>>> >

8 years, 7 months

wax printer working

by Jake

i played with the printer on the left last night (the one i used in my circuitboard tutorial) and I started by plugging it into the network. its IP address was 100.64.67.250 (MAC address: 00:00:aa:a7:ba:e0 ) it can also be reached at test-77520.local i opened its address in my web browser and was able to see what its complaint was, it showed graphically which panel was signalling an error (turns out it thought the front was open and i reclosed it) and also the ink compartment lid plastic is broken, so it needs a pencil (normal 1/4" diameter) as a spacer to hold the black plastic thing down and trigger the "door closed" sensor. I was doing other things at the time and then i had to leave to pick someone up from the airport, but when i left the printer was not showing errors and was just asking for more paper. the web interface is essential because the LCD display on the front of the printer is almost totally unreadable because the contrast is out of whack. I was able to see it just enough to help me find it on the network and now we know its MAC address and all that, and i wrote that stuff on a label that i stuck on the front of the printer. I didn't finish doing this, but the printer's web interface allows you to upload a .PS postscript file to it to print, so that means to me that it can be used from any operating system without drivers once we get it working at all. I intend to try again perhaps tonight to get it working. -jake On Wed, 29 Nov 2017, Cere Davis wrote: > Ya, it keeps wanting a cleaing sheet and then jamming when I try to feed it > in via the tray or manual. Gah! > > On Wed, Nov 29, 2017 at 5:24 PM, Cere Davis <ceremona(a)gmail.com> wrote: > >> Just tried the other printer after I sent that message. I think I’m on >> the right track now. It was the printer with an asset label but without a >> paper tray, initially. >> >> On Wed, Nov 29, 2017 at 5:17 PM, Jake <jake(a)spaz.org> wrote: >> >>> did you try both? did either one of them print a test page? (assuming >>> there >>> was paper in the tray or in the manual-feed loader) >>> >>> note that the printer will throw an error if the paper tray is not >>> present. >>> >>> >>> On Wed, 29 Nov 2017, Cere Davis wrote: >>> >>> Ya, no, this printer is just not going to print. If you’re coming over to >>>> sudo tonight, I would love to know what the magic is to making this thing >>>> work. >>>> >>>> On Tue, Nov 28, 2017 at 9:15 PM, Jake <jake(a)spaz.org> wrote: >>>> >>>> one of them works, the other has mechanical problems i think (and has no >>>>> paper >>>>> tray?) >>>>> >>>>> please put paper notes on the printers with whatever you discover, for >>>>> the >>>>> next >>>>> person... >>>>> >>>>> here's my imgur instructable about how to use these printers to etch >>>>> pyralux >>>>> circuits (don't forget to bake the ink on before trying to etch!): >>>>> >>>>> https://imgur.com/a/TbzsP >>>>> >>>>> -jake >>>>> >>>>> On Fri, 8 Sep 2017, Cere Davis wrote: >>>>> >>>>> Hey is the wax primer working at Sudo or what needs to be done to get it >>>>> >>>>>> functional? >>>>>> >>>>>> Thanks, >>>>>> Cere >>>>>> >>>>>> -- >>>>>> *Cere Davis* >>>>>> >>>>>> Science-Art | Kinetic Sculpture >>>>>> CereDavis.com >>>>>> @ceremona <http://Twitter.com/Ceremona> >>>>>> >>>>>> >>>>>> >>>> >>>> -- >>>> *Cere Davis* >>>> >>>> Science-Art | Kinetic Sculpture >>>> CereDavis.com >>>> @ceremona <http://Twitter.com/Ceremona> >>>> >>> >> >> >> -- >> *Cere Davis* >> >> Science-Art | Kinetic Sculpture >> CereDavis.com >> @ceremona <http://Twitter.com/Ceremona> >> > > > > -- > *Cere Davis* > > Science-Art | Kinetic Sculpture > CereDavis.com > @ceremona <http://Twitter.com/Ceremona> >

8 years, 7 months

laser PC board etching

by Jake

Henner made an open-hardware system for UV curing photoresist, and it works: https://github.com/hzeller/ldgraphy On Fri, 1 Dec 2017, Cere Davis wrote: > I mean if it could be UV laser cured with just a laser cutter on low power > etch mode, that would be ideal.

