sudo-discuss

sudo-discuss@sudoroom.org

4 participants
7445 discussions

by Chris Bee

Hey sudologists- It seems that we have become a locus of sorts for bikes in various states of disrepair, and they're starting to pile up in sudo. Until we (or I) can get on top of the situation, can we keep the bike population where it's at by holding off on donations/projects for the time being? Or, can we come up with a better storage solution for the less likely candidates for immediate rehabilitation? We're currently at seven bikes in sudo proper, which is awesome on one hand but slightly overwhelming on the other. (side note to Jenny- this does not apply to you, I agreed to help you with your fuzzy blue Grover bike and that's still on...I'm currently waiting on the tools to get 'er done. Inshallah.) -chrisbee

12 years, 1 month

datashield power strip is shite

by Jake

I plugged my laptop into this weird power strip thingy, a Datashield Model 85, that is from the Beige era of computing. i noticed a while later that it was not powered - so i hit the reset button on the power strip, and it clicked and came back on. after the third time i figured it was no good, and needed to be repaired and not used until then, so i was going to unplug it. But i saw something else was plugged into it, from far away via an extension cord. The new color laser printer! Oh Noes!! the poor printer was getting turned on and off repeatedly due to this bullshit powerstrip thing. So if the laser printer is upset now, it may be because of repeated on and off, which they don't like. I recommend it be plugged into a reliable power socket, so it can be on or off, and if left on it can go to sleep without being suddenly off and on again all the time. -jake

12 years, 1 month

A College Kid Couldn't Afford a 3D Printer, So He Built One Himself

by Eden In Oakland

http://mashable.com/2013/12/20/deltaprintr-3d-printer/?utm_cid=mash-com-g+-… A College Kid Couldn't Afford a 3D Printer, So He Built One Himself Deltaprintr Makes 3D Printing Affordable Show As List By Samantha Murphy Kelly1 day ago When college student Shai Schechter didn't have access to an affordable 3D printer on his SUNY Purchase campus in New York, he set out to build his own model — one that would still crank out 3D-printed objects, but at a much lower cost. "We have a laser- and powder-based 3D printer at school, but it costs about $500 for a bucket of powder and that only lasts for about one or two prints," Schechter said. "It's never used because it is so expensive and classes weren’t offered that much in the curriculum." He approached his sculpture professor about building a new 3D printer that uses plastic instead, and sought the help of three good friends. Schecter and his business partners launched a Kickstarter campaign to bring their low-cost design to the masses; the project nearly sold out of preorders in the first week alone. While a new MakerBot 3D printer costs $2,000, the Deltraprintr is significantly less: $475 unassembled or $685 assembled. It's available in two sizes, either 2 feet high (large) or 2.5 feet (extra large). "We are targeting educational institutions first, so people can learn how to assemble them," Schecter said. "When you buy a MakerBot, and you read a manual about how to use it, you don't learn a lot about how the printer and technology works. This is why we are offering the assembly manual on Kickstarter, too — we want people to really get their hands on it." The Deltaprintr uses three stepper motors, located under the acrylic platform where the objects are printed. Motors control the carriages that move the hot end and ultimately create the 3D-printed objects. Since a Deltaprintr design doesn't rqeuire as many parts as other 3D printers, the savings are passed on to consumers. "MakerBot uses belts to move the print head, but ours uses a fishing line," Schechter said. "With the fishing line, you can expand it to make it taller if you want by changing the aluminum rods. It allows it to go faster than the MakerBot and is more accurate. It allows it to go faster than the MakerBot and is more accurate." Although the Deltaprintr team is focusing on getting the product off the ground as an educational tool, it's eying the mass market, too. "We want it to have a place in education, but it's still for the everyday user," Schechter said. "We have a lot of ideas that we plan to execute in the next year to make the Deltaprintr even better and lower the cost even more." Image: Mashable, Christina Ascani Have something to add to this story? Share it in the comments. BONUS: I 3D Printed a Gun Topics: 3D, 3d printer, 3D printing, Apps and Software, Gadgets, kickstarter, Tech

