29 Aug
2014
29 Aug
'14
1:01 p.m.
from the email you forwarded:
"I'm so excited to become a part of the Omni collective. In walking
around the building I've identified an area I think will work well for
my studio. It is the current utility room and kitchen adjacent to the
cafe. Since the kitchen will be moved downstairs anyway I figure we can
take down the non load bearing wall between those two spaces and make it
an area big enough to house my printing press, heaters, tables and
storage."
there was another proposal on the table for La Commune to block the
entire entry via the door we normally take to access sudo/ccl after 6pm,
with the suggested alternative that we have access via the doors at the
end of the hallway/kitchen onto 48th street. i don't think splitting
access to a separate entryway after 6pm is the preferred alternative
from hearing everyone's input, but if it were there would be a potential
conflict between that idea and converting the area that is now the
kitchen into a printshop.
cheers
On 2014-08-29 11:47, David Keenan wrote:
Sorry hol.. I know yr probably at work but -
what'r ya askin about the hallway?
I was just saying, in the detail drawing there is enough room for the press, but it
doesn't seem to match what I measured in real life - I was hoping someone could go
check real quick, and maybe measure the width of the kitchen-area hallway too.
David
On Fri, Aug 29, 2014 at 11:39 AM, <hol(a)gaskill.com> wrote:
so nothing in the hallway?
On 2014-08-29 11:34, David Keenan wrote:
Patrik:
Since riseup limits attachment size I sent the perhaps-partially-deprecated floorplans
for the NW corner and upstairs mezzanine as marked up by our architect for john (since he
wanted to be able to approve far in advance.)
Hol: Good point..
And now actually looking at the detail drawings I see it says 13'3" N-S in the
'ice room' (aka utility room, aka garbage room.) That would be enough room for
Gabriela's press with no modification to walls. But. I feel like when we or Gabriela
measured it in person (I can't remember who did so), it was definitely less (why I
proposed the pony wall be moved back).
Can someone actually go re-measure the width of this room, from 48th st side, to the
hallway wall, so we know what it is?
David
On Fri, Aug 29, 2014 at 11:19 AM, <hol(a)gaskill.com> wrote:
it would be good to see a drawing of the area being proposed since there seems to be some
confusion
On 2014-08-29 11:12, Patrik D'haeseleer wrote:
On Fri, Aug 29, 2014 at 11:01 AM, David Keenan <dkeenan44(a)gmail.com> wrote:
What should happen is our earlier-discussed (and approved by john, if we want to do it)
floorplan of putting doors into the north sides of both the storage rooms to provide
further means of egress from CCL.
If there is a floorplan already approved with John, please share it - because I have not
seen anything on paper, and I don't think that what you have in mind is the same as
what I've been talking about!
With this in mind, I think the NE room would be a better room for CCL's lab, if that
is an option for you guys? It is a bigger room, and putting a doorway in the storage room
closer to the hallway would allow essentially a straight shot through to the double-doors
on 48th - Such access could be really useful for example to bring a scissor lift into
Sudo/CCL so it does not have to make turns, as well.
What I have been suggesting is to route the exit through the small room in between the
two storage rooms. That would indeed be a straight shot, and would not affect either
storage room. But we would need somebody to check whether the doorway width we can achieve
there would be up to code.
Patrik
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://lists.sudoroom.org/listinfo/sudo-discuss [1]
Links:
------
[1] https://lists.sudoroom.org/listinfo/sudo-discuss