11 Aug
2021
11 Aug
'21
6:18 p.m.
Many years ago I had my small CNC hosted at sudo, I don't think it got much
use as I wasn't around to help people learn it. Currently that machine is
just sitting in storage now and it feels like a waste to keep it there. I'm
trying to clear out this storage unit and my move out date is the 28th of
this month.
The system was gifted to me, and I have since gotten it working again and
learned a bunch -- I would love to pass that gift along to someone else who
has the time and space to actually use this thing! I would be happy to help
with setup and getting it running wherever it lands.
Runs on mach3 on windows, I'll include the desktop and everything seen
here. I'm guessing it weighs around 150lbs, definitely need a couple people
to move it.
Let me know if I can answer any other questions!
Cheers,
Jack
[image: IMG_8531.jpg][image: IMG_8545.jpg][image:
59E3DE31-F32F-4040-826D-ECF25814A53F.JPG]
11 Aug
11 Aug
7:15 p.m.
New subject: Looking to gift a used CNC to anyone who has the space/time
Hi Jack! I think I remember using this back at Sudoroom in 2012 at the
original space on 22nd street!
Thank you so much for letting us use it. It's a generous offer, but I'm a
little concerned that the Z-axis is limited to just a couple of inches of
travel, and there's no way to machine parts greater than a couple of inches
thick? Is that right?
While i'm very grateful for your support of sudoroom and your offer, i'm
hesitant to say that I think we have the space for it.
Full disclosure though, I brought our Yaskawa K10S robot which works as a very
large CNC! I look forward to firing it up again and showing people how to use
it.
-jake
On Wed, 11 Aug 2021, Jack Kern wrote:
Many years ago I had my small CNC hosted at sudo, I
don't think it got much
use as I wasn't around to help people learn it. Currently that machine is
just sitting in storage now and it feels like a waste to keep it there. I'm
trying to clear out this storage unit and my move out date is the 28th of
this month.
The system was gifted to me, and I have since gotten it working again and
learned a bunch -- I would love to pass that gift along to someone else who
has the time and space to actually use this thing! I would be happy to help
with setup and getting it running wherever it lands.
Runs on mach3 on windows, I'll include the desktop and everything seen
here. I'm guessing it weighs around 150lbs, definitely need a couple people
to move it.
Let me know if I can answer any other questions!
Cheers,
Jack
[image: IMG_8531.jpg][image: IMG_8545.jpg][image:
59E3DE31-F32F-4040-826D-ECF25814A53F.JPG]
8:20 p.m.
I wasn’t really expecting there to be room at sudo, I just know there are a
lot of like minds there and maybe someone wants it for themselves. :)
On Wed, Aug 11, 2021 at 7:15 PM Jake <jake(a)spaz.org> wrote:
Hi Jack! I think I remember using this back at
Sudoroom in 2012 at the
original space on 22nd street!
Thank you so much for letting us use it. It's a generous offer, but I'm a
little concerned that the Z-axis is limited to just a couple of inches of
travel, and there's no way to machine parts greater than a couple of inches
thick? Is that right?
While i'm very grateful for your support of sudoroom and your offer, i'm
hesitant to say that I think we have the space for it.
Full disclosure though, I brought our Yaskawa K10S robot which works as a
very
large CNC! I look forward to firing it up again and showing people how to
use
it.
-jake
On Wed, 11 Aug 2021, Jack Kern wrote:
Many years ago I had my small CNC hosted at sudo,
I don't think it got
much
use as I wasn't around to help people learn
it. Currently that machine is
just sitting in storage now and it feels like a waste to keep it there.
I'm
trying to clear out this storage unit and my move
out date is the 28th of
this month.
The system was gifted to me, and I have since gotten it working again and
learned a bunch -- I would love to pass that gift along to someone else
who
has the time and space to actually use this
thing! I would be happy to
help
with setup and getting it running wherever it
lands.
Runs on mach3 on windows, I'll include the desktop and everything seen
here. I'm guessing it weighs around 150lbs, definitely need a couple
people
to move it.
Let me know if I can answer any other questions!
Cheers,
Jack
[image: IMG_8531.jpg][image: IMG_8545.jpg][image:
59E3DE31-F32F-4040-826D-ECF25814A53F.JPG]
12 Aug
12 Aug
12:44 a.m.
I do not share Jake’s concern and think this would be a fantastic tool.
I’ll get it working and also set up attachments for lasers and such.
But right now I’m in no position to move heavy things until my back heals.
Would you be able to bring it to west Oakland?
On Wed, Aug 11, 2021 at 8:20 PM Jack Kern <jack.w.kern(a)gmail.com> wrote:
I wasn’t really expecting there to be room at sudo, I
just know there are
a lot of like minds there and maybe someone wants it for themselves. :)
On Wed, Aug 11, 2021 at 7:15 PM Jake <jake(a)spaz.org> wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
Hi Jack! I think I remember using this back at
Sudoroom in 2012 at the
original space on 22nd street!
Thank you so much for letting us use it. It's a generous offer, but I'm a
little concerned that the Z-axis is limited to just a couple of inches of
travel, and there's no way to machine parts greater than a couple of
inches
thick? Is that right?
While i'm very grateful for your support of sudoroom and your offer, i'm
hesitant to say that I think we have the space for it.
Full disclosure though, I brought our Yaskawa K10S robot which works as a
very
large CNC! I look forward to firing it up again and showing people how
to use
it.
-jake
On Wed, 11 Aug 2021, Jack Kern wrote:
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
Many years ago I had my small CNC hosted at sudo,
I don't think it got
much
use as I wasn't around to help people learn
it. Currently that machine
is
just sitting in storage now and it feels like a
waste to keep it there.
I'm
trying to clear out this storage unit and my move
out date is the 28th
of
this month.
The system was gifted to me, and I have since gotten it working again
and
learned a bunch -- I would love to pass that gift
along to someone else
who
has the time and space to actually use this
thing! I would be happy to
help
with setup and getting it running wherever it
lands.
Runs on mach3 on windows, I'll include the desktop and everything seen
here. I'm guessing it weighs around 150lbs, definitely need a couple
people
to move it.
Let me know if I can answer any other questions!
Cheers,
Jack
[image: IMG_8531.jpg][image: IMG_8545.jpg][image:
59E3DE31-F32F-4040-826D-ECF25814A53F.JPG]
12:46 a.m.
I can assist in other ways that don’t involve lifting like finding an
appropriate vehicle.
On Thu, Aug 12, 2021 at 12:44 AM Adam Munich <me(a)adammunich.com> wrote:
I do not share Jake’s concern and think this would be
a fantastic tool.
I’ll get it working and also set up attachments for lasers and such.
But right now I’m in no position to move heavy things until my back heals.
Would you be able to bring it to west Oakland?
On Wed, Aug 11, 2021 at 8:20 PM Jack Kern <jack.w.kern(a)gmail.com> wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
I wasn’t really expecting there to be room at
sudo, I just know there are
a lot of like minds there and maybe someone wants it for themselves. :)
On Wed, Aug 11, 2021 at 7:15 PM Jake <jake(a)spaz.org> wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
Hi Jack! I think I remember using this back at
Sudoroom in 2012 at the
original space on 22nd street!
Thank you so much for letting us use it. It's a generous offer, but I'm
a
little concerned that the Z-axis is limited to just a couple of inches of
travel, and there's no way to machine parts greater than a couple of
inches
thick? Is that right?
While i'm very grateful for your support of sudoroom and your offer, i'm
hesitant to say that I think we have the space for it.
Full disclosure though, I brought our Yaskawa K10S robot which works as
a very
large CNC! I look forward to firing it up again and showing people how
to use
it.
-jake
On Wed, 11 Aug 2021, Jack Kern wrote:
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
Many years ago I had my small CNC hosted at sudo,
I don't think it got
much
use as I wasn't around to help people learn
it. Currently that machine
is
just sitting in storage now and it feels like a
waste to keep it
there. I'm
trying to clear out this storage unit and my move
out date is the 28th
of
this month.
The system was gifted to me, and I have since gotten it working again
and
learned a bunch -- I would love to pass that gift
along to someone
else who
has the time and space to actually use this
thing! I would be happy to
help
with setup and getting it running wherever it
lands.
Runs on mach3 on windows, I'll include the desktop and everything seen
here. I'm guessing it weighs around 150lbs, definitely need a couple
people
to move it.
Let me know if I can answer any other questions!
Cheers,
Jack
[image: IMG_8531.jpg][image: IMG_8545.jpg][image:
59E3DE31-F32F-4040-826D-ECF25814A53F.JPG]
3:09 p.m.
@Jack
I haven’t heard back from you yet, but I want to reach out again and say I
will commit to getting this thing usable by us hackers if you haven’t
already given it away.
-Adam
On Thu, Aug 12, 2021 at 12:46 AM Adam Munich <me(a)adammunich.com> wrote:
I can assist in other ways that don’t involve lifting
like finding an
appropriate vehicle.