12 years, 1 month

A College Kid Couldn't Afford a 3D Printer, So He Built One Himself

by Eden In Oakland

12 years, 1 month

Peer Production Project

by Eddan Katz

Hi Sudo folk. Happy Holidays. Hope everyone's getting some quality time with friends and family. and Happy New Year to those of you already heading off somewhere for vacation. 2141 Broadway Looking ahead to 2014, this email is about buying and rental possibilities for the current building 2135-2143 Broadway with actual numbers. If you'd like to get in touch with the landlords directly, you can email Laurie Cooperman Rosen at lscoop(a)comcast.net; or call George Rosen at 510-504-4259. I wanted to update everyone on a meeting Matt & I had with the landlord earlier this month about the possibilities regarding renting/selling/co-op equity of the building where Sudo Room and the Bay Area Public School are currently located. Matt - please correct any of the information that I may have missed or gotten wrong in the inset text below. Since the Bay Area Public School and Sudo Room may (or may not) imminently be moving to the Omni or other location, a new list has been created to further discussion and coalition-building that will continue to take place in the current space at http://lists.sudoroom.org/listinfo/hall. This proposal, to be very clear, does not and will not interfere with any of those plans to move nor with plans to stay at the current location decided by the collective of collectives. Below are the notes regarding how much the southern section of the 2143-2145 Broadway have been rented for in the past, how much they're willing to rent each room individually, the whole floor as a whole, and a graduated occupancy/rate proposal that gives time to attract other potential collaborators visiting the space, and getting a reduced price for the rental of that whole section of $6,500/month for 3 months. Otherwise, according to the proposal discussed, rental of the floor will go up to the market rental price of $8,500 at the end of that 3 months. The other option that has been discussed is putting together a co-op sale where groups and individuals can buy equity in that section of the building, either as a real estate transaction, or as crowd-funding equity shares. Group and individual ownership will participate in any profits and in the governance of the building. Peer Production / Sudo Hall The resulting community will be provisionally called Peer Production. In order to honor the pivotal role that Sudo Room and the other people that first moved into this building have accomplished for the community, the proposed discussion list will be called Sudo Hall. It will also be a priority of the Peer Production project to reach out to the innovative and inspiring stories of the other tenants that are already in the building - including Sound Room, Uptown Kitchen, Yummmeee, and the Pan Theater, among others. In terms of values, integrating with the community we're in and remaining inclusive to attract a broad spectrum of types of people will take priority over political posturing and ideological orthodoxy. The community invitation to join is intended to be welcoming to for-profit, non-profit, small partnership, crowd-fund equity start-up, cooperative corporation, and any other structure under which people best think they can get done what they want to achieve. The objective of Peer Production {Sudo Hall} still aspires to the core of Sudo Room's early description: Doing stuff together to make our community more openly accessible. Peer Production, I believe, is the common thread of the innovative and socially conscious projects that have emerged. If you'd like to talk about this further or just find out what's going on - you can join the Sudo Hall mailing list at http://lists.sudoroom.org/listinfo/hall. We'll take it offline from the sudo-discuss list, but I just wanted to let folks know that this discussion just got started. First order of business is getting more photos and more data about the place. Sudo Room has started a good page at https://sudoroom.org/wiki/2141_Broadway and hopefully there can be more valuable and useful information that will be available through Peer Production and Sudo Hall. > 2135-2143 Broadway > Dec. 6, 2013. 5pm. > > George Rosen. > Matt Senate. > Eddan Katz. > > ---- > Sudo-Hall > > University used to pay $14,000 for the whole floor. > EBMC paid $6,500. 8% annual increase. > > Sudo Room. $1500 > Robert. $1,000 > Dance Studio. $1,100 > Public School. $950. > Room next to it. $950. > Yellow Room $2,500. > Corner Room. $2,200. (access to roof). > > total now at $8,500. > willing to do $6,500. > > > ---- > extra notes > building $5.3 million. > 1.2 million fees. > > Buy - income stream. $4 million for whole building. > > losing $65,000 per year by them being empty. > > $1 million selling price for Sudo Hall wing. > > > Need to do pictures of rooms. & sq. ft. > send photos. > Non-profit rental. > > $6,500 x 3 mos. > whole floor - to start with - $13,000. >

12 years, 1 month

Happy t shirts and decentralized sudoroom processes

by Romy Ilano

I'm happy that the t shirt idea is spawning all sorts of creative designs! It's like a github source code. Everyone is tweaking the idea I'm excited to see what weird creative things happen next Thanks sudoroom. ! Sent from my iPhone

12 years, 1 month

Tmrw (12/21): Today We Learned: Weekly open, chill co-learning at Sudo Room from 2-5PM

by Marina Kukso

Hi everyone, Tomorrow (and every Sat.) from 2-5PM at Sudo Room <http://sudoroom.org>we'll be doing "Today We Learned <https://sudoroom.org/wiki/Today_We_Learned>," weekly, open, super chill co-learning. What is co-learning? It means that you bring something you're working on or something you want to learn more about, maybe some other folks are interested in it as well and want to collaborate, or maybe you see what someone else is working on and want to help with that. Well what can you bring to learn about? Anything! One time when we were doing a similar event at LOL space <http://oaklandmakerspace.wordpress.com>, someone brought a broken clock and we tried to figure out how to fix it. Many times folks work on programming stuff. Sometimes we follow rabbit trails and try to explain and understand things like "well how do computers really work." If it's a thing to learn, we can learn it. We also have a projector set up if anyone wants to demo anything - anything - so you should feel free to bring something that you'd like to share. See you tomorrow! Marina