8 years, 7 months

SUDOPAD!

by G Gallo

Hey everybody, Sudo Mesh, Sudo Room, Omni Commons, et al. now has its own etherpad-lite <https://github.com/ether/etherpad-lite> instance running on the mesh and also accessible via "the Internet." Help test it out by going to https://peoplesopen.net/pad and creating your very own collaborative SudoPad. We are currently working on documenting the service on our wiki, https://sudoroom.org/wiki/Mesh/SudoPad, and it is still very much in the testing phase, so use it with caution. cheers, -grant

8 years, 7 months

seeking free lenovo laptop

by Jake

does anyone have a lenovo laptop that has a place for a 3G WAN modem, that they want to give me to play with? If it's an X120e with a broken screen, that works because i just happen to have just the screen for such a computer. replying off-list will avoid clogging people's inboxes who don't care. thank you -jake

8 years, 7 months

Receipt 1260 from Omni Commons

by Omni Commons

Dear Sudo Room, Your receipt is attached. Please retain this receipt for end of year reporting of your gift. Per IRS Regulations, we hereby state that no goods or services were received in exchange for this donation. Omni Commons is a 501(c)3 non-profit organization. Our tax ID is 46-4109670. Omni Commons ------------------------ Receipt Summary -------------------------- Sale # : 1260 Sale Date: 12/25/2017 Total: $2,000.00 The complete version has been provided as an attachment to this email. ---------------------------------------------------------------------

8 years, 7 months

Receipt 1258 from Omni Commons

by Omni Commons

Dear Sudo Room, December rent invoice #1229 was just paid via direct bank transfer. Please pay by the 25th of the month moving forward. Thanks for stewarding the commons! Omni Commons ------------------------ Receipt Summary -------------------------- Sale # : 1258 Sale Date: 11/30/2017 Total: $2,000.00 The complete version has been provided as an attachment to this email. ---------------------------------------------------------------------

8 years, 7 months

Fwd: [omni-discuss] proposal seeking immediate consensus: sign on to a letter to stop Aunti Frances’s eviction

by Jenny Ryan

Two proposals for tonight if we have a quorum of sudoers. This is one: ---------- Forwarded message ---------- From: "Julian Park" <julianfrancispark(a)gmail.com> Date: Nov 29, 2017 2:07 PM Subject: [omni-discuss] proposal seeking immediate consensus: sign on to a letter to stop Aunti Frances’s eviction To: <discuss(a)lists.omnicommons.org>, "consensus(a)lists.omnicommons.org" < consensus(a)lists.omnicommons.org> Cc: "Defend Aunti Frances" <defendauntifrances(a)protonmail.com> Dear Commoners, > > I write because North Oakland/South Berkeley friend, neighbor, and > community leader Aunti Frances, of the Self-help Hunger Program > <https://www.facebook.com/selfhelphungerprogram/>, is facing a no-fault > eviction. With the Omni’s support we may be able to persuade Aunti > Frances’s landlord, owner-resident Natalia Morphy, to stop the eviction. > Natalia is known to identify with principles of social and ecological > justice but is participating in exploiting an eviction loophole with her > parents and co-landowners, Alexandra and James Morphy, and the notorious > eviction law firm Bornstein and Bornstein. > > I ask all Omni delegates contact their collectives to seek an emergency > consensus process regarding the following. I’ve already heard a yes from > Phat Beets. By the end of Friday, Dec 1st, I’m hoping we can get approval > to add the Omni’s (and our individual collective’s) signature to this community > letter > <https://docs.google.com/document/d/1rhavYm6jkgOCrZ2OAV-0XUwBTP_ce_WskSwUsw1…>. > The consensus ask is simply to lend our name(s) to a cause that is > perfectly in line with our statement of solidarity. > > Additionally, I have two asks I don’t think require consensus—first that > folx confirm it would be okay to send additional updates to the discuss > list about how we can support fighting Aunti Frances’s eviction. Second, > that you confidentially ask those involved in your collectives to save > noon Sunday December 10th for a details-to-be-announced public event in > support of Aunti Frances, to be held at Drivers Plaza in Oakland. > > In solidarity, > > Julian, of BAPS, with Defend Aunti Frances > > _______________________________________________ > discuss mailing list > discuss(a)lists.omnicommons.org > https://omnicommons.org/lists/listinfo/discuss > >

8 years, 7 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss