17 Jun
2019
17 Jun
'19
noon
Hey y'all! Long time, but I'm thinking my health is finally getting to the
point where I might be able to grace the halls of sudo once more.
Next term, I'll be taking diffeq, and part of the class is coming up with
real-world applications of differential equations and then solving them. I
came to the conclusion pretty quickly that I also wanted to build
something, and while dreaming of cat toys and thinking about pendulums, I
realized I was missing the obvious solution: pendulum clocks.
There are quite a few resources out there for building a pendulum clock,
some of them 3D printable and some of them wooden, but I was leaning more
towards doing one in wood, although possibly printing the timing wheel,
then sharpening it down more precisely by hand.
I'm currently looking at basing it off of these plans:
http://www.woodenclocks.co.uk/Clock%207-PR-3.PDF
So my questions are:
Does anyone have any experience with clock building?
How is the laser cutter functioning currently?
Are there any issues a novice clockbuilder should look out for?
What questions haven't I thought of?
--
Currently Reading
<https://www.goodreads.com/user/email_signature_destination/35215676?utm_medium=reading_link&utm_source=email_signature>
[image: Book Cover]
<https://www.goodreads.com/user/email_signature_destination/35215676?utm_medium=cover&utm_source=email_signature>
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
17 Jun
17 Jun
7:52 p.m.
Laser cutter should be operable --ask rayc, he was the last to use it.
For your own sanity I would recommend making the movement gears themselves
out of PMMA, wood has a tendency to get stuck.
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
On Mon, Jun 17, 2019 at 12:00 PM Ryan <yandoryn(a)gmail.com> wrote:
Hey y'all! Long time, but I'm thinking my
health is finally getting to the
point where I might be able to grace the halls of sudo once more.
Next term, I'll be taking diffeq, and part of the class is coming up with
real-world applications of differential equations and then solving them. I
came to the conclusion pretty quickly that I also wanted to build
something, and while dreaming of cat toys and thinking about pendulums, I
realized I was missing the obvious solution: pendulum clocks.
There are quite a few resources out there for building a pendulum clock,
some of them 3D printable and some of them wooden, but I was leaning more
towards doing one in wood, although possibly printing the timing wheel,
then sharpening it down more precisely by hand.
I'm currently looking at basing it off of these plans:
http://www.woodenclocks.co.uk/Clock%207-PR-3.PDF
So my questions are:
Does anyone have any experience with clock building?
How is the laser cutter functioning currently?
Are there any issues a novice clockbuilder should look out for?
What questions haven't I thought of?
--
Currently Reading
<https://www.goodreads.com/user/email_signature_destination/35215676?utm_medium=reading_link&utm_source=email_signature>
[image: Book Cover]
<https://www.goodreads.com/user/email_signature_destination/35215676?utm_medium=cover&utm_source=email_signature>
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#m_-2239522115305201233_m_-1509668075931792121_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
10:35 p.m.
There is an issue with the laser cutter but rumor has it that it's
just a loose USB connector so feel free to re-solder it or replace it
and you should be good to go.
On 6/17/19, Adam Munich <me(a)adammunich.com> wrote:
Laser cutter should be operable --ask rayc, he was the
last to use it.
For your own sanity I would recommend making the movement gears themselves
out of PMMA, wood has a tendency to get stuck.
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
On Mon, Jun 17, 2019 at 12:00 PM Ryan <yandoryn(a)gmail.com> wrote:
Hey y'all! Long time, but I'm thinking my
health is finally getting to
the
point where I might be able to grace the halls of sudo once more.
Next term, I'll be taking diffeq, and part of the class is coming up with
real-world applications of differential equations and then solving them.
I
came to the conclusion pretty quickly that I also wanted to build
something, and while dreaming of cat toys and thinking about pendulums, I
realized I was missing the obvious solution: pendulum clocks.
There are quite a few resources out there for building a pendulum clock,
some of them 3D printable and some of them wooden, but I was leaning more
towards doing one in wood, although possibly printing the timing wheel,
then sharpening it down more precisely by hand.
I'm currently looking at basing it off of these plans:
http://www.woodenclocks.co.uk/Clock%207-PR-3.PDF
So my questions are:
Does anyone have any experience with clock building?
How is the laser cutter functioning currently?
Are there any issues a novice clockbuilder should look out for?
What questions haven't I thought of?
--
Currently Reading
<https://www.goodreads.com/user/email_signature_destination/35215676?utm_medium=reading_link&utm_source=email_signature>
[image: Book Cover]
<https://www.goodreads.com/user/email_signature_destination/35215676?utm_medium=cover&utm_source=email_signature>
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#m_-2239522115305201233_m_-1509668075931792121_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
10:44 p.m.
The usb has always been loose, it is a feature of USB type A.
just use a very good cable and don't wiggle it.
