12 Oct
2023
12 Oct
'23
12:34 p.m.
Yes. I took a look at this printer last week again, my first time back to
Sudo after Burning Man followed by covid. I was mostly socializing though,
I just powered on the printer and moved the axes a bit.
Has anyone done more work on determining a correct firmware configuration?
On Thu, Oct 12, 2023 at 11:21 AM Jae Kwon via sudo-discuss <
sudo-discuss(a)sudoroom.org> wrote:
is this email list still going?!
On Wed, Jul 26, 2023 at 12:59 PM Jake via sudo-discuss <
sudo-discuss(a)sudoroom.org> wrote:
We got a really nice 3D printer donation from
someone I hope will start
coming
around and join us! Welcome Scott
-jake
---------- Forwarded message ----------
Date: Tue, 25 Jul 2023 21:39:31 -0700
From: Scott Griffitts
Subject: Re: [sudo-info] 3D printer donation
Hey, Dropped off the printer with Toby and met a few folks who were
excited,
skeptical, and questioning the printer. I figured I would share some info
on
it.
Here is the page on the upgraded Z mod I did:
https://seckit3dp.design/kit/triple-z
Here is the page for the main printer build:
https://github.com/SecKit/SK-Go_SK-Mini
Here is some info on the firmware it can run: https://www.klipper3d.org/
(I think if you do some digging, you can find examples for the kinematic
bed)
Here is the bed probe I used:
https://coex3d.com/products/bltouch-v3-1-automatic-bed-leveling-probe
The stepper motor board used is big tree tech octopus v1.0 with TMC2209
drivers
If you have any other questions let me know :)
Also,
If you guys need volunteers or anything, let me know. I’d love to help
out with really cool people like you guys.
Regards
Scott Griffitts
On Sat, 22 Jul 2023, Scott Griffitts wrote:
_______________________________________________
sudo-discuss mailing list -- sudo-discuss(a)sudoroom.org
To unsubscribe send an email to sudo-discuss-leave(a)sudoroom.org
More options at
https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/
Hi,
My name is Scott. I've been in the middle of
upgrading a Seckit SK-GO² core-XY 3D printer. I'm
about 90% done, but have lost interest in it. The
machine has been an absolute workhorse with its
large build volume, but I think it is time for Oppy
(named after the rover) to move on to a new owner
who can utilize and attend it properly. It needs
about 3-5 hours of work to get it running, and maybe
3hrs of tuning. Worst case, it is loaded with
aluminum extrusions, hardware, stepper motors,
linear rails, and a Pi!
Let me know if I can donate the printer to your
space :)
Regards,
Scott Griffitts_______________________________________________
sudo-discuss
mailing list -- sudo-discuss(a)sudoroom.org
To unsubscribe send an email to sudo-discuss-leave(a)sudoroom.org
More options at
https://sudoroom.org/lists/postorius/lists/sudo-discuss.sudoroom.org/