12 years, 1 month

Re: [sudo-discuss] 2nd OMNI trip: Thursday 3:30pm TOMORROW

by David Keenan

Newly-updated list of attendees tomorrow: *Sudo Room*: Max Klein, Matt Senate, Jordan Cohen *SALTA*: Sarah Pritchard *Bay Area Public School*: Alana Siegel, Lara Durback, and I Margit Galanter (dancer) Liz Leger (visual artist) Ali Tonak (activist) Katherine Harr (tenants' rights activist) Best, David

12 years, 1 month

Proposal to Galvanize

by Matthew Senate

Hey all, I have a proposal I'd like some feedback on and to discuss at the next meeting at the public school this Thursday (7pm right?) *Proposal: * Out of the attendees of these meetings (including folks on the list below), to find some number of interested collectives, individuals, organizations, small businesses, etc to rent the $900-$950 / mo. office adjacent to the Bay Area Public School (BAPS), sharing the common space with BAPS and the Sudo Room at 2141 Broadway in Oakland. For instance, at ~18 equal parties, this room can be rented for $50 / mo. I am personally interested in coordinating several folks to use part of the space as "sudo coworking" with a few small desks for individual work. The intention of this rental is multiple-fold: * To no longer delay in solidifying collaboration between various groups--i.e. for other folks to join BAPS and the Sudo Room by sharing space now. * To commit to investing (minimally) financially in a venture that requires communication, collaboration, and sharing. * To engage in a learning experience about our ability to co-operate and grow. * To provide an opportunity to groups that currently do not have a space to galvanize their community. * To be able to fruitfully engage in a comparison between various group rental options including The Omni, 8th and Alice, and even 2141 Broadway. https://sudoroom.org/wiki/The_Omni https://sudoroom.org/wiki/8th_and_Alice https://sudoroom.org/wiki/2141_Broadway https://sudoroom.org/wiki/Spaces *List (in no particular order):* - * Timeless infinite light<http://space.sudoscience.org/index.php/Possible_Groups#Timeless_infinite_li…> - * sudo mesh<http://space.sudoscience.org/index.php/Possible_Groups#sudo_mesh> - * Prelinger Library<http://space.sudoscience.org/index.php/Possible_Groups#Prelinger_Library> - * Local Flavor<http://space.sudoscience.org/index.php/Possible_Groups#Local_Flavor> - * Planting Justice<http://space.sudoscience.org/index.php/Possible_Groups#Planting_Justice> - * Spokeland<http://space.sudoscience.org/index.php/Possible_Groups#Spokeland> - * Fix-It Clinic<http://space.sudoscience.org/index.php/Possible_Groups#Fix-It_Clinic> - * CorpWatch<http://space.sudoscience.org/index.php/Possible_Groups#CorpWatch> - * Sudo Co-Working<http://space.sudoscience.org/index.php/Possible_Groups#Sudo_Co-Working>

12 years, 1 month

Fwd: [Double-Union] DU partnership with Lesbians Who Tech (and the people who love them)

by Marina Kukso

---------- Forwarded message ---------- From: Lillie Chilen <lillie.chilen(a)gmail.com> Date: Wed, Dec 18, 2013 at 9:07 PM Subject: [Double-Union] DU partnership with Lesbians Who Tech (and the people who love them) To: doubleunion(a)lists.doubleunion.org Double Union is partnering with an awesome organization, Lesbians Who Tech, to get the word out for their first summit<http://lesbianswhotech.org/summit/>, this February 28th in San Francisco. They're offering Double Union members and friends a 25% discount for tickets with the code LWTDU. The event is open to queer women and the people who love them, so feel free to share the discount code with other technically-inclined people who you think could benefit! More details + registration: http://lesbianswhotech.org/summit/ All the best, Lillie -- Lillie Chilen @lilliealbert ('li-lee shuh-'leen) _______________________________________________ Doubleunion mailing list Doubleunion(a)lists.doubleunion.org http://lists.doubleunion.org/listinfo.cgi/doubleunion-doubleunion.org

12 years, 1 month

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

sudo-discuss