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
On Mon, Jun 17, 2019 at 10:35 PM Marc Juul <marc(a)juul.io> wrote:
There is an issue with the laser cutter but rumor has
it that it's
just a loose USB connector so feel free to re-solder it or replace it
and you should be good to go.
On 6/17/19, Adam Munich <me(a)adammunich.com> wrote:
Laser cutter should be operable --ask rayc, he
was the last to use it.
For your own sanity I would recommend making the movement gears
themselves
out of PMMA, wood has a tendency to get stuck.
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
On Mon, Jun 17, 2019 at 12:00 PM Ryan <yandoryn(a)gmail.com> wrote:
> Hey y'all! Long time, but I'm thinking my health is finally getting to
> the
> point where I might be able to grace the halls of sudo once more.
>
> Next term, I'll be taking diffeq, and part of the class is coming up
with
> real-world applications of differential
equations and then solving them.
> I
> came to the conclusion pretty quickly that I also wanted to build
> something, and while dreaming of cat toys and thinking about pendulums,
I
> realized I was missing the obvious solution:
pendulum clocks.
>
> There are quite a few resources out there for building a pendulum clock,
> some of them 3D printable and some of them wooden, but I was leaning
more
> towards doing one in wood, although possibly
printing the timing wheel,
> then sharpening it down more precisely by hand.
>
> I'm currently looking at basing it off of these plans:
> http://www.woodenclocks.co.uk/Clock%207-PR-3.PDF
>
> So my questions are:
>
> Does anyone have any experience with clock building?
> How is the laser cutter functioning currently?
> Are there any issues a novice clockbuilder should look out for?
> What questions haven't I thought of?
>
> --
> Currently Reading
> <
https://www.goodreads.com/user/email_signature_destination/35215676?utm_med…
> [image: Book Cover]
> <
https://www.goodreads.com/user/email_signature_destination/35215676?utm_med…
>
>
> <
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&…
> Virus-free.
> www.avg.com
> <
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&…
>
<#m_-2239522115305201233_m_-1509668075931792121_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
20 Jun
20 Jun
7:07 p.m.
Ryan, i have no knowledge to answer your questions but wanted to convey how
overjoyed I am at the prospect of hanging out with you in sudoroomland once
again!
Love and misses!
<3
On Mon, Jun 17, 2019, 22:45 Adam Munich <me(a)adammunich.com> wrote:
The usb has always been loose, it is a feature of USB
type A.
just use a very good cable and don't wiggle it.
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
On Mon, Jun 17, 2019 at 10:35 PM Marc Juul <marc(a)juul.io> wrote:
There is an issue with the laser cutter but rumor
has it that it's
just a loose USB connector so feel free to re-solder it or replace it
and you should be good to go.
On 6/17/19, Adam Munich <me(a)adammunich.com> wrote:
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
Laser cutter should be operable --ask rayc, he
was the last to use it.
For your own sanity I would recommend making the movement gears
themselves
out of PMMA, wood has a tendency to get stuck.
- - - -
Weblog: http://adammunich.com
With great power comes great responsibility.
On Mon, Jun 17, 2019 at 12:00 PM Ryan <yandoryn(a)gmail.com> wrote:
> Hey y'all! Long time, but I'm thinking my health is finally getting to
> the
> point where I might be able to grace the halls of sudo once more.
>
> Next term, I'll be taking diffeq, and part of the class is coming up
with
> real-world applications of differential
equations and then solving
them.
> I
> came to the conclusion pretty quickly that I also wanted to build
> something, and while dreaming of cat toys and thinking about
pendulums, I
> realized I was missing the obvious solution:
pendulum clocks.
>
> There are quite a few resources out there for building a pendulum
clock,
> some of them 3D printable and some of them
wooden, but I was leaning
more
> towards doing one in wood, although possibly
printing the timing wheel,
> then sharpening it down more precisely by hand.
>
> I'm currently looking at basing it off of these plans:
> http://www.woodenclocks.co.uk/Clock%207-PR-3.PDF
>
> So my questions are:
>
> Does anyone have any experience with clock building?
> How is the laser cutter functioning currently?
> Are there any issues a novice clockbuilder should look out for?
> What questions haven't I thought of?
>
> --
> Currently Reading
> <
https://www.goodreads.com/user/email_signature_destination/35215676?utm_med…
> [image: Book Cover]
> <
https://www.goodreads.com/user/email_signature_destination/35215676?utm_med…
>
>
> <
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&…
> Virus-free.
> www.avg.com
> <
http://www.avg.com/email-signature?utm_medium=email&utm_source=link&…
>
<#m_-2239522115305201233_m_-1509668075931792121_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________
sudo-discuss mailing list
sudo-discuss(a)lists.sudoroom.org
https://sudoroom.org/lists/listinfo/sudo-discuss
1777
days inactive
1781
days old
4 comments
4 participants
participants (4)
-
Adam Munich -
Jenny Ryan -
Marc Juul -
Ryan