On Thu, Aug 12, 2021 at 12:44 AM Adam Munich <me(a)adammunich.com> wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
I do not share Jake’s concern and think this
would be a fantastic tool.
I’ll get it working and also set up attachments for lasers and such.
But right now I’m in no position to move heavy things until my back
heals. Would you be able to bring it to west Oakland?
On Wed, Aug 11, 2021 at 8:20 PM Jack Kern <jack.w.kern(a)gmail.com> wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
I wasn’t really expecting there to be room at
sudo, I just know there
are a lot of like minds there and maybe someone wants it for themselves. :)
On Wed, Aug 11, 2021 at 7:15 PM Jake <jake(a)spaz.org> wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
Hi Jack! I think I remember using this back at
Sudoroom in 2012 at the
original space on 22nd street!
Thank you so much for letting us use it. It's a generous offer, but
I'm a
little concerned that the Z-axis is limited to just a couple of inches
of
travel, and there's no way to machine parts greater than a couple of
inches
thick? Is that right?
While i'm very grateful for your support of sudoroom and your offer, i'm
hesitant to say that I think we have the space for it.
Full disclosure though, I brought our Yaskawa K10S robot which works as
a very
large CNC! I look forward to firing it up again and showing people how
to use
it.
-jake
On Wed, 11 Aug 2021, Jack Kern wrote:
> Many years ago I had my small CNC hosted at sudo, I don't think it
got much
> use as I wasn't around to help people learn it. Currently that
machine is
> just sitting in storage now and it feels like a waste to keep it
there. I'm
> trying to clear out this storage unit and my move out date is the
28th of
> this month.
>
> The system was gifted to me, and I have since gotten it working again
and
> learned a bunch -- I would love to pass that gift along to someone
else who
> has the time and space to actually use this thing! I would be happy
to help
> with setup and getting it running wherever it lands.
>
> Runs on mach3 on windows, I'll include the desktop and everything seen
> here. I'm guessing it weighs around 150lbs, definitely need a couple
people
> to move it.
>
> Let me know if I can answer any other questions!
>
> Cheers,
>
> Jack
>
> [image: IMG_8531.jpg][image: IMG_8545.jpg][image:
> 59E3DE31-F32F-4040-826D-ECF25814A53F.JPG]
>
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
4:58 p.m.
Sorry for the late reply!
I can definitely donate it to the space and would love to know it’s going
to get some use. Would either Saturday or Sunday work? I have a friend that
can help me on the loading side but I would need a hand or two moving it to
sudo.
Jack
On Thu, Aug 12, 2021 at 3:11 PM Yardena Cohen <yardenack(a)gmail.com> wrote:
I can help move it in my car if you all decide where
you want it to be.
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
8:55 p.m.
I’m flexible, how about everyone else?
On Thu, Aug 12, 2021 at 4:59 PM Jack Kern <jack.w.kern(a)gmail.com> wrote:
Sorry for the late reply!
I can definitely donate it to the space and would love to know it’s going
to get some use. Would either Saturday or Sunday work? I have a friend that
can help me on the loading side but I would need a hand or two moving it to
sudo.
Jack
On Thu, Aug 12, 2021 at 3:11 PM Yardena Cohen <yardenack(a)gmail.com> wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
I can help move it in my car if you all decide
where you want it to be.
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
13 Aug
13 Aug
1:34 p.m.
I guess I’d prefer tomorrow afternoon if possible. I’m moving it from
Antioch.
Jack
On Thu, Aug 12, 2021 at 8:55 PM Adam Munich <me(a)adammunich.com> wrote:
I’m flexible, how about everyone else?
On Thu, Aug 12, 2021 at 4:59 PM Jack Kern <jack.w.kern(a)gmail.com> wrote:
Sorry for the late reply!
I can definitely donate it to the space and would love to know it’s going
to get some use. Would either Saturday or Sunday work? I have a friend that
can help me on the loading side but I would need a hand or two moving it to
sudo.
Jack
On Thu, Aug 12, 2021 at 3:11 PM Yardena Cohen <yardenack(a)gmail.com>
wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
I can help move it in my car if you all decide
where you want it to be.
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
1:36 p.m.
I can be available then, we can unload it at hearth in west Oakland and
then move it from there when more sudo people are in town (a lot are
traveling)
On Fri, Aug 13, 2021 at 1:35 PM Jack Kern <jack.w.kern(a)gmail.com> wrote:
I guess I’d prefer tomorrow afternoon if possible. I’m
moving it from
Antioch.
Jack
On Thu, Aug 12, 2021 at 8:55 PM Adam Munich <me(a)adammunich.com> wrote:
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
I’m flexible, how about everyone else?
On Thu, Aug 12, 2021 at 4:59 PM Jack Kern <jack.w.kern(a)gmail.com> wrote:
-- Sorry for the late reply!
I can definitely donate it to the space and would love to know it’s
going to get some use. Would either Saturday or Sunday work? I have a
friend that can help me on the loading side but I would need a hand or two
moving it to sudo.
Jack
On Thu, Aug 12, 2021 at 3:11 PM Yardena Cohen <yardenack(a)gmail.com>
wrote:
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
I can help move it in my car if you all decide
where you want it to be.
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
14 Aug
14 Aug
7:37 a.m.
On Fri, Aug 13, 2021 at 8:37 PM Adam Munich <me(a)adammunich.com> wrote:
I can be available then, we can unload it at hearth in
west Oakland and
then move it from there when more sudo people are in town (a lot are
traveling)
I can help with physical movement of stuff after August 15th.
--
marc/juul
18 Aug
18 Aug
9:46 a.m.
New subject: Looking to gift a used CNC to anyone who has the space/time
It seems settled but I fully vouch for this machine - great for milling
aluminum plate and wood and whatnot. With some ball end mills could be
used to make really nice terrain replicas or low rise architectural
models. I still have one of the aluminum plates we milled a random bolt
circle into, I remember those early sudo days fondly.
Hack on y'all.
Cheers,
Hol
On 2021-08-13 3:36 pm, Adam Munich wrote:
I can be available then, we can unload it at hearth in
west Oakland and
then move it from there when more sudo people are in town (a lot are
traveling)
On Fri, Aug 13, 2021 at 1:35 PM Jack Kern <jack.w.kern(a)gmail.com>
wrote:
I guess I'd prefer tomorrow afternoon if possible. I'm moving it from
Antioch.
Jack
On Thu, Aug 12, 2021 at 8:55 PM Adam Munich <me(a)adammunich.com> wrote:
I'm flexible, how about everyone else?
On Thu, Aug 12, 2021 at 4:59 PM Jack Kern <jack.w.kern(a)gmail.com>
wrote:
Sorry for the late reply!
I can definitely donate it to the space and would love to know it's
going to get some use. Would either Saturday or Sunday work? I have a
friend that can help me on the loading side but I would need a hand or
two moving it to sudo.
Jack
On Thu, Aug 12, 2021 at 3:11 PM Yardena Cohen <yardenack(a)gmail.com>
wrote: I can help move it in my car if you all decide where you want it
to be.
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
--
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility. --
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
19 Aug
19 Aug
7:40 p.m.
New subject: Looking to gift a used CNC to anyone who has the space/time
"I look forward to firing it up again and showing people how to use
it."
Hell yes. Can we use it to lift and install the new CNC?
Its good for more than tea, I hope.
On Wednesday, August 11, 2021, 07:15:44 PM PDT, Jake <jake(a)spaz.org> wrote:
Hi Jack! I think I remember using this back at Sudoroom in 2012 at the
original space on 22nd street!
Thank you so much for letting us use it. It's a generous offer, but I'm a
little concerned that the Z-axis is limited to just a couple of inches of
travel, and there's no way to machine parts greater than a couple of inches
thick? Is that right?
While i'm very grateful for your support of sudoroom and your offer, i'm
hesitant to say that I think we have the space for it.
Full disclosure though, I brought our Yaskawa K10S robot which works as a very
large CNC! I look forward to firing it up again and showing people how to use
it.
-jake
On Wed, 11 Aug 2021, Jack Kern wrote:
Many years ago I had my small CNC hosted at sudo, I
don't think it got much
use as I wasn't around to help people learn it. Currently that machine is
just sitting in storage now and it feels like a waste to keep it there. I'm
trying to clear out this storage unit and my move out date is the 28th of
this month.
The system was gifted to me, and I have since gotten it working again and
learned a bunch -- I would love to pass that gift along to someone else who
has the time and space to actually use this thing! I would be happy to help
with setup and getting it running wherever it lands.
Runs on mach3 on windows, I'll include the desktop and everything seen
here. I'm guessing it weighs around 150lbs, definitely need a couple people
to move it.
Let me know if I can answer any other questions!
Cheers,
Jack
[image: IMG_8531.jpg][image: IMG_8545.jpg][image:
59E3DE31-F32F-4040-826D-ECF25814A53F.JPG]
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
984
days inactive
992
days old
13 comments
7 participants
participants (7)
-
Adam Munich -
hol＠gaskill.com -
Ian C -
Jack Kern -
Jake -
Marc Juul -
Yardena Cohen